Face recognition in low resolution images has challenges in active research because face recognition is usually implemented in high resolution images (HR). In general, research leads to a combination of pre-processing and training models. Therefore, this study aims to classify low-resolution face images using a combination of pre-processing and deep learning. In addition, this study…

This paper uses the RC-triggered MOSFET-based electrostatic discharge (ESD) power clamp to conduct ESD from ESD events and not affect the ultra-low power sensor system. Then using the stacked device include stacked MOSFET or stacked BJT to reduce the leakage current which increases with temperature. Moreover, we compare gate-driven method and two-level–driven with both gate-driven…

In the Moroccan seismic code, infill walls are considered as secondary elements and their lateral strength and stiffness are neglected in the design when considering horizontal seismic loads. In this article we propose to investigate the effect of infill on the seismic performance of the buildings. A 6-stories reinforced concrete frame building is investigated. The…

This research work mainly presents the design and development of a small-scaled wheeled robot, which can be controlled using multiple controlling interfaces using some new technological trends. Raspberry Pi 3 as the main controller, Python as the programming language integrated with the Robot Operating System (ROS) and Virtual Network Computing (VNC) for screen sharing are…

Different models and standards of information security were analyzed, to adopt a model that mitigates vulnerabilities, risks and threats in the quota allocation process for the State University in Ecuador. The main objective is defining a prototype for the management of processes and information security in this type of organization. It was used the deductive…

With the addition of thing of internet applications to 5G smartphones, mobile standby time and ultra-low-power sensing systems have become increasingly important. Nowadays, such sensing systems typically reduce power consumption to microwatts. This paper presents segmented and non-binary weighted capacitance DACs, low power, high resolution, an asynchronous clock, a spark-detect, vcm-based switching and direct switching,…

The need for air conditioning in rural areas where there is no source of electricity, leads to look for alternative solutions. Usage of Solar thermal system drive vapor jet refrigeration cycle (VJRC) instead of the traditional air conditioning systems, contributes in the reduction of the Global Worming and Ozone Depletion. The main objective of this…

One of the most prevalent physical limitations of both aging and accidents is immobility. Being bedridden requires great care to avoid the formation of pressure ulcers. Thus, the ‘ActiveRest’ project aimed to develop a textile mattress guard that will contribute to the prevention of pressure ulcers. This textile mattress guard integrates a monitoring system, based…

This study built and tested a research model to determine the determinants that impact students’ actual use of the learning management system. A survey questionnaire was used to gather data from 148 university students who used LMS in their course of study. The structural equation model was used to analyze quantitative data. The study revealed…

The research presents a statistical analysis that characterize the environment of the admitted students to Higher Public Education Institutions, by providing an overview of student’s distribution to the courses of studies offered by universities in Albania, such as, economy, medicine, technical etc., and grouping them according to the relative density of 38 (thirty eight) administrative…

Object Instance Recognition aims to classify objects specifically and usually use a single reference image. It is possible to be used in many applications such as visual search, information retrieval and augmented reality. However, various things affect the appearance of the objects, which makes the recognition process harder, especially if a single reference image is…

Higher Education Institutions (HEIs) have begun rapidly adopting, selecting and implementing ERP systems due to the call by various governments to streamline their processes and practices. While ERPs are expanding at much faster rate, there is pressure on most HEIs to ensure quality. For quality model, ISO/IEC 25010 is an international standard for software and…

Jeju Island is the largest island of South Korea and has an independent electric supply system. The island has a special energy plan that realizes itself a carbon-free region by 2030. Wind and solar energy resources are considered as an important means. The introduction of weather-variable renewable energy generation sources into the electric power system…

We describe an efficient system-level simulator that, starting from the architecture of a well-specified transmissive medium (a channel modelled as single-ended or coupled differential microstrips plus cables) and including the system-level characteristics of transmitter and receiver (voltage swing, impedance, etc.), computes the eye diagram and the bit-error rate that is obtained in high-speed serial interfaces.…

Time-series is a sequence of observations that are taken sequentially over time. Modelling a system that generates a future value from past observations is considered as time-series forecasting system. Recurrent neural network is a machine learning method that is widely used in the prediction of future values. Due to variant improvements on recurrent neural networks,…

To supply a stable and efficient electricity, small-scaled wind turbine’s brake system plays an immense role in various wind speeds. Small-wind power generation systems are difficult to operate in strong wind region since the turbine could be over-rotated and damaged if the brake system is not robust enough to maintain a stable angular velocity. Most…

This paper presents a collaborative interaction model (CIAO) and several behaviour rules that could enhance brainstorming results. The model is composed of five elements which may be used during brainstorming sessions, consisting of activities performed by partici- pants which are characteristic of different modes of interaction. Some sequences of these interactions may be considered more…

Blurred small objects produced by cropping, warping, or intrinsically so, are challenging to detect and classify. Therefore, much recent research is focused on feature extraction built on Faster R-CNN and follow-up systems. In particular, RPN, SPP, FPN, SSD, and DSSD are the layered feature extraction methods for multiple object detections and small objects. However, super-resolution…

Limited functionalities of the Academic Progress Information System (SIsKA) has direct consequences on the quality of thesis management service at the authors’ magister study program of the authors’ university. This research focused on the significant improvement from the previous User Experience Questionnaire (UEQ) result of SIsKA. That significant improvement was based on the recommendations from…

The internet of things has resulted in the design and development of many electronic sensors that need to be integrated with various technologies. Engineering academics need ongoing training relating to this integration as they need to subsequently teach their students. This relates to continuous professional development. The purpose of this article is to illustrate how…

The goal of this research work is first to investigate the comparison between a batch and a continuous pyrolysis reactor (at 500, 550 and 600 °C) and the eventual differences and similarities that are obtained by analysing the obtained liquid and gas compositions. All the products formed were examined: liquids by GC-MS/FID and Karl Fischer…

This is era of new technology; most of information is collected from internet, web sites. Some people uses data from research papers, thesis, and website as it is and publish as their own research without giving proper acknowledgement. This term is known as plagiarism. There are two types of plagiarism detection methods, i) Extrinsic plagiarism…

Nowadays the buildings sector is one of the key sectors to achieve sustainability, with the correspondent consumers, in particular, the household consumers, having the need to perform sustainable choices every day, regarding the appliances to be acquired from the market. This is not only due to government’s growing concerns about sustainability but also with the…

In the new technologies for producing electricity from wind gusts, a new class of wind power converter has been proposed. The hybrid autogyro uses the principle of autorotation to generate lift. This paper proposes to take advantage of this rotation to also generate energy. There are systems that use flying wings or airplanes to reach…

In recent years, research has been conducted focused on the use of technologies in the classroom, but one of the main problems is to demonstrate that the use of this technology favors learning compared to traditional methods. One of these technologies is augmented reality that allows seeing virtual objects superimposed in the real world, but…