Search Results

A modern process plant is controlled, operated and safeguarded by the sophisticated distributed control system or a programmable logic controller and an emergency shutdown system. This process plant’s operation could be seriously affected by lightning, electrical switching, and power outrage. Lightning propagation can travel kilometers away, which has the risk of disturbing the control system’s…

Many recent studies on autonomous driving have focused on model-based control. A number of studies has addressed that simple models such as the Kinematic Bicycle Model are easier to design controls for autonomous driving systems. However, such a simple vehicle model has a weakness in that it is subject to modeling errors. This is because…

Fault-tolerant applications are created by replicating the software or hardware component in a distributed system. Communications are normally carried out over an Ethernet network to interact with the distributed/replicated system, ensuring atomic multicast properties. However, there are situations in which it is not possible to guarantee that the replicas process the same data set in…

This paper is carrying out a practical identification of a DC servomotor from input and output data. The system’s step response was obtained from an acquisition card that we have developed using a microcontroller. The data is collected and downloaded to the PC Thought RS232 Protocol to process the identification process using polynomial models (ARX,…

Comparing to other types of vehicle accidents, fatality rate of tipped rollover accidents shows significant number. Thus, tripped rollover prevention systems are important in order to keep driver safe. In other hands, different rollover indices are defined to handle the risk. The variable unknown parameters of each index, for instance, current load of the vehicle…

The adoption of Engine-in-the-loop technology shows real behaviour. This study presents a test runs simulation platform with real engine data. In addition, a test bench model is a demand approach that offers a significant potential to provide an excellent reproducibility of test runs. The platform includes the data integration to upgrade tests run and a…

A precise modelling plant system is substantial to improve the design of the DC motor controller, where a low accurate model may cause an unacceptable controller system. This study presents a hardware-in-the-loop (HIL) system for design a high speed motor data acquisition system (HSMDAQS) and injected collected data (ICD) Simulink model to estimate accurately the…

This paper deals with a multi closed-loop adaptive neuro-fuzzy inference system (ANFIS) design for the under-actuated quadrotor systems. First, the training data set for the fuzzy inference system is obtained using a proportional integral derivative controller. Then, an initial ANFIS controller is designed, where the integral control action is preserved in the multi-closed-cloop ANFIS for…

This paper focuses on exploring efficient ways to find H2 optimal Structure-Preserving Model Order Reduction (SPMOR) of the second-order systems via interpolatory projection-based method Iterative Rational Krylov Algorithm (IRKA). To get the reduced models of the second- order systems, the classical IRKA deals with the equivalent first-order converted forms and estimates the first-order reduced models.…

This research the authors design the intelligent control for 3-DOFs lower limb rehabilitation robot base on the complex dynamics equation. The Force Feed-Forward Method (FFM) is promote to control the of 3-DOFs lower limb rehabilitation robot including dynamics characteristics. The robot can sense the force of the therapist which exerted on the robot and patient’s…

In this paper, the problems of actuator and sensor fault estimation (FE) and fault-tolerant control (FTC) for uncertain nonlinear systems represented by Takagi-Sugeno (T-S) fuzzy models are investigated. First, a robust fuzzy adaptive sliding mode observer (SMO) is designed to simultaneously estimate system states and both actuator and sensor faults. Then, using the obtained on-line…

With a model predictive control approach including boundary analysis and uncertain prediction of activities of different road participants, this paper proposes solutions that support motion control by steering control and appropriate acceleration to create safe motion trajectories for an autonomous vehicle. The motion control support element is determined by the principle of minimal intervention and…

Degradation measurements are often treated and analyzed for improvement the reliability of system. Our objective in this paper is to study a class of non linear systems, whose dynamics and observations are non linear functions of the state. Obviously, we develop an Extended Kalman Filtering (EKF) algorithm for detecting the additive failures in a two…

With a model predictive control approach and to set the motion trajectory for an autonomous vehicle in situations where emergency braking cannot be performed, in this paper, we propose a solution to apply the law on road traffic into a set of constraints and thereby build an objective function to create motion trajectory for autonomous…

Nowadays, process automation and smart systems have gained increasing importance in a wide variety of sectors, and robotics have a fundamental role in it. Therefore, it has attracted greater research interests; among them, Underactuated Mechanical Systems (UMS) have been the subject of many studies, due to their application capabilities in different disciplines. Nevertheless, control of…

This paper investigates the trajectory tracking control (TTC) problem of a networked control system (NCS) against a replay-attack. The impact of data packet dropout and communication delay on the wireless network are taken into account. A new mathematical representation of the NCS under network issues (packet dropout, delay, and replay-attack) is proposed, the resulting closed-loop…

This article deals with the issue of parking houses, storage mechanisms and how to control them. A laboratory model of a multi-storey underground automatic parking house was designed and created for this purpose, which is used to test a new innovative way of storing cars and specialized approaches to driving actuators. The model is based…

The poultry house is the area where the chickens are maintained for the main purpose to improve the productivity and the environmental conditions for the broilers. The growth of chickens inside the poultry house can be affected by several criterions such as relative humidity and temperature. In this paper, we propose to design and implement…

This article develops the design and implementation of an industrial network for the control and supervision of the process of dispatching acetic acid, which aims to reduce the presence of this chemical in the environment, since the process is activated manually by the operators; what generates a lack of precision in several stages of the…

This article presents the development of an automatism by means of a Programmable Logic Controller (PLC), for the Fire System of an Electric Substation; For this, the areas belonging to the electrical substation are initially described, where the automatism is developed, these being three; Patio area (Transformer location), Distribution board area and Control room. Then…

This work implements a MIMO (Multiple Input Multiple Output) FO (Fractional Order) control system for controlling the level and temperature of the water inside a tank by means of two inflow rates: cold and hot water, which are mixed to produce an outflow rate. Such a process exhibits coupling between inputs and outputs. A linear…

This paper examines application of linear general model predictive control (LGMPC). The stability of the LGMPC is proven by means of a demonstration of a theorem stating a sufficient and constructive condition. Lower bounds conditions are found for one of these matrices and then a system with saturation is taken into consideration. The conditions can…

This paper proposed a frequency bandwidth required for the Control and Non-Payload Communications (CNPC) in autonomous operations of the Maritime Autonomous Surface Ship (MASS). The issue was to seek a radio spectrum to meet future demand for safe operations of autonomous ship at sea. As described in Document 5B/841 of ITU-R SG, safe navigation of…

This paper considers active disturbance rejection control (ADRC) as a new control approach for pH neutralization process. The pH process is challenging to control due to its sensitivity to disturbance, nonlinear dynamics, and time-varying characteristics. Special attention is paid to the impact of disturbances typically exists in the chemical process. First, the pH neutralization process…

Current work demonstrates how open-source optimization library ”Extremum” (OSOL Extremum) can be used to build feedback controller of a satellite. Proposed software was developed to as an attempt to eliminate current problems that are present in scientific area: black-box effect (i.e. there is no opportunity to explore source code, modify it, or simply verify), no…