Web services give a new view of the web as the biggest, widely accepted and the most straightforward distributed software platform. Their composition into applications and business processes is still a complex, non-trivial task, requiring highly rational efforts not only from the software developers, but from the quality assurance specialists. The provision if web service…

This paper describes a silicon carbide-field effect transistor (SiC-FET) gas sensor that is able to detect NO, O2, NH3, CO, and SO2. The gate of the sensor FET is a gas detection layer that consists of yttria-stabilized zirconia, nickel oxide, and platinum. The threshold voltages of the sensor depend on the target gas concentration, measurement…

The poultry house is the area where the chickens are maintained for the main purpose to improve the productivity and the environmental conditions for the broilers. The growth of chickens inside the poultry house can be affected by several criterions such as relative humidity and temperature. In this paper, we propose to design and implement…

Agriculture, being the vital sector, contributes to India’s GDP by 18%. It is necessary to enhance the production in this sector with minimal need of resources to get the good yield of crops. It in turn boosts up the necessity of automation in the field of agriculture. This paper discusses about the experimental study which…

Learning and mental and physical counselling for visually impaired children are important. However, due to the lack of visual sense assistance, Physical Activity will gradually degenerate without proper enhancement, which may require the care of others for life. Inner fear and sensitive psychological factors hinder the development of living ability. Strengthening physical activity of visually…

In our era, human and machine must share the same workspace in various plants such as warehouse logistics, material transportation, manufacturing factory or assisted human. The collaboration is essential to maintain the safe operation and the complete mission. In this paper, a design of anti-vibration scheme using Spline generator for grounded vehicle platform in human-machine…

This research aims to develop the methodology to assess effectiveness of distributed information systems (hereinafter IS). The effectiveness of information systems is reviewed along with their reliability. The article underlines the importance of reliability assessment for large geographically distributed systems. We suggest the approach based on the hierarchical presentation of reliability scheme that constitutes the…

VANET as a subclass of MANET is composed of a set of vehicles equipped with wireless transceivers, to build dynamic networks without the need of any pre-existing infrastructure. Over the last few decades, the area of routing protocols in VANETs has been extensively studied. Nevertheless, this area remains even more challenging due to some features…

The XBRL taxonomy has been proven to be able to restore various forms of redundancies and ambiguities in making financial reports from financial service institutions. However, the nature of XBRL which is oriented towards documents and based on XML makes the XBRL taxonomy difficult to use because the information cannot be directly read by ordinary…

This article develops the design and implementation of an industrial network for the control and supervision of the process of dispatching acetic acid, which aims to reduce the presence of this chemical in the environment, since the process is activated manually by the operators; what generates a lack of precision in several stages of the…

The greenhouse climate system is very hard to manipulate because the variables involved are closely correlated. This study aims to enhance the regulation performance of greenhouse climate system based on adaptive neural-fuzzy inference system (ANFIS). The ANFIS is a hybrid technique that incorporates the fuzzy logic theory and artificial neural network algorithms. The employed control…

Lean ERP system is considered among the new trends of systems in the manufacturing sector, it has become one of the most widely adopted systems, thanks to its various benefits such as: a centralized database which gathers all the data of the enterprise in a single database which is accessible to all the departments, reduction…

Recently, opportunistic networks are considered as one of the most attractive developments of ad hoc mobile networks (MANETs) that have emerged thanks to the development of intelligent devices. Due to the mobility-related instability of the paths between nodes and due to the limited buffer and energy resources, the ultimate objective of routing protocols in opportunistic…

Treatment plants have been developed in many countries to handle wastewater, therefore, many pieces of researches have been conducted in order to optimize the outcomes. In this article, a mathematical optimization model was developed using quadratic programming approach to optimize the pollutant degradation at the domestic wastewater facultative stabilization ponds. The data used in this…

In this paper an offline motion-planning algorithm is presented for robotic manipulators. In this method to solve the path-planning task, the Transition-based Rapidly-exploring Random Tree (T-RRT) algorithm was applied, that requires a cost-function over the search space. The goal of this cost-function is to keep distance between the actual position and configurations that cause collisions.…

With increasing photovoltaic (PV) penetration on distribution feeders, voltage functions is always a challenge. To control these variations due to the intermittent nature of PV generation,many utility companies use the traditional voltage regulating devices such as ON/OFF load tap changers, voltage regulators, switched capacitor banks and reactors. The use of smart inverters (SI) has been…

This article presents the development of an automatism by means of a Programmable Logic Controller (PLC), for the Fire System of an Electric Substation; For this, the areas belonging to the electrical substation are initially described, where the automatism is developed, these being three; Patio area (Transformer location), Distribution board area and Control room. Then…

Over the past decades, huge efforts have been devoted for image enhancement under uncontrolled scene such as fog and haze. This work proposes Multi-stage de-hazing approach for improving the quality of hazy images. Four main stages are introduced, in our approach, to achieve an automated, efficient and robust de-hazy processing. The first two stages are…

The present paper details a queueing model with two kinds of repair facilities and server timeout. Here the customer arrives in compound Poisson process into the system and the lifetime of the server follows exponential distribution. At the point when the system is vacant, the server waits for customers for a settled time ‘c’. If…

In recent years, development of aerial autonomous systems and cameras have allowed increasing enormously the number of aerial images, and their applications in many research areas. One of the most common applications is the mosaicking of images to improve the analysis by getting representations of larger areas with high spatial resolution. This paper describes a…

This work implements a MIMO (Multiple Input Multiple Output) FO (Fractional Order) control system for controlling the level and temperature of the water inside a tank by means of two inflow rates: cold and hot water, which are mixed to produce an outflow rate. Such a process exhibits coupling between inputs and outputs. A linear…

This research aimed at developing a method of glaze material making from used glass bottle waste combined with kaolin. Then, the microstructure and hardness level of glaze products were characterized. Furnace heaters were used in research to heat glaze material by varying the holding time of 30, 45 and 60 minutes. The composition of glaze…

Nowadays the collaboration of organizations, systems or services becomes more and more answered in practice. Indeed, organizations try to expand their service, other to satisfy the needs of their customers. Thus, the need to work collaboratively with other partners whether internally or externally becomes trivial. However, process modeling in a collaborative environment becomes heavy because…

A fuzzy system is a rule-based system that uses human experts’ knowledge to make a particular decision, while fuzzy modeling refers to the identification process of the fuzzy parameters. To generate the fuzzy parameters automatically, an optimization method is needed. One of the suitable methods provides the Firefly Algorithm (FA). FA is a nature-inspired algorithm…

Content Based Image Retrieval (CBIR) for remote sensing image data is a tedious process due to high resolution and complexity of image interpretation. Development of feature extraction technique is a major portion to represent the image content in an optimal way. In this paper, we propose a feature descriptor which combines the color coherent pixel…