Search Results

The ability to verify the critical risk factors related to an effective diagnosis is very crucial for improving accuracy on coronary heart disease prediction. The objective of this research is to find the best predictive model for coronary heart disease diagnosis. Three approaches are set up to achieve the goals (1) investigating the classifier algorithms…

This paper studied the bending analysis of an isotropic rectangular plate for the effects of aspect ratio, shear and deflection on the critical lateral load of the plates using the polynomial shear deformation theory (PSDT). One of the plate is clamped at opposite edge clamped and the other opposite edge simply supported (CSCS). The other…

In this paper, the multi-objective optimization process was applied for the surface grinding process of 3X13 steel using an aluminum oxide grinding wheel (WA46J7V1A). For each experiment, three cutting parameters, including the workpiece velocity, feed rate, and the depth of cut, were controlled to change according to the experimental matrix. At each experiment, surface roughness…

There have been many activities to train the brain to remain active, one of its activities is by playing games. Games with the right presentation can train the brain as a whole. This research is focused on High-Order Thinking Skills (HOTS) in order to be able to train the brain’s ability in players. Can be…

Bearings are the key components of many rotating machines, in which serious failure or even major breakdown may occur due to their abnormal operation and defects. Thus, accurate fault diagnoses of bearing elements are essential for proactive predictive maintenance. However, the using of multiple sensors with high sampling rate reveal considerable shortages in the analysis…

Harmonic distortion is a problem that can be caused by the use of power electronic devices. The effect of harmonics has an impact on changes in the input voltage source waveform which is referred to as wave defects. This incident has an impact on electronic faults and overheating of the power transformer coil as a…

Crowdwork is a system that brings job providers and crowdworkers in a portal. Nowadays, many companies are turning to freelancing rather than hiring full-time employees. In addition, the workers have also switched to working as freelancers. New problems also arise in the crowdwork system. Trust is one of the main issues that arise in the…

In this paper we design a large scale reconfigurable digital bio-inspired computing model. We consider the reconfigurable and event driven parameters in the developed field-programmable neuromorphic computing system. The various Intellectual Property (IP) cores are developed for the modules such as Block RAM, Differential Clock, Floating Point, and First In First Out (FIFO) for the…

Sign language is one of the languages which are used to communicate with deaf people. By using it, they can communicate and understand each other. In Indonesia, there are two standards of sign language which are SIBI (Sistem Bahasa Isyarat) and BISINDO (Bahasa Isyarat Indonesia). Deep learning is a model that is used to apply…

Application in the field of medical development has always been one of the most important research areas. One of these medical applications is the early prediction system for heart diseases especially; coronary artery disease (CAD) also called atherosclerosis. The need for a medical diagnosis support system is to detect atherosclerosis at the earlier stages to…

With recent advancements in medical filed, the quantity of healthcare care data is increasing at a faster rate. Medical data classification is considered as a major research topic and numerous research works have been already existed in the literature. Presently, deep learning (DL) models offers an efficient method for developing a dedicated model to determine…

Machine learning classifiers provide many promising solutions for data classification in different disciplines. However, data classification at run time is still a very challenging task for real-time applications. Acceleration of machine-learning hardware solutions is needed to meet the requirements of real-time applications. This paper proposes a new implementation of a machine learning classifier on Field…

Over the last decades, numerous distributed consensus-based algorithms have found a wide application as a complementary mechanism for data aggregation in wireless sensor networks. In this paper, we provide an analysis of the generalized Metropolis-Hastings algorithm for data aggregation with a fully-distributed stopping criterion. The goal of the implemented stopping criterion is to effectively bound…

Since the release of of the IPv6 Routing protocol for Low-Power and Lossy Networks by the IETF ROLL working group, several enhancement schemes were proposed. In fact, They aim to extend the network lifetime, reduce congestion, mitigate end to end delay and moderate energy consumption. In fact, considering the vast area of Low-Power and Lossy…

East Java province is a large province in Indonesia, in which Surabaya is the second largest metropolitan city after Jakarta. Various problems of development inequality in East Java have caused East Java to be defined as a disadvantaged area in 2015. The determination of disadvantaged regions is carried out every 5 years using 6 criteria…

This paper focuses on a string encoding algorithm, which produces sparse distributed representations of text data. A characteristic feature of the algorithm described here, is that it works without tokenizing the text and can avoid other data preparation steps, such as stemming and lemmatization. The text can be of arbitrary size, whether it is a…

The dog is one of the first animals domesticated by human, and for thousands of years, it has been artificially bred into hundreds of types in order to provide certain traits that humans want. Nowadays, the selection of dogs by potential adopters has become a problem due to the availability of different type of breeds…

Suppose we want to classify a query item Q with a classification model that consists of a large set of predefined classes L and suppose we have a knowledge that indicates to us that the target class of Q belongs to a small subset from L. Naturally, this filtering will improve the accuracy of any…

The text’s production carried out in this research aimed to 5-year-old children from the IE 555 Inmaculada Concepción, under the modality dictated to adult, had a design and application of 22 sessions during three months with the experimental group. On their methodological approach was based on the expression ludocreative, articulating the written experience jointly with…

Cancer is the leading cause of death in world. Currently, there are no approved vaccines to avoid the spreading of this disease. Drug discovery have played important role for discover of new potent drugs that could efficiently and cost-effectively. Pyrazoline analogue compounds known to have good potency as anti-cancer. The aim of this study is…

Education has seen the rapid development of online learning. Many researchers have conducted studies on the use of recommendation systems in online learning. However, until now, several similar studies still focus on the accuracy of the prediction results. Various obstacles were encountered related to changes in the face to face learning process into online learning.…

Dengue fever (DF) is a tropical disease spread by mosquitoes of the Aedes type. Therefore, a DF outbreak needs to be predicted to minimize the spread and death caused by it. The spread of dengue fever is a spatial problem. In this paper, we adopted the Multi Linear Perceptron (MLP) to solve the spatial problem,…

In this paper, the performance evaluation of a line-start three-phase Synchronous Reluctance Motor (SynRM) with symmetrical distributed brass rotor bars is presented. The machine, which has been designed from a conventional three-phase induction motor (IM) NEMA frame stator is proposed as an alternative to a squirrel cage induction motor (SCIM). The 2D Finite Element Analysis…

Optimal integration of distributed generation (DG) into the distribution system results in reduced power losses and improved bus voltages. In this article, a combination of two techniques has been analyzed: The integration of DG and reconfiguration of the distribution system by removing the Normally Open Point NOP in different places of the system. These two…

Low power OTAs are the most preferred circuits in the realization of continuous time filters of analog front end of wearable healthcare devices. A low transconductance OTA with series parallel current mirror to realize large time constant of the filter is designed. The differential pair of the OTA uses bulk driven PMOSFETs and the subthreshold…