Search Results

Human behavior quantification is an essential part of psychological science. One of the cases is measuring human personality. Social media provide rich text, which can be beneficial as a data source to get valuable insight. Previous researches show that social media offered favorable circumstances for psychological researchers by tracking, analyzing, and predicting human character. In…

The European drone market has been showing steady growth year after year. New EU drone rules will come into force as of July 1st, 2020, with the European Union setting itself the target to replace national rules with a common regulation with the ultimate goal of creating a harmonized European drone market. This study will…

Over time, several routing protocols have been suggested for use in Mobile Ad Hoc Networks (MANETs). Because of availability of so many MANETs routing protocols, network engineers and administrators face difficulties in identifying an appropriate routing protocol for a particular scenario. This challenge results from the unavailability of adequate technical analytic studies designed to examine…

The development of electronic healthcare systems requires to adopt modern technologies and architectures. The use of Electronic Personal Health Record (E-PHR) should be supported by efficient storage such as cloud storage which enables more security, availability and accessibility of patients’ records. Actually, the increase of availability of E-PHR enhances parallel access, which improves the performance…

Modern microcontrollers are capable to realize not only traditional PID-regulators but also adaptive ones. Object of control parameters estimation is the biggest part of adaptive control from the point of view of time consumption. The ways to reduce this time for digital control systems based on ARM-CORTEX 32-bit and 64-bit processors are shown in the…

Prior to the 19th century discovery of Portland Cement (PC), Lime Based Mortar remained popular due to its flexibility, permeability and more importantly, associated low carbon emissions. However, lime’s characteristic delayed setting/hardening time, low mechanical strength, poor internal cohesion and some volumetric changes have overshadowed significance of its outstanding features particularly, flexibility, and consequently put…

Rural electrification and sustainable energy services to the less privileged is à major challenge faced in Nigeria. Off-grid power generation via small hydropower plant would mitigate this challenge. This Paper discusses the awareness and assessment of small hydro power for off-grid electrification in rural/isolated areas in Nigeria. In this research, the method of onsite data…

This research work mainly presents the design and development of a small-scaled wheeled robot, which can be controlled using multiple controlling interfaces using some new technological trends. Raspberry Pi 3 as the main controller, Python as the programming language integrated with the Robot Operating System (ROS) and Virtual Network Computing (VNC) for screen sharing are…

In the software engineering research, several works focus on advantages of multi-modeling, which facilitate modeling a system by separating of concerns. The Model Driven Engineering approach relies on model to design software artefacts during the software development lifecycle. Handling such models involves describing some model management operators like ‘ composition ‘. That is an operation…

One of the most critical challenges that large companies, small enterprises and research institutes face, when commercializing their innovations, is the transfer process at the moment of scaling up. These organizations often transfer their innovation to either existing business units or create a new business entirely. The process of transferring innovations to an existing unit…

In this study, a theoretical simulation was performed using the Schrodinger-Poisson method to elucidate the formation factors for two-dimensional electron gas in InGaAs-based HEMTs. No visible change was observed in the carrier density and the potential shape. The inflection point of the energy level and the agreement of the energy level in each dimension were…

Object Instance Recognition aims to classify objects specifically and usually use a single reference image. It is possible to be used in many applications such as visual search, information retrieval and augmented reality. However, various things affect the appearance of the objects, which makes the recognition process harder, especially if a single reference image is…

Higher Education Institutions (HEIs) have begun rapidly adopting, selecting and implementing ERP systems due to the call by various governments to streamline their processes and practices. While ERPs are expanding at much faster rate, there is pressure on most HEIs to ensure quality. For quality model, ISO/IEC 25010 is an international standard for software and…

Flash memory reliability and the performance have been confirmed as an improvement in the storage subsystem technological advancement, especially in supporting an embedded system solution. Conversely, the main constraint of the storage device is the erase-before-write characteristic in handling both write and re-write I/O operations. More attention must be taken into consideration to handle both…

Time-series is a sequence of observations that are taken sequentially over time. Modelling a system that generates a future value from past observations is considered as time-series forecasting system. Recurrent neural network is a machine learning method that is widely used in the prediction of future values. Due to variant improvements on recurrent neural networks,…

This paper presents a collaborative interaction model (CIAO) and several behaviour rules that could enhance brainstorming results. The model is composed of five elements which may be used during brainstorming sessions, consisting of activities performed by partici- pants which are characteristic of different modes of interaction. Some sequences of these interactions may be considered more…

The internet of things has resulted in the design and development of many electronic sensors that need to be integrated with various technologies. Engineering academics need ongoing training relating to this integration as they need to subsequently teach their students. This relates to continuous professional development. The purpose of this article is to illustrate how…

The goal of this research work is first to investigate the comparison between a batch and a continuous pyrolysis reactor (at 500, 550 and 600 °C) and the eventual differences and similarities that are obtained by analysing the obtained liquid and gas compositions. All the products formed were examined: liquids by GC-MS/FID and Karl Fischer…

In recent years, research has been conducted focused on the use of technologies in the classroom, but one of the main problems is to demonstrate that the use of this technology favors learning compared to traditional methods. One of these technologies is augmented reality that allows seeing virtual objects superimposed in the real world, but…

The possibility to apply non-linear transformation of the Wilson-Hilferty type to the Pois- son random variable is investigated using an analytic approach, in order to improve the convergence towards the large-parameter Gaussian limit. Considering the already existing non-linear transformation for the Gamma distribution, the original Wilson-Hilferty and a higher-order transformations are showed and approximations for…

In recent years there has been technological growth in the field of facility location, considering it as a significant factor to achieve greater competition among companies. The present work gives a methodological solution for a territorial redesign in a Mexican automotive parts distribution company with the support of Geotechnological tools like Geographic Information Systems (GIS)…

In this work, an integrated metamaterial filter design in close proximity with monopole antenna is proposed for vehicular communication applications. A cylindrical screen formed by an array of metamaterial cells is designed to be reflective at 5.9 GHz in order to enhance antenna performance in intelligent vehicle transport systems. The unit cell proposed design based…

In recent years, several projects which are supported by information and communications technologies (ICT) have been developed in the agricultural domain to promote more precise agricultural activities. These projects account for different kinds of key ICT terms such as internet of things (IoT), wireless sensors networks (WSN), cloud computing (CC). These projects are used for…

Stirling engines working with relatively low temperature are attractive for the future, especially for applications like water pumping without concentration system and low temperature heat recovery. The present work is the continuation of a series of works on the optimization of this type of machines. The main objective of this paper is to investigate the…

A Software Defined Network (SDN) architecture is characterized by decoupling the data plane and control plane. This feature enables the establishment of a programmable environ- ment in which the control plane acts under the data plane, managing and configuring the network over a standard protocol, such as OpenFlow. Although there are numerous benefits to the…