VANET as a subclass of MANET is composed of a set of vehicles equipped with wireless transceivers, to build dynamic networks without the need of any pre-existing infrastructure. Over the last few decades, the area of routing protocols in VANETs has been extensively studied. Nevertheless, this area remains even more challenging due to some features…

This article has to specify the quality parameters of a Communications Base Station with 4G-LTE technology, installed in a rural area of Peru. The problem of this investigation is due to the fact that many areas of the country do not have a communications network capable of covering the high demand of the inhabitants; this…

This article develops the design and implementation of an industrial network for the control and supervision of the process of dispatching acetic acid, which aims to reduce the presence of this chemical in the environment, since the process is activated manually by the operators; what generates a lack of precision in several stages of the…

Stability or balance is an integral component to perform daily activities without incurring injury or to be dependent on others. Sportsmen tend to have better balance than non-sports people but less is known about the single-leg balance ability. Furthermore, few studies analyzed the dynamic phase of single-leg stance that may contribute to better overall balance.…

Lean ERP system is considered among the new trends of systems in the manufacturing sector, it has become one of the most widely adopted systems, thanks to its various benefits such as: a centralized database which gathers all the data of the enterprise in a single database which is accessible to all the departments, reduction…

The basics of unconventional design of current circuits of two-valued and multi-valued memory elements (ME) for storing current digital signals and flip-flops of the main types on their basis are considered. A nontraditional method of ME synthesis is proposed, which is based on the mathematical tool of linear algebra. Linear equations, structural and functional schemes…

Recently, opportunistic networks are considered as one of the most attractive developments of ad hoc mobile networks (MANETs) that have emerged thanks to the development of intelligent devices. Due to the mobility-related instability of the paths between nodes and due to the limited buffer and energy resources, the ultimate objective of routing protocols in opportunistic…

With increasing photovoltaic (PV) penetration on distribution feeders, voltage functions is always a challenge. To control these variations due to the intermittent nature of PV generation,many utility companies use the traditional voltage regulating devices such as ON/OFF load tap changers, voltage regulators, switched capacitor banks and reactors. The use of smart inverters (SI) has been…

This article presents the experimental analysis of a rotary machine, Universal Motor Analysis; analysis that obeys the purpose of obtaining the almost perfect understanding of the electromechanical behavior of said unit of analysis; It should be noted that the variables to be analyzed were: voltage, current, power, torque, rpm, and power factor; specifically said data…

This article presents the development of an automatism by means of a Programmable Logic Controller (PLC), for the Fire System of an Electric Substation; For this, the areas belonging to the electrical substation are initially described, where the automatism is developed, these being three; Patio area (Transformer location), Distribution board area and Control room. Then…

Over the past decades, huge efforts have been devoted for image enhancement under uncontrolled scene such as fog and haze. This work proposes Multi-stage de-hazing approach for improving the quality of hazy images. Four main stages are introduced, in our approach, to achieve an automated, efficient and robust de-hazy processing. The first two stages are…

The present paper details a queueing model with two kinds of repair facilities and server timeout. Here the customer arrives in compound Poisson process into the system and the lifetime of the server follows exponential distribution. At the point when the system is vacant, the server waits for customers for a settled time ‘c’. If…

In recent years, development of aerial autonomous systems and cameras have allowed increasing enormously the number of aerial images, and their applications in many research areas. One of the most common applications is the mosaicking of images to improve the analysis by getting representations of larger areas with high spatial resolution. This paper describes a…

This work implements a MIMO (Multiple Input Multiple Output) FO (Fractional Order) control system for controlling the level and temperature of the water inside a tank by means of two inflow rates: cold and hot water, which are mixed to produce an outflow rate. Such a process exhibits coupling between inputs and outputs. A linear…

This research aimed at developing a method of glaze material making from used glass bottle waste combined with kaolin. Then, the microstructure and hardness level of glaze products were characterized. Furnace heaters were used in research to heat glaze material by varying the holding time of 30, 45 and 60 minutes. The composition of glaze…

Nowadays the collaboration of organizations, systems or services becomes more and more answered in practice. Indeed, organizations try to expand their service, other to satisfy the needs of their customers. Thus, the need to work collaboratively with other partners whether internally or externally becomes trivial. However, process modeling in a collaborative environment becomes heavy because…

A fuzzy system is a rule-based system that uses human experts’ knowledge to make a particular decision, while fuzzy modeling refers to the identification process of the fuzzy parameters. To generate the fuzzy parameters automatically, an optimization method is needed. One of the suitable methods provides the Firefly Algorithm (FA). FA is a nature-inspired algorithm…

Content Based Image Retrieval (CBIR) for remote sensing image data is a tedious process due to high resolution and complexity of image interpretation. Development of feature extraction technique is a major portion to represent the image content in an optimal way. In this paper, we propose a feature descriptor which combines the color coherent pixel…

In more recent times, researchers have turned their attention to link prediction and the role link inference can play in better understanding the evolutionary nature of social networking sites. The objective of this paper is to present an in-depth review, analysis, and discussion of the cutting-edge link prediction methods that can be applied to better…

Through the Electrical Discharge Machining, the temperature is very high, which can lead to the material phase’s transformation and affects material properties, which can lead to failure of the products in the industry. This study aims to investigate the effect of a new input parameter (pulse cycle time Tc), with other parameters on the EDM…

As well as physical computing, unplugged activity is important in ICT (Information and Communication Technology) education, that uses information and communications technology to support, enhance, and optimize the delivery of information, and software education. In order to achieve educational objectives in unplugged activity, evaluation metrics of learners are necessary. However, there is little work on…

In this paper, we present a joint source-channel decoding (JSCD) scheme for image transmission. The binary sequences, resulting from the compression of several number of image blocks using arithmetic coding (AC), are written line-wise in the so called read- matrix (RM). In succession, a systematic Low Density Parity Check (LDPC) encoding is applied to the…

The technical and vocational institutions are the key feeders for skilled human capital in the robotic revolution economy. It is essential to engage the students by creating new, affordable robotics at a fraction of the cost. This study presents the design and simulation of a six-axis robot manipulator specifically made for education and training. The…

In advanced technologies nodes, starting from 28 nm to 7 nm and below, the power consumed of integrated circuits (ICs) becomes a big concern. Consequently, actual electronic design automation (EDA) tools are facing many challenges to have low power, reduced area and keep having required performance. To reach required success criteria, and because each picosecond…

Fingerprint data is really protected by cancelable fingerprint template because it can be revoked when compromise and a new one can be reissued. We develop a touchless cancelable fingerprint template whose algorithm was published in our previous work. We implement here the algorithm and conducted several tests on several databases to confirm the stability of…