Search Results

In vital energy applications especially the agricultural environments, the service of adaptive power utilization plays an essential role in facilitating the usage of Internet of Things systems. Such environments are distinguished by the large range of lands where most of the region lacks the commercial power lines. Reaching some high or deep sensing points is…

The Blockchain technologies enable decentralized networking consisting of large number of nodes. To determine the shared states and failures of all nodes in a fully distributed peer-to-peer system, the appropriate consensus algorithm needs to be selected for each Internet of Things system. In this paper, a novel hierarchical voting-based byzantine fault tolerance (HBFT) consensus algorithm…

For many years, the most popular technique for Internet video streaming is hypertext transfer protocol-based adaptive streaming, known as HAS (HTTP Adaptive Streaming). However, a seamless viewing experience can not be just simply guaranteed by HAS only. In the management network, the adaptation of HAS copes with a huge challenge since client- driven schemes lead…

Fault-tolerant applications are created by replicating the software or hardware component in a distributed system. Communications are normally carried out over an Ethernet network to interact with the distributed/replicated system, ensuring atomic multicast properties. However, there are situations in which it is not possible to guarantee that the replicas process the same data set in…

The fight against poverty in the Peruvian Andes is a complex task in which various professionals, such as engineers, economists, anthropologists, among others, participate. The uncertainty of the decisions taken today, no matter how appropriate they may seem, such as million-dollar investments in irrigation infrastructure, can result in over-production and, therefore, in economic recessions. For…

Power converters in automotive industries are needed to source electronic devices. DC-DC Buck converter allows to drive loads ensuring their safety operation taking the car battery voltage as an input to generate a sub-voltage or current. By means of a control loop, the system makes sure that the output variable has the desired value in…

The family can be referred to as a basic nucleus of society, where it must be fully formed as a group and guarantee the safety and development of its members. Increasing social inequality affects society and also the families that comprise it. It is a study with a quantitative approach, with a non-experimental, descriptive and…

This study primarily aims to identify the factors that helped emo kids in 2010 move through the emo-identity discrimination and be able to obtain a certain level of achievement. Facebook is the social network that allows users to track friends’ posts back over 10 years. Content analysis was conducted by using two coders to rate…

The study aims to demonstrate how the use of the design process can align a brand’s strategy with the interests of its target audience through a digital product based on a case study. Currently, Lexus internal studies show that there is a possibility to meet the needs of new audiences, beyond the traditional ones (men,…

Suppose we want to classify a query item Q with a classification model that consists of a large set of predefined classes L and suppose we have a knowledge that indicates to us that the target class of Q belongs to a small subset from L. Naturally, this filtering will improve the accuracy of any…

Since its appearance, COVID-19 has severely impacted the healthcare sector all over the world. The healthcare organizations should be agile in order to cope with this new health crisis. Indeed, organization agility was highly recommended as an essential basis for flexibility, innovation, speed, as well competitiveness. Different research provided different conceptual models suitable to evaluate…

With the aim of preventing hydro-geological risks and overcoming the problems of current rain gauges, this paper proposes a low-complexity and cost-effective video rain gauge. In particular, in this paper the authors propose a new approach to rainfall classification based on image processing and video matching process employing convolutional neural networks (CNN). The system consists…

SIARAN is application which is created by Government of South Tangerang City, Indonesia. The application is e-government services social media based. It is designed for citizens to be able to report problems that occur around South Tangerang City. The research was conducted to find out the factors that affect the intention of SIARAN’s users. The…

The paper presents sharing several of experiences and practices on smart robotic application for overhead transmission line maintenance and inspection. First, the pilot-line pulling robot is an invention used to pull a pilot line which is an important step for additional high voltage conductor installation. The puller robot can traverse the overhead ground wire, OHGW,…

With the current amount of data nowadays, the need for processing power has vastly grown. By relying on CPU processing power, current processing power is depending on the frequency and parallelism of the current CPU device. This means this method will lead to increased power consumption. Current research has shown that by utilize the power…

Object Instance Recognition aims to classify objects specifically and usually use a single reference image. It is possible to be used in many applications such as visual search, information retrieval and augmented reality. However, various things affect the appearance of the objects, which makes the recognition process harder, especially if a single reference image is…

In this paper, the vulnerabilities and the security attacks against vehicular networks, SDN architecture and some security solutions for SDVN are studied. Secondly, a complete and improved version of the secure HSDN-GRA routing protocol based on a distributed trust model is proposed where public keys of the vehicles are managed in a distributed way. Besides,…

This article presents the development of an automatism by means of a Programmable Logic Controller (PLC), for the Fire System of an Electric Substation; For this, the areas belonging to the electrical substation are initially described, where the automatism is developed, these being three; Patio area (Transformer location), Distribution board area and Control room. Then…

In Latin America, there is a need for better security systems in different national or sectional votes, which is why this study was carried out, to show a proposal for a security model that helps to obtain better results and to this purpose has been selected information on the database for different Latin American countries,…

To reduce its high last mile logistics cost, a company may explore different options such as a horizontal collaboration with another company that has a similar logistics requirement. Traditionally, the collaboration can be conducted through an outsource contract mechanism where the company may need to guarantee a certain number of logistics demands or usage for…

In this paper, an optimal discrete-time sliding mode control is proposed for single-input single-output nonlinear systems with input constraints. The sliding surface is designed on the basis of particle swarm optimization algorithm in order to optimize the system response characteristics while ensuring the follow-up of reference model in presence of constraints. Moreover, the controller is…

The 5G is the fifth generation of mobile broadband, cellular technologies, and networks that promises a major change in mobility by evolving connected business realities. In such an emerging environment, reliable Service Level Agreements (SLA) and anticipation of breaches of Service Level Objectives (SLO) become compulsory. Thus, guaranteeing the required service quality, while also ensuring…

Combinatorial optimization problems are often NP-hard and too complex to be solved within a reasonable time frame by exact methods. Heuristic methods which do not offer a convergence guarantee could obtain some satisfactory resolution for combinatorial optimization problems. However, it is not only very time consuming for Central Processing Units (CPU) but also very difficult…

Cloud Computing is considered nowadays an attractive solution to serve the Big Data storage, processing, and analytics needs. Given the high complexity of Big Data workflows and their contingent requirements, a single cloud provider might not be able alone to satisfy these needs. A multitude of cloud providers that offer myriad of cloud services and…

The research reported in this paper proposes an Advanced Process Control system, denoted “i.Process | Steel – RHF”, oriented to energy efficiency improvement in a pusher type billets reheating furnace located in an Italian steel plant. A tailored control method based on a two-layer Model Predictive Control strategy has been created that involves cooperating modules.…