Search Results

The increase in the number of elderly people requires multiple efforts to maintain their well-being and health. A wide variety of products and services have been created to enable seniors to live at home for as long as possible. The market success of these solutions depends on acceptance by the different stakeholders. Older people are…

Vegetable oils are often proved to be promising for industrial lubrication applications among which soybean oil found to be better due to its attractive and desirable thermo physical properties for machining compared to other vegetable oils. However, already it was established that influenced desirable thermophysical properties necessary for a vegetable oil through which better machining…

Location-based services have become increasingly prevalent with the advancement in the positioning capabilities of smart devices and their emergence in social networking. In order to acquire a service, users must submit their identity, query interest and location details to service providers. Such information shared by users are accumulated continuously, stored and analyzed in order to…

Rural electrification and sustainable energy services to the less privileged is à major challenge faced in Nigeria. Off-grid power generation via small hydropower plant would mitigate this challenge. This Paper discusses the awareness and assessment of small hydro power for off-grid electrification in rural/isolated areas in Nigeria. In this research, the method of onsite data…

All trucks heading into the paper mill MONDI, Slovakia, have to pass an automatic security check. It controls if storage of its wood load meets all standards of safety. Each truck is scanned by a group of 2D scanners. After that the inspection of timber load is done by a software with use of the…

Different models and standards of information security were analyzed, to adopt a model that mitigates vulnerabilities, risks and threats in the quota allocation process for the State University in Ecuador. The main objective is defining a prototype for the management of processes and information security in this type of organization. It was used the deductive…

The need for air conditioning in rural areas where there is no source of electricity, leads to look for alternative solutions. Usage of Solar thermal system drive vapor jet refrigeration cycle (VJRC) instead of the traditional air conditioning systems, contributes in the reduction of the Global Worming and Ozone Depletion. The main objective of this…

The research presents a statistical analysis that characterize the environment of the admitted students to Higher Public Education Institutions, by providing an overview of student’s distribution to the courses of studies offered by universities in Albania, such as, economy, medicine, technical etc., and grouping them according to the relative density of 38 (thirty eight) administrative…

We describe an efficient system-level simulator that, starting from the architecture of a well-specified transmissive medium (a channel modelled as single-ended or coupled differential microstrips plus cables) and including the system-level characteristics of transmitter and receiver (voltage swing, impedance, etc.), computes the eye diagram and the bit-error rate that is obtained in high-speed serial interfaces.…

Blurred small objects produced by cropping, warping, or intrinsically so, are challenging to detect and classify. Therefore, much recent research is focused on feature extraction built on Faster R-CNN and follow-up systems. In particular, RPN, SPP, FPN, SSD, and DSSD are the layered feature extraction methods for multiple object detections and small objects. However, super-resolution…

The internet of things has resulted in the design and development of many electronic sensors that need to be integrated with various technologies. Engineering academics need ongoing training relating to this integration as they need to subsequently teach their students. This relates to continuous professional development. The purpose of this article is to illustrate how…

This is era of new technology; most of information is collected from internet, web sites. Some people uses data from research papers, thesis, and website as it is and publish as their own research without giving proper acknowledgement. This term is known as plagiarism. There are two types of plagiarism detection methods, i) Extrinsic plagiarism…

In recent years, research has been conducted focused on the use of technologies in the classroom, but one of the main problems is to demonstrate that the use of this technology favors learning compared to traditional methods. One of these technologies is augmented reality that allows seeing virtual objects superimposed in the real world, but…

In this work, an integrated metamaterial filter design in close proximity with monopole antenna is proposed for vehicular communication applications. A cylindrical screen formed by an array of metamaterial cells is designed to be reflective at 5.9 GHz in order to enhance antenna performance in intelligent vehicle transport systems. The unit cell proposed design based…

This paper represents analysis of principles providing maximally reliable delay estimation of signal synchronization devices in telecommunication. Clock synchronization schemes on the base of stochastic models, graph-analytic interpretation, analytical functional description and their parameters selection in case of real complex hindrance are analyzed. Dependences between dispersion of maximally reliable estimation of synchronization devices and signal…

The high flow of vessel traffic affects the difficulty of monitoring vessel in the middle of the sea because of limited human visibility, occurrence of vessel accidents at the sea and other illegal activities that illustrate abnormal vessel behavior such as oil bunkering, piracy, illegal fishing and other crimes that will continue and will certainly…

Currently, there is a growing interest for applying gamification in e-learning due to innovations in technologies and pedagogies. However, motivation and engagement related problems can arise when the gamification elements are not personalized to match the individual’s needs. Therefore, this research proposes a Hybrid Learning Model that combines both Gamification and Personality Traits to increase…

The digital factory is a concept signing a new era for industry, the so-called Industry 4.0, in which ordinary production systems like manufacturing plants, machineries and utilities are being equipped with diagnostic and sensitive instrumentation to be connected to digital shared networks. This data-sharing, trough the big data management techniques, is a fully integrated base…

Demak is located on the north coast of Java, precisely in Central Java Province, Indonesia which has many problems related to erosion and shoreline degradation. This study attempts to analyze, identify, and select the materials to build eco-friendly permeable breakwater in Demak. The research was conducted during 2014, consist of several activities, i.e. identified the…

The article is devoted to the formalization and development of the theory of sequential experimental design for optimal identification of dynamic objects. The algorithmic and technical support for a system of sequential D-optimal identification for a wide class of dynamic objects in real time is considered. This system is universal and can be used for…

This research to applying the application of e-smart farming to control the sprinkler irrigation on agricultural land. This study aims to be able to help farmers to solve the watering problems that are manually carried out into watering done automatically and controlled, besides that this research also obtained data about the level of moisture content…

Concept of university higher education quality is linked to the relevance of an educational project that promotes institutional transformation to improve the comprehensive training of new professionals. In this context, the research objective is to determine the graduates satisfaction level, trained with curricula 1979, 1985 and 1995 who have more than 20 years of graduation…

Breast cancer has an important incidence in women mortality worldwide. Currently, mam- mography is considered the gold standard for breast abnormalities screening examinations, since it aids in the early detection and diagnosis of the illness. However, both identification of mass lesions and its malignancy classification is a challenging problem for artificial intelligence. In this work,…

Medical images are transmitted via the Internet or the hospital intranet which include many important information about the patient’s personal information. Medical image encryption is a technology that can effectively protect the information contained in these medical images. In this paper, we give a secure and trusty Combined Cellular Automata (CoCA) based medical image encryption…

Circular data are common in biological studies which are involved angle and direction measurements. An outlier in circular biological data mostly related to the abnormality of the data set. The existence of outliers may affect the final outcome of a data analysis. Thus, an outliers’ identification method is essential in circular biological data to determine…