Search Results

VANET as a subclass of MANET is composed of a set of vehicles equipped with wireless transceivers, to build dynamic networks without the need of any pre-existing infrastructure. Over the last few decades, the area of routing protocols in VANETs has been extensively studied. Nevertheless, this area remains even more challenging due to some features…

The XBRL taxonomy has been proven to be able to restore various forms of redundancies and ambiguities in making financial reports from financial service institutions. However, the nature of XBRL which is oriented towards documents and based on XML makes the XBRL taxonomy difficult to use because the information cannot be directly read by ordinary…

Synthetic aperture radar (SAR) is an imaging device mounted on a moving platform. Its ability to identify a weak target from a nearby strong one depends upon the peak side lobe ratio (PSLR). This paper is intended to ameliorate such important ratio through the use of windowing of the transmitted pulse and studying the noise…

Stability or balance is an integral component to perform daily activities without incurring injury or to be dependent on others. Sportsmen tend to have better balance than non-sports people but less is known about the single-leg balance ability. Furthermore, few studies analyzed the dynamic phase of single-leg stance that may contribute to better overall balance.…

In this paper, we present a broadband frequency tunable antenna embedding varactor diodes. The reference antenna structure is a square antenna of patch dimensions [39,2 × 39,2] mm², operating at a single resonance frequency 2.45GHz. The recommended procedure to achieve the frequency shifting is to etch rectangular slots on the patch and to embed two…

It is widely known that students’ exposure to poor postures due to inappropriate classroom furniture design may contribute to the increase of the prevalence of musculoskeletal disorders symptoms that if not identified on time could lead to severe health issues. In this context, due to the unavailability of scientific studies related to this topic in…

In advanced technologies nodes, starting from 28 nm to 7 nm and below, the power consumed of integrated circuits (ICs) becomes a big concern. Consequently, actual electronic design automation (EDA) tools are facing many challenges to have low power, reduced area and keep having required performance. To reach required success criteria, and because each picosecond…

Electrical energy shortage and expensive basic electricity costs are one of the problems that are occurred in Karimunjawa Island, Indonesia. The purpose of this research is to identify the potential of ocean currents energy as one of the alternatives to reduce the problem related to energy needs and to predict the electrical energy that can…

Digitization forces industry players to adapt to transforming market situations and buyer behavior. Technological advances, buyer power, and sharpened competitive intensity imply that businesses are confronted with the menace of commoditization. For companies to perform successfully in the market, outdated business models ought to be rethought and new business models should be created. Unique selling…

Since environmental requirements penetrate engineering processes to keep global warming and to reduce pollutant emissions, the system operation should be designed based on environmentally approach friendly. Operationally, the system processes are supported by energy suppliers to meet continuously energy transaction while clean and green energies are also targeted to keep the environmental conditions. In other…

In an enterprise Wifi network, indoor and dense, co-channel interference is a major issue. Wifi controllers help tackle this problem thanks to radio resource management (RRM). RRM is a fundamental building block of any controller functional architecture. One aim of RRM is to process the radio plan such as to maximize the overall network transmit…

The IEEE802.11n based Wireless Local Area Networks (WLANs) have been extensively deployed due to the flexible coverage, the easy installation, and the lower cost. To reduce the energy consumption while increasing the performance, the elastic WLAN system has been studied, such that it can dynamically change the network configuration according to traffic demands. As well,…

This paper examines application of linear general model predictive control (LGMPC). The stability of the LGMPC is proven by means of a demonstration of a theorem stating a sufficient and constructive condition. Lower bounds conditions are found for one of these matrices and then a system with saturation is taken into consideration. The conditions can…

Dyslexia has a lack of ability which causes other disturbances to social-emotional development. Based on an interview with the Chair of the Indonesian Dyslexia Association, increasing self-awareness is one form of dyslexia therapy to reduce that problem. Therefore there is a need for increasing self-awareness to solve that problem, whereas such technology the closest has…

This paper considers active disturbance rejection control (ADRC) as a new control approach for pH neutralization process. The pH process is challenging to control due to its sensitivity to disturbance, nonlinear dynamics, and time-varying characteristics. Special attention is paid to the impact of disturbances typically exists in the chemical process. First, the pH neutralization process…

3D-printing technologies have greatly influenced the field of fabrication of medical devices. In particular, Fused Deposition Modeling 3D printing has emerged as one the most popular and most promising technologies for fabricating upper-limb prostheses. Over the last years, a variety of types and designs of 3D-printed hand prostheses have been created and are commercially available.…

This paper proposes Halbach array PM linear generators for direct conversion of ocean or sea wave energy. This generator is proposed to be directly coupled to a reciprocating wave energy system which may be a valued alternative for pneumatic and hydraulic systems. In this research, air-cored permanent magnet PM linear generator has been optimally designed…

Although social media is used by an ever-increasing number of businesses, its benefits have not yet been fully exploited. Social media analytics tools can prove helpful in this regard, since they comprise a unique information source for business intelligence. As the social media environment rapidly evolves, various social media analytics tools are emerging. This research…

This study involved three departments of teachers and students. The concept of the flow-motivated exercise implemented with a set of flow nozzles. A computer-controlled airflow with specific music introduced, and the motion responses from the participants were analyzed during the initial test and field study. During the initial examination, we adjusted the magnitude and distance…

This paper describes an architectural approach to the development of dynamic service-oriented systems for e-Health using the service orchestration mechanism and semantic technologies. The main idea is the dynamic synthesis of the complex functionality required by user or by software agent. This idea should help to build and easily extend the applied loose-coupled systems without…

This study introduces the implementation of fuzzy set theory to solve machine layout design issues, in order to handle vague information, using a genetic algorithm with tournament selection as the selection operator. The material handling inputs, including frequency and volume of materials that move between machines, were the parameters regarded as fuzzy numbers. The experimental…

This paper analyzes the process of reactive power compensation using thyristors switched capacitors TSC topology based on multiterminal switch during the starting of induction motor. The paper explains the control principle of this TSC topology which depends on the multiterminal switch. To actively track the required reactive power for the dynamic load and to perfectly…

The paper deals with hardware emulation of bio-inspired devices and nonlinear dynamic processes of complex nature by means of mixed-mode analog-digital emulators. The discretized state model of the emulated system serves for real-time calculation of dependent quantities. In contrast to input-output emulation known in control systems, the proposed approach emulates the ports of an electrical…

This study examined the performance of two proposed permutation methods for Chow test analysis and the Milek permutation method for testing structural break in linear models. The proposed permutation methods are: (1) permute object of dependent variable and (2) permute object of the predicted dependent variable. Simulation from gamma distribution and standard normal distribution were…

This article presents a bridge crane nonlinear dynamic model in 2-dimensional space, and then given a novel adaptive fuzzy-sliding mode controller based on combining sliding mode control with fuzzy logic and Lyapunov function. Firstly, the article proposes an intermediate variable to link signal between two slide surfaces, related to trolley movement and payload swing. Then…