Usually, after properly biasing an analog circuit we need to linearize its transistors in order to linearize the entire circuit for performance analysis and design. This linearization is done through modeling of devices, which is becoming more and more complicated as the electronic technology advances. This is not of course a major issue for circuit…

This paper is the extension of the work originally presented in 2nd International Conference on Man and Machine Interfacing (MAMI 2017) and the paper of Yue et al. The present study aims at observing the effect of various parameters on temperature distribution profiles at various environmental temperature, tissue thermal conductivities, metabolic rates, blood perfusion rates,…

Transport planners and engineers frequently face the challenge to determine the best design for a specific junction. Many road design manuals provide guidelines for the design and evaluation of different junction alternatives, however these mostly refer to specialized software in which the performances of design alternatives can be modelled. In the first stage of the…

Nd:YAG laser has shown some potential to be used in dental practice replacing the conventional method. In particular, it can be used to modify the tooth surface by the ablation process. The laser provides an ability to accurately deliver a significant amount of energy into a confined region. Thus, alteration of the sample surface and…

A design of elliptical printed dipole antenna based on neural network approach is presented in this paper for recent WiMAX, Bluetooth, WLAN, LTE, and future 5G applications. The dipole patch is printed on top of substrate which has relative permittivity of 2.2 and 0.787mm of thickness. The elliptical dipole antenna is single band and the…

The physically-based environmental model is a crucial tool used in many scientific inquiries. With physical modeling, different models are used to simulate real world phenomena and most environmental scientists use their own devices to execute the models. A complex simulation can be time-consuming with limited computing power. Also, sharing a scientific model with other researchers…

A sequential pre-treatment of demineralization and torrefaction, was carried out on palm empty fruit bunches (EFB). EFB and demineralized EFB (DEFB) were torrefied in a vertical tubular reactor in the temperature range of 200 to 280 °C for 30 mins under nitrogen (flow rate:100 mL/min. The pretreated samples were characterized using proximate and ultimate analyses,…

Intelligent Transportation Systems (ITS) applications can take big advantage of Context Awareness approaches. Parameters such as user mobility, passengers comfort reaction and pollution emission levels (CO2) can enrich such applications during the decision making phase. Moreover, the expanding in ITS services offers great opportunities for travelers to find the best route to reach their destinations…

Nowadays, many companies and organizations use various encryption techniques to secure their private data before send it through the unsecure network. However, many attackers try to store private data by using various attacks. Most of the organizations use password based encryption algorithm (PBE) to protect their private data. However, the existing PBE methods are vulnerable…

The contents of this article consist of an extension original work presented at the 4th International Conference on Control, Automation and Robotics (ICCAR 2018) and aims to develop the systematic model of an effective triggering system of production Kanban size towards Just-In-Time (JIT) production system. The developed model was introduced based on the philosophy of…

DC power is apparently attempting to breach into the power system – the system which it once lost to the AC power paradigm. DC is already present in the generation, transmission and utilization sides of the system, leaving distribution as the only area where it has not shown any significant presence – this may be…

This paper is an extension of work originally presented in the 19th International Conference on Computer Supported Education and Information Technology. This paper identifies motivational factors that ensure the initiation and effective implementation of mathematical activity. These factors are in subordination to each other, forming a hierarchical dependence. At the heart of this hierarchy is…

The monitoring of environmental parameters is a critical topic in occupational medicine. With advances in technology, during the recent years, the wearable sensors are widely used to evaluate the ambient parameters. In this paper a compact, small, light-weighted, and configurable sensor node in three physical layers for prolonged chemical ambient monitoring is described. The device…

Cloud Computing is considered nowadays an attractive solution to serve the Big Data storage, processing, and analytics needs. Given the high complexity of Big Data workflows and their contingent requirements, a single cloud provider might not be able alone to satisfy these needs. A multitude of cloud providers that offer myriad of cloud services and…

At present, the wireless charging and data transmission systems developed by major car manufacturers rely heavily on additional transmission equipment. This paper presents a newly developed wireless power and bidirectional data transmission scheme without adding any radio frequency (RF) devices. The battery charge status and vehicle related information can be transmitted bidirectionally in the wireless…

In this research paper, the development and evaluating of a smart controller for electrical powered wheelchairs are presented. The controller aimed to assist quadriplegic, paralyzed, and handicap patients who cannot use their hands to drive an electrical wheelchair by using a joystick controller. Two sub control units have been combined in one hybrid system to…

Recently, several studies focus on a GaN material system that exhibits a significant probability of use in power devices including wide-gap semiconductors. However, the GaN-HEMT is also a structure that easily leads to crystal defects in AlGaN and i-GaN heterojunction. The aim of the study involved investigating the cause of the current collapse in GaN-HEMT…

Conceptually, flood modeling can be done based on process and data availability (data driven model). The implementation of flood mitigation requires accurate data, which can be obtained from high resolution satellite imagery, vertical air photos and high-resolution Digital Elevation Model (DEM). Modeling using high accuracy DEM data can detect landforms in more detail. The objective…

In this study, torrefaction pretreatment on palm kernel shell (PKS) was investigated using fixed bed reactor. The PKS was torrefied at the temperatures of 210, 230, 250, 270 and 290 °C. The characteristics between untreated and torrefied PKS were compared. The results showed that, the mass and energy yield lessened, while the calorific value augmented…

With the increasing need for effective storage management due to ever-growing content-generation over the Internet, Distributed Storage Systems (DSS) has arisen as a valuable tool. Although DSS has considerably improved in the past years, it still leverages legacy techniques in its networking. To cope with the demanding requirements, Software Defined Networking (SDN) has revolutionized the…

Industrial estate firms have important roles in national development through the industrial development. In the course of their life, industrial estate firms ought to follow the firm life cycle pattern. The common pattern shows that the period, in which the firm experiences profit increase, will be directly followed by consistent profit and profit decrease. Should…

In this work, we investigate the effects of variation of processing parameters on the quality of dispersion of polycarbonate compound. In order to achieve appropriate pigments dispersion, we performed compounding process parameters optimizations, by investigating three processing parameters, temperature, screw speed, and feed rate. We utilized experimental design for the optimization of process parameters based…

This paper introduces an electroencephalogram (EEG) analysis method to detect preferences for particular sounds. Our study aims to create novel brain–computer interfaces (BMIs) to control human mental (NBMICM), which are used to detect human mental conditions i.e., preferences, thinking, and consciousness, choose stimuli to control these mental conditions, and evaluate these choices. It is important…

There are more than 7billion people in the world where there are around 500 million people in the world who are denied from normal lifestyle due to physical and mental issue. It is completely fair to say that every person deserves to enjoy a normal lifestyle. While physically and mentally challenged people find suitable way…

This paper presents a novel parametric co-variance assignment strategy for multi-variable stochastic uncertain systems. Based upon the explicit parametric design and reduced-order closed-form co-variance model, the variances and co-variances of the system outputs can be assigned artificially using output feedback while the effect of the system uncertainties can be minimized by optimizing the free parameters.…