Ultra-high resolution broadcasting such as 4K and 8K are becoming more popular for at-home use. The position of the viewer’s mean gaze point when they are looking at a larger display depends on the video clip, viewing position, and viewing distance. The International Telecommunication Union provided the document BT-2022; as the standard viewing conditions for…

Age and growth are two essential rice biophysics parameters used to determine the health parameters and production rate. The spatial data of both parameters can utilize remote sensing technology, which in turn makes use of several vegetation indices to achieve accurate estimation. However, due to the rapid changes in rice plants’ characteristics, it is essential…

Vietnam is one of the top 5 largest shrimp exporters globally, and Mekong delta of Vietnam contributes more than 80% of total national production. Along with intensive farming and growing shrimp farming area, diseases are a severe threat to productivity and sustainable development. Timely response to emerging shrimp diseases is critical. Early detection and treatment…

This study examines the potential of solar energy in the urban environment with a case study in Semarang, Indonesia by analyzing the intensity of solar radiation and the residential rooftop area. The study aims to obtain a quantitative description of the potential for electricity production from rooftop solar photovoltaic systems in residential areas and estimate…

To have enough information on time can be helpful when companies try to reduce costs and operate more efficiently. An international company that supplies parts for the automotive industry is currently testing its new facilities in Mexico. The relocation of the raw materials and finished goods warehouses were tested using a P-Median model. The operating…

In Peru, approximately since 2013, a necessary change has begun in the importance given to research, science, technology, and technological innovation. Likewise, in 2014, a new University Law was approved that among other aspects also promotes research production in universities. Against this context, the universities begin to improve with more emphasis activities related to research.…

The increasing cost of fishmeal and soybean meal forces us to look for unconventional sources of protein to feed guinea pigs, being able to use earthworm meal Eisenia foetida (EF) with 60-80% high quality raw protein; for this, the contribution of digestible nutrients and metabolizable energy must be known to formulate rations. The objective is…

The differences of stunting through socio-economic and productive indicators in high Andean community of Peru were evaluated ((11°42′58.16′′ S, 75°37′31.13′′ W, altitude 3470 m). Cross-sectional study in 52 mothers with children under 5 years old was carried. A validated nutritional survey was applied. Z-scores height for age and nutritional status were determined using anthropometric methods…

The digital factory is a concept signing a new era for industry, the so-called Industry 4.0, in which ordinary production systems like manufacturing plants, machineries and utilities are being equipped with diagnostic and sensitive instrumentation to be connected to digital shared networks. This data-sharing, trough the big data management techniques, is a fully integrated base…

News companies have a need to automate and make the process of writing about popular and new events more effective. Current technologies involve robotic programs that fill in values in templates and website listeners that notify editors when changes are made so that the editor can read up on the source change on the actual…

The study objective was to design and evaluate the agroecological system of an agricultural model with vegetable covers (Luffa cylindrica, Cyclanthera pedata and Mucuna pruriens) associated with tomato plants (Lycopersicum esculentum Mill), Rio Grande and Cherry varieties. The agroecological system is shown with its components of inputs, processes and outputs. The main entrances being solar…

Productivity is increasing when less input was used in getting the same outcomes. Thus, the effectiveness of productive effort, especially in industry, as measured in terms of the rate of output per unit of input. As in derivative rubber industry which is producing the seal product for final assembly of Disc Drive. The function of…

Agriculture, being the vital sector, contributes to India’s GDP by 18%. It is necessary to enhance the production in this sector with minimal need of resources to get the good yield of crops. It in turn boosts up the necessity of automation in the field of agriculture. This paper discusses about the experimental study which…

Since environmental requirements penetrate engineering processes to keep global warming and to reduce pollutant emissions, the system operation should be designed based on environmentally approach friendly. Operationally, the system processes are supported by energy suppliers to meet continuously energy transaction while clean and green energies are also targeted to keep the environmental conditions. In other…

Manufacturing System (MS) sizing is a crucial task to complete in order to obtain the desired MS performance and efficiency. It involves selecting the required number of resources from each used type in a given planning horizon. In fact, different approaches coupling simulation/optimization tools have been developed to solve this issue and evaluate the MS…

Perishable inventory management contributes simultaneously to society and the economy, by reducing food wastage and capitalizing on the freshness of goods. For this reason, countless mathematical models have been developed for their effectiveness and cost-efficient management. Yet, the majority of these models can only optimize systems for a limited time frame, allowing for small gains…

We have suggested an architecture of the second-order all-pass active RC-filter (ARCF), based on three differential difference amplifiers (DDA’s), which provides full set of amplitude-frequency responses (AFR’s) (low pass filter (LPF), high pass filter (HPF), band pass filter (BPF), rejection filter (RF)). We have given the basic equations, which allow ARCF’s. The results of computer…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

This paper is an extension of work originally presented in 2018 Global Smart Industry Conference (GloSIC). Researches are devoted to the development of Smart technology for complex objects control and prediction on the basis of a distributed Honeywell DCS control system of the TengizChevroil enterprise using the example of a technological process of medium pressure…

High Performance Computing (HPC) systems offer excellent metrics for speed and efficiency when using bare metal hardware, a high speed interconnects, and massively parallel applications. However, this leaves out a significant portion of scientific computational tasks, namely high throughput computing tasks that can be trivially parallelized and scientific workflows that require their own well-defined software…

This paper investigates the electronic book production and distribution practices adopted by the Publishers in Southeast Nigeria because of the global growing interest in writing new book titles in digital form as well as converting paper titles to digital content. To investigate this study, the researcher formulated three research questions to guide the study. A…

Production of garri (edible processed and granulated form of cassava) and sustaining the production process has become so laborious, time consuming, and predisposes one to some form of danger, especially as it concerns the hot fire that one is disposed to during the process. In west African tradition, where this garri serves as one of…

The torch relay for the 2017 Taipei Summer Universiade started June. The innovative torch design was altered and tested, follow-up production successfully. For preventing weather effect, the head of the torch embedded with a unique airflow structure that allowed the sacred flame to pass the wind and rain tests. The safety lantern displays a 3D…

The energy marathon is becoming increasingly based on renewable sources, whereas the continuous decrease on the cost of energy production has supported in last decade, for instance, the development of large-scale offshore wind applications. The consistency and availability of the AC-working equipment portfolio is only limited by physical application boundaries, which are quite evident in…

In this paper an efficient feedback quantization technic for beamforming in MIMO systems is presented. The proposed technic named time domain quantization TD-Q is based on the feedback of time domain parameters necessary for the reproduction of the beamforming matrix at the transmitter. This TD-Q presents the same performance than the conventional Givens rotation quantization…