Results (85)
Search Parameters:
Keyword: MATLABArtificial Neural Network Approach using Mobile Agent for Localization in Wireless Sensor Networks
Wireless sensor networks (WSNs) are having large demands in enormous applications for the decade. The main issue in WSNs is estimating the exact location of unknown nodes. All applications are dependent on the location information of unknown nodes in WSNs. Location information of mobile anchor node is used to estimate the location of unknown nodes.…
Read MoreSimulated IoT Based Sustainable Power System for Smart Agriculture Environments
In vital energy applications especially the agricultural environments, the service of adaptive power utilization plays an essential role in facilitating the usage of Internet of Things systems. Such environments are distinguished by the large range of lands where most of the region lacks the commercial power lines. Reaching some high or deep sensing points is…
Read MoreOpen Energy Distribution System-Based on Photo-voltaic with Interconnected- Modified DC-Nanogrids
This manuscript exhibits a perfect design for a flexible number of modified DC nanogrids within an open energy distribution network (OEDN) that interconnected via a DC bus. Each modified nanogrid implies a single-input multi-output switched boost inverter (SIMO-SBI). The DC-output for each inverter is robustly controlled to keep the DC-bus interconnected voltage constant. The proposed…
Read MoreActive Disturbance Rejection Control Design for a Haptic Machine Interface Platform
This paper proposes an active disturbance rejection control (ADRC) design for a haptic display platform structure. The motivation for the following scheme originates from the shortcomings faced by classical proportional integral derivative (PID) controllers in control theory. The ADRC is an unconventional model-independent approach, acknowledged as an effective controller in the existence of total plant…
Read MoreMethod of Technological Forecasting of Market Behaviour of R&D Products
The current concept of open innovation corresponds to the R&D products transfer model – “role changes”. One of the fundamental provisions of the model is that R&D products are considered for commercialization not only at the final stage of technological readiness, but at any of them. In today’s changing market environment, special attention is paid…
Read MoreEliminating Target Anopheles Proteins to Non-Target Organisms based on Posterior Probability Algorithm
Capturing similarity in gene sequences of a target organism to detect significant regions of comparison will most likely occur because genes share a related descendant. Local sequence alignment for the targeted organisms can help preserve associations among sequences of related organisms. Such homologous genes possess identical sequences with common ancestral genes. The genes may be…
Read MoreParticle Swarm Optimization, Genetic Algorithm and Grey Wolf Optimizer Algorithms Performance Comparative for a DC-DC Boost Converter PID Controller
Power converters are electronic devices widely applied in industry, and in recent years, for renewable energy electronic systems, they can regulate voltage levels and actuate as interfaces, however, to do so, is needed a controller. Proportional-Integral-Derivative (PID) are applied to power converters comparing output voltage versus a reference voltage to reduce and anticipate error. Using…
Read MoreSimulation of Pulse Width Modulation DC-DC Converters Through Symbolic Analysis Techniques
The problem of Pulse Width Modulated (PWM) DC-DC converter simulation is faced in this paper. It is shown how the analysis of this kind of circuits, nonlinear and switching for their nature, can be easily and quickly executed by using symbolic analysis techniques. The paper also presents the program SapWinPE, which performs an automatic symbolic…
Read MoreCurrent Control of Battery-Supercapacitors System for Electric Vehicles based on Rule-Base Linear Quadratic Regulator
This research aims to investigate the energy and power management of a battery-supercapacitors Hybrid Energy Storage System (HESS) for Electric vehicles (EVs). A bidirectional DC-DC converter, a battery and a set of supercapacitors were employed to construct the parallel semi-active architecture of HESS. Two strategies of Rule-Base Linear Quadratic Regulators (R-B LQRs) were proposed to…
Read MoreEfficient and Scalable Ant Colony Optimization based WSN Routing Protocol for IoT
IoT integrates and connects intelligent devices or objects with varied architectures and resources. The number of IoT devices is growing exponentially. Due to the massive wave of IoT objects, their diversity and heterogeneity among their architectures, the existing communication protocols for wireless networks become ineffective in the context of IoT. Wireless Sensor Network (WSN) has…
Read MoreOn Design of IoT-based Power Quality Oriented Grids for Industrial Sector
Manufacturing industry is facing several challenges in power quality and energy consumptions that play a significant role in the cost of goods sold in addition to the operational efficiency of manufacturing plants. The current techniques are not enough to manage the manufacturing processes from power perspectives as it is focusing only on the monitoring of…
Read MoreComparative Study Between Three Methods for Optimizing the Power Produced from Photovoltaic Generator
The technics of maximum power point tracking is widely used in solar photovoltaic energy and electric power system applications. Traditionally, these technics are based on conventional methods like perturb and observe and incremental conductance. In this work, three methods based on particle swarms optimization, incremental conductance and adaptive neuro fuzzy inference system are presented. A…
Read MorePV Integrated Recursive Least Mean Square Estimation Based Shunt Active Power Filter
This paper proposes a photovoltaic (PV) integrated shunt active power filter (SAPF) for reactive power compensation, uneven loading and compensation of harmonic current. The control of SAPF is implemented by using adaptive based current estimation algorithm to maintain power factor near to unity and source current sinusoidal at source side. The weights are calculated online…
Read MoreProjection of Wireless Multipath Clusters Using Multi-Dimensional Visualization Techniques
Advances in channel modeling allow wireless communication designers to accurately model and understand the channel’s phenomena within different propagation scenarios. A precise channel model results in the wireless system’s optimized performance while considering trade-offs due to the effects of the channel. The geometric-based stochastic channel model considers different interacting objects affecting the parameters using the…
Read MoreNPC five level inverter using SVPWM for Grid-Connected Hybrid Wind-Photovoltaic Generation System
This paper covers a new topology, a synchronous wind turbine generator, and a solar photovoltaic generator. The Permanent Magnet Synchronous Generator is linked to the grid by back-to-back voltage source converters (BtB VSC), consisting of a two-stage rectifier and a five-stage Neutral Point Clamped inverter, operated by the Space Vector Pulse Width Modulation technique. A…
Read MoreOptimal Irrigation Strategy using Economic Model Predictive Control
In many countries, irrigation water is one of the major contributors to water scarcity. In the present study, a novel optimized irrigation system which minimizes water consumption in irrigation is presented. The system is based on a predictive control algorithm, which foresees the water need of the crop, and regulates the time and amount of…
Read MoreVariation Between DDC and SCAMSMA for Clustering of Wireless MultipathWaves in Indoor and Semi-Urban Channel Scenarios
The performance of Simultaneous Clustering and Model Selection Matrix Affinity (SCAMSMA) and Deep Divergence-Based Clustering (DDC) in clustering wireless mul- tipaths generated by COST 2100 channel model (C2CM) is compared. Enhancing the accuracy of clustering multipaths is an open area of research which the clustering ap- proaches try to improve. Jaccard index is used as…
Read MoreAn Adaptive Nonlinear Sensorless Controller of Doubly Fed Induction Generator Driven By Wind Turbine
In this study, an adaptive nonlinear sensorless controller for doubly fed induction generator (DFIG) driven by a wind turbine is proposed. The aim is to maximize the extracted power by tracking the wind turbine optimal torque-speed characteristic without the need for rotor speed measurement. This controller ensures a satisfactory tracking of both stator flux and…
Read MoreFault-Tolerant Control of Permanent Magnet Synchronous Motor Drive under Open-Phase Fault
This paper presents an integrated solution for a fault-tolerant three-phase permanent magnet synchronous motor (PMSM) field-oriented control drive subjected to an open-phase fault (OPF) integrated with effective fault-tolerant detection methodology. The fault detection methodology is based on model predictive current control (MPCC), which is easy to apply, detect OPF in a range of microseconds, and…
Read MoreA Fuzzy Controller Based SAPF for Power Quality Enhancement of Distribution System Integrated with Wind Energy Source
Wind energy is emerged rapidly as the most important and viable sustainable power source due to the mature technology and wide availability. The integration of wind energy sources and utilization of nonlinear loads having different characteristics results in several challenges in a distribution system. One of which is power quality issue .Hence, in this work,…
Read MoreImprovised E-Rickshaws for Indian Roads by Effective Battery-Ultracapacitor Hybridization
The revolution in the electrification of conventional vehicles due to increased petroleum prices and environmental concerns has had its impact on three-wheeler vehicles as well. Motorized three-wheeled vehicles, known as Auto-rickshaws, are a standard mode of trans- portation in India. Existing battery operated electric rickshaws (known as E-rickshaws) available in major cities of India faces…
Read MoreLoad Evaluation with Fast Decoupled-Newton Raphson Algorithms: Evidence from Port Harcourt Electricity
The undulated power supply has dropped to its worst reliability index in most parts of the city despite the installations of distribution transformers to improve the power. In this work, examination of Port Harcourt Town Zone 4 (Z4), Rivers State power distribution system forcing on its operation, planning for future expansion of the system, and…
Read MoreDesign of High Output Impedance, Large Voltage Compliance Output Stage of Implantable Hypoglossal Nerve Stimulator (HGNS) for OSA Treatment
Obstructive Sleep Apnea (OSA) is a potentially common sleep disorder manifested in upper airways’ collapse, either partially or completely. If diagnosed late and untreated, it may result in serious complications. The standard golden method, useful for treating OSA, remains the full night Continuous Positive Airway Pressure (CPAP). Yet, due to the ensuing discomfort it incurs…
Read MoreThermal Performance Analysis of Parabolic Trough Solar Collector System in Climatic Conditions of Errachidia City, Morocco
The water heating with parabolic trough solar collectors (PTC) is a very widespread and at the same time quite promising solar technology. However, PTC presents several problems in terms of the profitability of water heating. For this reason, our study of water heating with PTC collectors consists of two main parts. In the first part,…
Read MoreInterpolatory Projection Techniques for H2 Optimal Structure-Preserving Model Order Reduction of Second-Order Systems
This paper focuses on exploring efficient ways to find H2 optimal Structure-Preserving Model Order Reduction (SPMOR) of the second-order systems via interpolatory projection-based method Iterative Rational Krylov Algorithm (IRKA). To get the reduced models of the second- order systems, the classical IRKA deals with the equivalent first-order converted forms and estimates the first-order reduced models.…
Read More
