Results (1878)
Search Parameters:
Keyword: AIA Comparative Analysis of two Controllers for Trajectory Tracking Control: Application to a Biological Process
The aim of the present work is to guarantee the trajectory tracking of a nonlinear biological process and compare two control approaches. The main objective of this work is to elaborate a fuzzy model and build a fuzzy controllers for a biological process by using the fuzzy Takagi-Sugeno. Two controllers are synthesized, the parallel distributed…
Read MoreSynthesis of QDI Combinational Circuits using Null Convention Logic Based on Basic Gates
Currently, synchronous digital circuits (SDC) may require certain design conditions, such as power consumption, robustness, performance, etc. These design conditions are more difficult to satisfy when SDC are implemented in VLSI (Very Large Scale Integration) technology and in the deep-sub-micron MOS (DSM-MOS) technology. The asynchronous design style has properties that serve as an alternative to…
Read MoreDefined Limited Fractional Channel Scheme for Call Admission Control by Two-Dimensional Markov Process based Statistical Modeling
The increasing demand for advanced services in wireless networks raises the problem for quality of service (QoS) provisioning with proper resource management. In this research work, such a provisioning technique for wireless networks is performed by Call Admission Control (CAC). A new approach in CAC named by Defined Limited Fractional Channel (DLFC) is proposed in…
Read MoreThe Impacts of Distribution Generators’ Size and Location on Power Efficiency and Voltage Profile in Radial LV Networks
This paper presents analytical methods for optimum allocation of distribution generators in a radial distribution network. The aim is to increase power efficiency and reduce loss of power. The ideal size of each distribution generator unit at the identified locations has been carefully selected by making adjustments to loss saving equations and the voltage on…
Read MorePole-Changing Windings for Close Ratio and 1:N Ratio Using the 3//Y / 3//Y Method
Requirement for pole-changing motors emerged at the very early times of asynchronous motor design. Different solutions have been elaborated and some of them are generally used. One of these solutions in use is the so called pole phase modulation method. The so called 3 Y / 3 Y pole-changing winding being subject of this paper…
Read MoreA novel mixed-mode universal biquad employing plus current output DVCCs
This paper refers to a novel mixed-mode universal biquad employing plus current output differential voltage current conveyors with grounded passive components. The circuit performs mixed-mode operation with the selection of the input and output terminals, and it enables low-pass, band-pass, high-pass, band-stop and all-pass responses choosing suitable input signals. The circuit needs no component matching…
Read MoreA Dual-Band 90-Degree SiGe HBT Active Phase Shifter Based on Band-Pass and Band-Stop Designs Using Dual-Band Resonators
A dual-band 90-degree SiGe HBT active phase shifter based on band-pass and band-stop designs using dual-band resonators is presented in this paper. The active phase shifter employs differential configuration and has band-pass and band-stop filters in the load circuit. By switching two output ports of the differential amplifier, 90-degree phase shifting has been realized at…
Read MoreTextural Analysis of Pap Smears Images for k-NN and SVM Based Cervical Cancer Classification System
Early detection and treatment of cervical cancer is crucial to patients’ recovery with a reported success rate of nearly 100%. Presently, Pap smear test which is a visual inspection of cells collected from the ectocervix is the screening tool mainly used in cancer prevention programs. The Pap smear is relatively easy to handle however, it…
Read MorePsychoacoustical Approach in Soundscape Characterization
Four different soundscapes with different loudness and spectral distributions were recorded in Zagreb (capital of Croatia) and reproduced to two groups of listeners while they were performing a concentration demanding task – a simplified variation of the memory game. These two groups of test subjects listened to the same soundscapes but with different loudness distribution.…
Read MoreDesign of smart chess board that can predict the next position based on FPGA
The abilities of human brain to discover solutions for many problems is a great gift that motivate the scientists to develop the revolution of the artificial intelligence and using it in many areas. This paper proposed an intelligent chessboard which works in a way that similar to the human brain that predicts the next positions…
Read MoreVertical Accuracy Assessment of DSM from TerraSAR-X and DTM from Aerial Photogrammetry on Paddy Fields – Karawang, Indonesia
A Digital Terrain Model (DTM) is a digital model representing the earth ‘s surface topography in three dimensions (3D) while a Digital Surface Model (DSM) represents the whole terrain including the objects on it such as trees and buildings. DTMs can be created through stereo-plotting. The advantage of this method is that the 3D data…
Read MoreSupporting Active Aging Through A Home Automation Infrastructure for Social Internet of Things
The number of smart devices inside the living environments grows more and more every day, and with it the need to interface them in order to share data and activate functions. Each day, new scenarios and new applications emerge to make our lives easier in many different contexts. The AAL SOCIALIZE project aims to create…
Read MoreAcoustic Signal Processing and Noise Characterization Theory via Energy Conversion in a PV Solar Wall Device with Ventilation through a Room
Noise defined as ‘a sensation of unwanted intensity of a wave’, is perception of a pollutant and a type of environmental stressor. The unwanted intensity of a wave is a propagation of noise due to transmission of waves (viz. physical agents) such as light, sound, heat, electricity, fluid and fire. The characterization of noise interference,…
Read MoreEffectiveness of Routing Protocols for Different Networking Scenarios
Selection of a routing protocol is vital for modern arena of Internet communication as network traffic and network complexities are rapidly increasing. This paper evaluates the effectiveness of three routing protocols namely routing information protocol version 2 (RIPv2), open shortest path first (OSPF), enhanced interior gateway routing protocol (EIGRP), and hybrid protocols based on these…
Read MoreDc-link voltage drift compensation in a four level Double- Star Converter using redundant states via phase-shifted PWM strategy
The following work introduces the use of the available Redundant switching states introduced by the double star four level converter topology, for its application in a medium voltage variable speed drive under a wide range of operation loads. Redundant switching states are obtained using multi-carrier phase-shifted pulse width modulation (PWM) strategy. The converter performance is…
Read MoreDirect Torque Control of Multiphase Doubly Converter-fed Asynchronous Machines Incorporating the Harmonic Torques
Doubly fed asynchronous machines have an outstanding property: they can be operated up to twice rated speed delivering full rated torque. This paper presents, for the first time in the literature, a control system for multiphase asynchronous machines fed by Voltage Source Inverters (VSIs) both in stator and rotor that incorporates the harmonic torques. The…
Read MoreStream Cipher by Reed-Solomon Codes
Stream cipher can be used in constrained environments to provide information security and reduce energy expense at data transmission. In this paper, it is shown that Reed-Solomon (RS) code can be used to implement stream cipher, which is widely used for error corrections of data in transmission and storages. The proposed stream cipher combines the…
Read MoreScientific Principles behind 2017 World Universiade of Safety Lantern and Torch
The torch relay for the 2017 Taipei Summer Universiade started June. The innovative torch design was altered and tested, follow-up production successfully. For preventing weather effect, the head of the torch embedded with a unique airflow structure that allowed the sacred flame to pass the wind and rain tests. The safety lantern displays a 3D…
Read MoreSimulation Strategy to Enhance Oxygen Uptake and Reaction Forces at Leg Joints and Vertebral Bodies During Ergometer Exercise Under Altered Gravity
Moderate exercise has been implemented in spaceflight programs to prevent muscle and joint damage under extreme circumstances such as microgravity. Although the physical effects of exercise have been investigated experimentally, advanced modeling and simulation techniques are powerful tools that could provide insight into the physical limitations, optimal conditions, and mechanisms that might lead to muscle…
Read MoreExperimental Software Solution for Estimation of Human Body Height using Homography and Vanishing point(s)
The principal goal of this paper is the development of the experimental software solution for the extraction of dimensional unit from the uncalibrated image. Existing techniques are analyzed and also partially utilized in presented approach as an aid in the extraction process. The design of two different approaches was proposed, these were later implemented and…
Read MoreLearning Personalization Based on Learning Style instruments
Adaptive education systems (AES) are considered one of the most interesting research topics in technology-based learning strategies. Since students have different abilities, needs and learning styles, we should fit the curriculum and teaching activities to these different learning styles. This study investigates the impact of using LAES (Libyan Adaptive Education System) on the performance of…
Read MoreWeight Parameters and Green Tea Effect; A Review
The objective was to review and add literature whether green tea is helpful for weight reduction. Reviewing the randomized, double-blind, placebo-controlled trials to compare green tea extracts for weight loss from various online sources including Ovid MEDLINE, PubMed, and Cochrane databases studies published in 2006, 2007 and 2008 in English language were considered. In each…
Read MoreEffect of Risperidone with Ondansetron to Control the Negative and Depressive Symptoms in Schizophrenia
To evaluate the effects of Ondansetron on the negative and depressive symptoms of patients with schizophrenia. A double-blind randomized control trial was conducted in 2016-17 in Lahore. 30 participants were included both in placebo and medicine group. The patients were assessed by using the Positive and Negative Syndrome Scale (PANSS) and Hamilton’s Rating Scale for…
Read MoreTowards Process Standardization for Requirements Analysis of Agent-Based Systems
The development of agent-based systems is negatively impacted by the lack of process standardization across the major development phases, such as the requirements analysis phase. This issue creates a key barrier for agent technology stockholders regarding comprehending and analyzing complexity associated with these systems specifications. Instead, such fundamental low-level infrastructure is loosely attended to in…
Read MoreRevealing Strengths, Weaknesses and Prospects of Intelligent Collaborative e-Learning Systems
The rapid evolution of Collaborative e-Learning Systems migrates to the use of new technologies such the artificial intelligence (AI). In this context, the role of AI in increasing the quality of learning and making it more productive, persistent and efficient. In addition, it can accomplish repetitive and complex tasks in record time and unmatched accuracy.…
Read More
