Search Results

It was analyzed the reference information on Cybersecurity architectures, models, standards, evaluations, mechanisms, and procedures applied to IoT domains, and public and private health area. The problem is the lack of proposals for IoT Cybersecurity in public and private hospitals to minimize random failures, ensure the privacy of personal data of patients, avoid the paralysis…

Oscillator phase noise (PN) has a strong impact on the spectral purity of the RF signal in wireless systems and is, therefore, a main challenge when designing a local oscillator. In this paper, we propose a new approach for designing a low PN oscillator based on the Time-Invariant Linear Model of phase noise. It leads…

The field of humanitarian logistics has in recent times gained an increasing attention from both academics and practitioners communities alike. Although various research groups have addressed theoretical and technical developments in humanitarian logistics using conventional research tools, applied research appears to be often dependent on practitioners’ inputs. This paper is an attempt to fill the…

Many advances in computer systems and IT infrastructures increases the risks associated with the use of these technologies. Specifically, intrusion into computer systems by unauthorized users is a growing problem and it is very challenging to detect. Intrusion detection technologies are therefore becoming extremely important to improve the overall security of computer systems. In the…

The paper proposes the design and simulation of a 6 Degree of Freedom (DOF) robotic arm, tailored for the coconut crop harvesting, assistive robots like wheelchairs and Home robots, Search and rescue robots for disastrous environments, Collaborative robots for research use. A kinematics-based solution has been developed for the robotic arm which makes it easier…

Visible light communication (VLC) that simultaneously gives illumination and information transmission abilities, is recognized as a hopeful competitor for prospective wireless net- works. Furthermore, a channel adaptive collaborative constellation (CASCC) with the capacity of adapting according to the channel condition to enhance the bit error rate (BER) while concurrently improving the versatility of the receiver…

With the current amount of data nowadays, the need for processing power has vastly grown. By relying on CPU processing power, current processing power is depending on the frequency and parallelism of the current CPU device. This means this method will lead to increased power consumption. Current research has shown that by utilize the power…

The increase in the number of elderly people requires multiple efforts to maintain their well-being and health. A wide variety of products and services have been created to enable seniors to live at home for as long as possible. The market success of these solutions depends on acceptance by the different stakeholders. Older people are…

Over time, several routing protocols have been suggested for use in Mobile Ad Hoc Networks (MANETs). Because of availability of so many MANETs routing protocols, network engineers and administrators face difficulties in identifying an appropriate routing protocol for a particular scenario. This challenge results from the unavailability of adequate technical analytic studies designed to examine…

This paper provides an insight about the significance of the enterprise technical architecture (ETA) in enabling and supporting the implementation of the South African National Health Insurance (NHI). Design: Existing documentations from both academic and government domains were gathered, and analyzed using the hermeneutics technique, from the perspective of interpretivist approach. Based on the analysis,…

This paper uses the RC-triggered MOSFET-based electrostatic discharge (ESD) power clamp to conduct ESD from ESD events and not affect the ultra-low power sensor system. Then using the stacked device include stacked MOSFET or stacked BJT to reduce the leakage current which increases with temperature. Moreover, we compare gate-driven method and two-level–driven with both gate-driven…

In the Moroccan seismic code, infill walls are considered as secondary elements and their lateral strength and stiffness are neglected in the design when considering horizontal seismic loads. In this article we propose to investigate the effect of infill on the seismic performance of the buildings. A 6-stories reinforced concrete frame building is investigated. The…

This research work mainly presents the design and development of a small-scaled wheeled robot, which can be controlled using multiple controlling interfaces using some new technological trends. Raspberry Pi 3 as the main controller, Python as the programming language integrated with the Robot Operating System (ROS) and Virtual Network Computing (VNC) for screen sharing are…

In the software engineering research, several works focus on advantages of multi-modeling, which facilitate modeling a system by separating of concerns. The Model Driven Engineering approach relies on model to design software artefacts during the software development lifecycle. Handling such models involves describing some model management operators like ‘ composition ‘. That is an operation…

The need for air conditioning in rural areas where there is no source of electricity, leads to look for alternative solutions. Usage of Solar thermal system drive vapor jet refrigeration cycle (VJRC) instead of the traditional air conditioning systems, contributes in the reduction of the Global Worming and Ozone Depletion. The main objective of this…

Time-series is a sequence of observations that are taken sequentially over time. Modelling a system that generates a future value from past observations is considered as time-series forecasting system. Recurrent neural network is a machine learning method that is widely used in the prediction of future values. Due to variant improvements on recurrent neural networks,…

The internet of things has resulted in the design and development of many electronic sensors that need to be integrated with various technologies. Engineering academics need ongoing training relating to this integration as they need to subsequently teach their students. This relates to continuous professional development. The purpose of this article is to illustrate how…

In recent years, research has been conducted focused on the use of technologies in the classroom, but one of the main problems is to demonstrate that the use of this technology favors learning compared to traditional methods. One of these technologies is augmented reality that allows seeing virtual objects superimposed in the real world, but…

In this work, an integrated metamaterial filter design in close proximity with monopole antenna is proposed for vehicular communication applications. A cylindrical screen formed by an array of metamaterial cells is designed to be reflective at 5.9 GHz in order to enhance antenna performance in intelligent vehicle transport systems. The unit cell proposed design based…

In this article, a new form of UWB (ultra-wide-band) antenna operating to the desired specifications, obtained from a base antenna to which some modifications are made. The proximity of the antennas causes a mutual coupling phenomenon thus generating an apparent modification of their characteristics. It is therefore crucial to have the minimum level of insulation…

This work describes a case study carried out in an automotive company. The main objective was to increase the productivity of the last workstation of an assembly line by implementing an AGV System to transport finished goods to the warehouse. A comprehensive analysis of Value Added and Non-Value Added activities were performed to understand the…

Demak is located on the north coast of Java, precisely in Central Java Province, Indonesia which has many problems related to erosion and shoreline degradation. This study attempts to analyze, identify, and select the materials to build eco-friendly permeable breakwater in Demak. The research was conducted during 2014, consist of several activities, i.e. identified the…

The article is devoted to the formalization and development of the theory of sequential experimental design for optimal identification of dynamic objects. The algorithmic and technical support for a system of sequential D-optimal identification for a wide class of dynamic objects in real time is considered. This system is universal and can be used for…

This paper presents hybrid solar thermal/electricity automated oven. The work compares sliding mode control (SMC) to traditional PID control of the oven system using MATLAB/Simulink 2014b model. SMC control method shows faster rise and settling time. The control technique has been designed to automate change of temperature level of the oven by accepting multiple reference…

In many countries and regions in the world, earthquakes are one of the most common natural disasters, which affect both human life and property. To avoid negative effects of earthquake, the nonlinear response of structures under dynamic loading should be accurately modeled to investigate their actual behavior under earthquake loading to ensure safe and sound…