Search Results

This research aims to investigate the energy and power management of a battery-supercapacitors Hybrid Energy Storage System (HESS) for Electric vehicles (EVs). A bidirectional DC-DC converter, a battery and a set of supercapacitors were employed to construct the parallel semi-active architecture of HESS. Two strategies of Rule-Base Linear Quadratic Regulators (R-B LQRs) were proposed to…

The need of add-on features (secondary contacts) for current paths of air insulated high voltage disconnectors switching capabilities (e.g. bus transfer switching) is introduced. The relevant product components for the switching capability and their functionality is described, which is giving boundary conditions for adding features necessary to achieve the switching capability. Possible features are discussed…

Manufacturing industry is facing several challenges in power quality and energy consumptions that play a significant role in the cost of goods sold in addition to the operational efficiency of manufacturing plants. The current techniques are not enough to manage the manufacturing processes from power perspectives as it is focusing only on the monitoring of…

The world has turned in the modern era to reduce peak times for electricity consumption, where the peak times cause excessive load on the electricity grid and power stations. In Egypt air conditioning loads are considered the main contributing reasons for the peak time’s problem due to presence of large unshaded glazed surfaces, which cause…

The technics of maximum power point tracking is widely used in solar photovoltaic energy and electric power system applications. Traditionally, these technics are based on conventional methods like perturb and observe and incremental conductance. In this work, three methods based on particle swarms optimization, incremental conductance and adaptive neuro fuzzy inference system are presented. A…

This paper proposes a photovoltaic (PV) integrated shunt active power filter (SAPF) for reactive power compensation, uneven loading and compensation of harmonic current. The control of SAPF is implemented by using adaptive based current estimation algorithm to maintain power factor near to unity and source current sinusoidal at source side. The weights are calculated online…

The filter bank multi-carrier (FBMC) technique is being considered as the major candidates for the 5G schemes. The orthogonal frequency division multiplexing (OFDM) technique is used in 4G but it has drawbacks such as higher Out-of-Band (OOB) power reduction, and higher peak to average power ratio (PAPR). OFDM uses cyclic prefix (CP) extension to overcome…

Phasor Measurement Unit (PMU) is an integral device for tracking, protection, and regulation of the power network. PMU gives synchronised calculations of actual-time data for voltage phasor, current phasor, and the frequency. Placing PMU in every node to observe the power network is not realistic from an economic standpoint and even for big data management.…

This paper covers a new topology, a synchronous wind turbine generator, and a solar photovoltaic generator. The Permanent Magnet Synchronous Generator is linked to the grid by back-to-back voltage source converters (BtB VSC), consisting of a two-stage rectifier and a five-stage Neutral Point Clamped inverter, operated by the Space Vector Pulse Width Modulation technique. A…

In this paper, a modified configuration of Single-Phase Seven-Level Packed U-Cell (PUC) Multilevel Inverter for solar photovoltaic system is presented & investigated for standalone operation. The Seven-Level MPUC Inverter comprises of six semiconductor switches & two DC links which generates seven voltage levels at the inverter output. The maximum amplitude of inverter output voltage is…

This paper aims to design an accurate and robust algorithm for counting the steps based on the smartphone’s accelerometer for indoor applications. Different daily activities have been considered in the experimental scenarios, including normal walking with various smartphone positions and running activities. The detection process’s accuracy is ensured by setting an appropriate segregation approach and…

Transformer health assessment techniques, based on applicable standards, such as the dissolved gas analysis (DGA), through laboratory testing or online monitoring are used to analyze the symptoms of a failure which develops in transformers from an early stage. The DGA from a sample of dielectric liquid taken from the main tank generates information on the…

This paper presents an efficient Maximum Power Point Tracking (MPPT) controller for photovoltaic modules. The MPPT technique consists of a combination between backstepping controller and artificial neural network (ANN).The (ANN) has been employed to generate the optimum voltage, which corresponds to the maximum power voltage delivered by photovoltaic modules, while the backstepping controller is developed…

In this study, an adaptive nonlinear sensorless controller for doubly fed induction generator (DFIG) driven by a wind turbine is proposed. The aim is to maximize the extracted power by tracking the wind turbine optimal torque-speed characteristic without the need for rotor speed measurement. This controller ensures a satisfactory tracking of both stator flux and…

In a radial distribution system, component failure leads to service interruption and subsequent disconnection of a few load points. An abnormal variation in the voltage levels and high power loss gives rise to reliability issues. In this work, feeder reconfiguration is performed to improve reliability, minimize voltage deviation and power loss. A Binary Particle Swarm…

This paper presents an integrated solution for a fault-tolerant three-phase permanent magnet synchronous motor (PMSM) field-oriented control drive subjected to an open-phase fault (OPF) integrated with effective fault-tolerant detection methodology. The fault detection methodology is based on model predictive current control (MPCC), which is easy to apply, detect OPF in a range of microseconds, and…

Power converters in automotive industries are needed to source electronic devices. DC-DC Buck converter allows to drive loads ensuring their safety operation taking the car battery voltage as an input to generate a sub-voltage or current. By means of a control loop, the system makes sure that the output variable has the desired value in…

Currently, increasing penetration of the Wind Energy Conversion System (WECs) in Power generation systems has influenced the supply of electrical power reliability for the consumer in comparison with other traditional sources. In this paper, the performance and efficiency of a new optimization approach referred to as the “Differential Evolution Optimization Algorithm” (DEOA) to measure the…

Wind energy is emerged rapidly as the most important and viable sustainable power source due to the mature technology and wide availability. The integration of wind energy sources and utilization of nonlinear loads having different characteristics results in several challenges in a distribution system. One of which is power quality issue .Hence, in this work,…

In order to balance the power in intelligent distribution networks (Smart Grid or Microgrid), it is proposed to organize a «multi operated virtual power plant». The resources of active and reactive power for which can be obtained using an AC voltage controller with a phase-angle control for regulation of operating modes of the ohmic load…

The revolution in the electrification of conventional vehicles due to increased petroleum prices and environmental concerns has had its impact on three-wheeler vehicles as well. Motorized three-wheeled vehicles, known as Auto-rickshaws, are a standard mode of trans- portation in India. Existing battery operated electric rickshaws (known as E-rickshaws) available in major cities of India faces…

The undulated power supply has dropped to its worst reliability index in most parts of the city despite the installations of distribution transformers to improve the power. In this work, examination of Port Harcourt Town Zone 4 (Z4), Rivers State power distribution system forcing on its operation, planning for future expansion of the system, and…

This paper addresses essential features/issues and proposes solutions that would improve the overall performance of a multi-phase buck converter. Low efficiency at light load is addressed with phase shedding, load fast transient and regulated output voltage spiking/dipping is addressed with novel helper technique at the point of load (output node). An Integrated current sensing is…

Horse power – the prime mover that has been there with humans for ages; chiefly used for transportation in the early days, and later, also used as an energy source leading to the conception of the term – horse power (hp). The current paper presents an interdisciplinary effort that brings forward an approach for evaluation…

Dynamic modeling has been a crucial study in many areas of the engineering field. In this paper, we apply the Newton-Euler equation of motion to a two-DOF parallel mechanism solar tracker which is a close loop mechanism. The aim of this study is to show a simulation of the dynamical model with feedback control using…