Search Results

A novel design of a dual motion mechanism for a high-voltage gas circuit breaker is presented. The contact motion of the circuit breaker due to the operating mechanism increases capacitive current switching (CCS) performance. CCS is one of the interrupting duties of the circuit breaker, where high voltage is applied during the half cycle from…

The purpose of this research paper is to demonstrate that optimization of energy consumption, distributed generation and storage contribute towards mutually beneficial and satisfactory Demand Side Management algorithms that can be installed into consumer smart meters or in Home Energy Storage. A new solution based on an Energy Scheduling and Distributed Storage (ESDS) and Microgrid…

Information data recognition during traditional operating step in telecommunication system, as their interpretation, presents an important active research field. In this context, we propose as a solution multi-agent data identification system starting with received signal parameters in antenna network connected on board telecom system. Due to the Information Identification Data (IID) response variability that differ…

This research aims to enhance the generated power of the small-scaled wind turbine using the eddy current brake system and Maximum Power Point Tracking (MPPT) control method. We analyzed the behavior of the generated power and power factor, with and without the MPPT control which implemented by eddy current brake system. Also, the feasibility of…

The research in general aims to develop students’ writing skills by applying a model with reader response strategy and visual symbols to promote students’ morals. Specifically, this inquiry is expected to describe the acceptability, comparison, impact, strength, and shortcomings, and the model Adapting To Individual Differences (ATID) of Indonesian literature learning to promote writing skills.…

The article sets forth the solution of the educational resources semantic context knowledge components development task, based on the learning technology project-oriented concepts, graduate’s competency model and ontological; engineering. The being considered ontology model and knowledge display formalisms allow, firstly, relevantly image the educational resources semantic context in the support concepts ontology format, and their…

With a model predictive control approach including boundary analysis and uncertain prediction of activities of different road participants, this paper proposes solutions that support motion control by steering control and appropriate acceleration to create safe motion trajectories for an autonomous vehicle. The motion control support element is determined by the principle of minimal intervention and…

In Peru, approximately since 2013, a necessary change has begun in the importance given to research, science, technology, and technological innovation. Likewise, in 2014, a new University Law was approved that among other aspects also promotes research production in universities. Against this context, the universities begin to improve with more emphasis activities related to research.…

The human gut environment can contain hundreds to thousands bacterial species which are proven that they are associated with various diseases. Although Machine learning has been supporting and developing metagenomic researches to obtain great achievements in personalized medicine approaches to improve human health, we still face overfitting issues in Bioinformatics tasks related to metagenomic data…

A high efficiency InAs/GaAs quantum wire solar cell is modelled embedding periodic array of InAs quantum wires (QW) in the intrinsic layer. The promising low dimensional heterostructure such as Quantum Wells, Quantum Wires, Quantum Dots or Dashed (elongated Dots) based intermediate-band-gap solar cells are recently being grasped the attention for ongoing third generation solar cell…

21st century learning focuses on the flow of information, media, and technology. In Malaysia, many university students face problems in English writing. Thus, students should be exposed to the technology training in innovative ways to produce students with a dynamic in this ever-changing world. Recently, the transformation and the evolution of mobile have created a…

The Center for Analysis and Information Services (Palinfo) at the Judicial Commission closely related to the management of information systems which are used to process organizational internal data and information systems on public services. Data processing and network management have an information system security risk. The Judicial Commission seeks to reduce risk and improve the…

Oscillator phase noise (PN) has a strong impact on the spectral purity of the RF signal in wireless systems and is, therefore, a main challenge when designing a local oscillator. In this paper, we propose a new approach for designing a low PN oscillator based on the Time-Invariant Linear Model of phase noise. It leads…

In this work, we completed a validation of the Varian Clinac IX equipped with the High Definition Multi-Leaf Collimator (HD 120 MLC) instead of the removable jaws, using GATE Monte Carlo Platform version 8.2. We validated the multileaf collimator (MLC) geometry by simulating two dosimetric functions (Percentage Depth Dose (PDD) and Dose Profile (DP)), for…

With a model predictive control approach and to set the motion trajectory for an autonomous vehicle in situations where emergency braking cannot be performed, in this paper, we propose a solution to apply the law on road traffic into a set of constraints and thereby build an objective function to create motion trajectory for autonomous…

In the smart power grid, designing an efficient and reliable communication architecture has an important role in improving efficiency, and maintaining the connectivity of different network components. The home area network (HAN) provides an energy management system in houses since it enables home energy control and monitoring. So, it is imperative to determine a HAN…

Face explicitly provides the direct and quick way to evaluate human soft biometric information such as race, age and gender. Race is a group of human beings who differ from human beings of other races with respect to physical or social attributes. Race identification plays a significant role in applications such as criminal judgment and…

Many organisations adopt and implement information technology (IT) but fail to operationalise it. As a result, the process of implementation is continually repeated without achieving the goals and objectives, which are often to gain competitive advantage and sustainability. This study employs structuration theory as lens to examine and understand the factors that influence operationalisation of…

Recently, digital image forgery detection is an emergent and important area of image processing. Digital image plays a vital role in providing evidence for any unusual incident. However, the image forgery my hide evidence and prevents the detection of such criminal cases due to advancement in image processing and availability of sophisticated software tamper of…

This paper presents a design optimization of a dual-band branch-line coupler with stepped-impedance-stub lines. This coupler operates over 5G NR frequency bands n5 and n2, developed by 3GPP for the 5G (fifth generation) mobile network, and these two bands are centered at 0.85 GHz and 1.9 GHz respectively. To achieve the design specifications an adjusted…

Competitive sport has one phenomenal or fundamental aspect of selecting players into playing squad for a game that can influence a Club or a team in almost all major aspects. Various Characteristics or behavioral aspects of players will be instrumental towards the selection of a specific player into a team depending on the nature, level,…

The banking industry is very competitive. To utilize the information, they have in order to be a competitive advantage winner is reasonably very crucial for the company. At present, the company does not only focus on the company’s strategy that prioritizes products (e.g. product or service oriented), however also necessitates to focus on the company’s…

Nowadays, process automation and smart systems have gained increasing importance in a wide variety of sectors, and robotics have a fundamental role in it. Therefore, it has attracted greater research interests; among them, Underactuated Mechanical Systems (UMS) have been the subject of many studies, due to their application capabilities in different disciplines. Nevertheless, control of…

Many advances in computer systems and IT infrastructures increases the risks associated with the use of these technologies. Specifically, intrusion into computer systems by unauthorized users is a growing problem and it is very challenging to detect. Intrusion detection technologies are therefore becoming extremely important to improve the overall security of computer systems. In the…

Several drive mechanisms for different robots are at hand in current days. Bicycle steering, Ackerman steering, differential drive are some principal drive mechanisms that are being deployed in robots these days. The differential drive needs the wheel rotations to be updated very frequently. But it is most commonly deployed on the robots with two wheels…