This paper presents an efficient Maximum Power Point Tracking (MPPT) controller for photovoltaic modules. The MPPT technique consists of a combination between backstepping controller and artificial neural network (ANN).The (ANN) has been employed to generate the optimum voltage, which corresponds to the maximum power voltage delivered by photovoltaic modules, while the backstepping controller is developed…

The main objective of this research is to analyze the impact that the implementation of a strategic plan would have on achieving the competitiveness of the micro, small and medium enterprises (MSMEs) that are dedicated to bottling, marketing and distributing water in the city of Los Mochis. It is intended to offer a tool to…

Interpreting data for solving information needs demands an understanding of the semantics of row data. In this paper, an ontology-driven management of data of the presence of radon gas in soil is presented. The main contribution of this research relies on the formal definition of the semantic of the presence of radon in the dimensions…

In this report, polymeric composites made from Polypropylene (PP) and talc powder were studied. The talc powder with different portions of 10%, 20%, 30% by weight was used to create samples. The samples were examined by the tensile test and the flexural test according to ASTM D638 and ASTM D790. The surface morphology of the…

Until recent years, code quality was not given due significance, as long as the system produced accurate results. Taking into account the implications and recent losses in critical systems, developers have started making use of static code analysis tools, to assess the eminence of source code in terms of quality. Static code analysis is conducted…

The problematic of plastic pollution in the world has led to an interest in the research and development of thermoset starch-protein blend bioplastics as a possible alternative for single use non-recyclable plastics. However, these bioplastics lack the physico-chemical characteristics that make them useful as a replacement for the currently used plastics. This work aims to…

Fault-tolerant applications are created by replicating the software or hardware component in a distributed system. Communications are normally carried out over an Ethernet network to interact with the distributed/replicated system, ensuring atomic multicast properties. However, there are situations in which it is not possible to guarantee that the replicas process the same data set in…

The paper addresses speeding up meetings in a networked environment during rescue works in a transport emergency. Several groups of representatives of various services and observers participate in those meetings. The number of wrong decisions tends to increase because remote participants cannot understand each other quickly. First, the meetings must be efficiently held to avoid…

The world is facing an unprecedented virus outbreak, COVID-19, hitting more than 200 countries. Governments have been striving to prevent the spread of the virus through the lockdown. During the strict lockdown in Jordan, people needed to stay home, and they used available social networks to keep updated on COVID-19, with Facebook, the most popular…

This paper is carrying out a practical identification of a DC servomotor from input and output data. The system’s step response was obtained from an acquisition card that we have developed using a microcontroller. The data is collected and downloaded to the PC Thought RS232 Protocol to process the identification process using polynomial models (ARX,…

The fight against poverty in the Peruvian Andes is a complex task in which various professionals, such as engineers, economists, anthropologists, among others, participate. The uncertainty of the decisions taken today, no matter how appropriate they may seem, such as million-dollar investments in irrigation infrastructure, can result in over-production and, therefore, in economic recessions. For…

In this study, an adaptive nonlinear sensorless controller for doubly fed induction generator (DFIG) driven by a wind turbine is proposed. The aim is to maximize the extracted power by tracking the wind turbine optimal torque-speed characteristic without the need for rotor speed measurement. This controller ensures a satisfactory tracking of both stator flux and…

Sign language is a form of communication language designed to link a deaf-mute person to the world. To express an idea it requires the use of hand gestures and body movement. However, the bulk of the general population remain uneducated to understand the sign language. Therefore, a translator is required to facilitate the communication. This…

In a radial distribution system, component failure leads to service interruption and subsequent disconnection of a few load points. An abnormal variation in the voltage levels and high power loss gives rise to reliability issues. In this work, feeder reconfiguration is performed to improve reliability, minimize voltage deviation and power loss. A Binary Particle Swarm…

This paper presents an integrated solution for a fault-tolerant three-phase permanent magnet synchronous motor (PMSM) field-oriented control drive subjected to an open-phase fault (OPF) integrated with effective fault-tolerant detection methodology. The fault detection methodology is based on model predictive current control (MPCC), which is easy to apply, detect OPF in a range of microseconds, and…

This paper describes methods of eliminating Unmanned Aerial Vehicles (UAV) non-destructively, using Electronic Warfare Methods. The aim is to introduce certain methods of UAV detection and elimination in a complex environment and terrain, e.g., in an urban and battlefield environment, that will result in finding the control device position and the UAV itself. Neural networks,…

In this report, a probe mark discoloration with donut/circle shape was found. The corrosion formed on Aluminum bond pads. The SEM/EDS, TEM/EELS & AES surface techniques were used to identify this corrosion product. All these material analysis results pointed out the role of fluorine to this discoloration. The HAST testing, all the chip samples obtained…

Family functionality is when the family meets the needs of its members, especially adolescents. Resilience is the adolescent’s ability to face situations in which there are difficulties, life problems and thus be able to overcome them. The purpose of the study is to determine the Level of Resilience and Family Functionality in Adolescents of two…

The article describes a way to increase the efficiency of an abrasive tool by its impregnation in an aqueous solution of chromium diiodide. The device scheme for impregnating the instrument is proposed. Research results of durability of tools impregnated with chromium diiodide and structural condition of material of a surface layer of details after processing…

Text classification is considered one of the most fundamental and essential problems that deal with automatically classifying textual resources into pre-defined categories. Numerous algorithms, datasets, and evaluation measurements have been proposed to address the task. Within the era of information redundancy, it is challenging and time-consuming to engineering a sizable amount of data in multi-languages…

In recent decades, the challenge of managing the development teams spread across different time zones has become increasingly common, raising the importance of the development of Global Software Development (GSD) techniques, in order to tackle its particular problems. This work discuss these issues in the context of Sidia, an R&D institute which implements technological solutions…

A grid is a system that can manage and organize services and resources that spread amongst different control domains, employ interfaces and protocols, and offer a high quality of services. The integration of Multi-Agent Systems (MAS) with a grid environment significantly affects grid performance. MAS is considered a suitable solution for open systems that modify…

Currently, increasing penetration of the Wind Energy Conversion System (WECs) in Power generation systems has influenced the supply of electrical power reliability for the consumer in comparison with other traditional sources. In this paper, the performance and efficiency of a new optimization approach referred to as the “Differential Evolution Optimization Algorithm” (DEOA) to measure the…

Digital twins act through application programming interfaces to their physical counterparts to monitor, model, and control them. Beyond these traditional functions of digital twins, they must also act to secure their physical counterparts. A multi-model scheme is presented to help digital twins towards the task of securing the physical system. Additionally, this work includes an…

Facial emotion recognition is one among many popular and challenging tasks in the field of computer vision. Numerous researches have been conducted on this task and each proposed either standalone- or ensemble-based processing technique. While many researches strive for better accuracy, this research also attempts to increase the processing efficiency of computer correctly classifying human…