Face recognition in low resolution images has challenges in active research because face recognition is usually implemented in high resolution images (HR). In general, research leads to a combination of pre-processing and training models. Therefore, this study aims to classify low-resolution face images using a combination of pre-processing and deep learning. In addition, this study…

This paper provides an insight about the significance of the enterprise technical architecture (ETA) in enabling and supporting the implementation of the South African National Health Insurance (NHI). Design: Existing documentations from both academic and government domains were gathered, and analyzed using the hermeneutics technique, from the perspective of interpretivist approach. Based on the analysis,…

This paper uses the RC-triggered MOSFET-based electrostatic discharge (ESD) power clamp to conduct ESD from ESD events and not affect the ultra-low power sensor system. Then using the stacked device include stacked MOSFET or stacked BJT to reduce the leakage current which increases with temperature. Moreover, we compare gate-driven method and two-level–driven with both gate-driven…

In the Moroccan seismic code, infill walls are considered as secondary elements and their lateral strength and stiffness are neglected in the design when considering horizontal seismic loads. In this article we propose to investigate the effect of infill on the seismic performance of the buildings. A 6-stories reinforced concrete frame building is investigated. The…

As many digital documents are required in various environments, paper documents are digitized by scanner, fax, digital camera and specific software. In the case of a scanned document, we need to check whether the document is right sided or upside down because the orientation of the scanned document is determined by the orientation in which…

All trucks heading into the paper mill MONDI, Slovakia, have to pass an automatic security check. It controls if storage of its wood load meets all standards of safety. Each truck is scanned by a group of 2D scanners. After that the inspection of timber load is done by a software with use of the…

In the software engineering research, several works focus on advantages of multi-modeling, which facilitate modeling a system by separating of concerns. The Model Driven Engineering approach relies on model to design software artefacts during the software development lifecycle. Handling such models involves describing some model management operators like ‘ composition ‘. That is an operation…

The need for air conditioning in rural areas where there is no source of electricity, leads to look for alternative solutions. Usage of Solar thermal system drive vapor jet refrigeration cycle (VJRC) instead of the traditional air conditioning systems, contributes in the reduction of the Global Worming and Ozone Depletion. The main objective of this…

This study built and tested a research model to determine the determinants that impact students’ actual use of the learning management system. A survey questionnaire was used to gather data from 148 university students who used LMS in their course of study. The structural equation model was used to analyze quantitative data. The study revealed…

Object Instance Recognition aims to classify objects specifically and usually use a single reference image. It is possible to be used in many applications such as visual search, information retrieval and augmented reality. However, various things affect the appearance of the objects, which makes the recognition process harder, especially if a single reference image is…

Higher Education Institutions (HEIs) have begun rapidly adopting, selecting and implementing ERP systems due to the call by various governments to streamline their processes and practices. While ERPs are expanding at much faster rate, there is pressure on most HEIs to ensure quality. For quality model, ISO/IEC 25010 is an international standard for software and…

Jeju Island is the largest island of South Korea and has an independent electric supply system. The island has a special energy plan that realizes itself a carbon-free region by 2030. Wind and solar energy resources are considered as an important means. The introduction of weather-variable renewable energy generation sources into the electric power system…

We describe an efficient system-level simulator that, starting from the architecture of a well-specified transmissive medium (a channel modelled as single-ended or coupled differential microstrips plus cables) and including the system-level characteristics of transmitter and receiver (voltage swing, impedance, etc.), computes the eye diagram and the bit-error rate that is obtained in high-speed serial interfaces.…

Time-series is a sequence of observations that are taken sequentially over time. Modelling a system that generates a future value from past observations is considered as time-series forecasting system. Recurrent neural network is a machine learning method that is widely used in the prediction of future values. Due to variant improvements on recurrent neural networks,…

To supply a stable and efficient electricity, small-scaled wind turbine’s brake system plays an immense role in various wind speeds. Small-wind power generation systems are difficult to operate in strong wind region since the turbine could be over-rotated and damaged if the brake system is not robust enough to maintain a stable angular velocity. Most…

Dental plaque is considered a possible causative agent of major dental diseases. People must develop oral care skills at an early age with family support. This study aims to assist parents and to reduce children’s fear while cleaning their teeth. An interactive game challenges children’s brushing ability. Arduino modules and software platform was utilized to…

This paper presents a collaborative interaction model (CIAO) and several behaviour rules that could enhance brainstorming results. The model is composed of five elements which may be used during brainstorming sessions, consisting of activities performed by partici- pants which are characteristic of different modes of interaction. Some sequences of these interactions may be considered more…

This is era of new technology; most of information is collected from internet, web sites. Some people uses data from research papers, thesis, and website as it is and publish as their own research without giving proper acknowledgement. This term is known as plagiarism. There are two types of plagiarism detection methods, i) Extrinsic plagiarism…

The reformation of energy hubs has significantly augmented the apprehensions about the levels of dependency between different energy sources which often can also be discussed as independent systems conventionally. This research brings focus on the formulation and analysis of an integrated system with bi-directional energy conversions and its effects on the stability of the system…

In recent years, research has been conducted focused on the use of technologies in the classroom, but one of the main problems is to demonstrate that the use of this technology favors learning compared to traditional methods. One of these technologies is augmented reality that allows seeing virtual objects superimposed in the real world, but…

In recent years there has been technological growth in the field of facility location, considering it as a significant factor to achieve greater competition among companies. The present work gives a methodological solution for a territorial redesign in a Mexican automotive parts distribution company with the support of Geotechnological tools like Geographic Information Systems (GIS)…

Unreinforced masonry (URM) wall is one of the oldest types of walls used around the world. During earthquakes, URM walls present a real danger to life safety due to their behavior characterized by a brittle failure caused by their feeble shear resistance to in-plane loads, which make their strengthening necessary. Numerous studies had been used…

In this work, an integrated metamaterial filter design in close proximity with monopole antenna is proposed for vehicular communication applications. A cylindrical screen formed by an array of metamaterial cells is designed to be reflective at 5.9 GHz in order to enhance antenna performance in intelligent vehicle transport systems. The unit cell proposed design based…

Immersive output and natural input are two core aspects of a virtual reality experience. Current systems are frequently operated by a controller or gesture-based approach. However, these techniques are either very accurate but require an effort to learn, or very natural but miss haptic feedback for optimal precision. We transfer ubiquitous touch interaction with haptic…

Middleboxes like load balancers are being used by all the corporations to manage and support their infrastructures. These devices see a large amount of bandwidth every day. This might include a range of protocols which might be varying from network layer to the application layer. This traffic can be corrupt or malicious thus causing these…