This study investigated thermoelectric cooling system performances to cool the water flowing inside a water block. The experiments employed two identical thermoelectrics model TEC2-25408 with an overall dimension of 40 mm x 40 mm x 6.4 mm. The cold side of the thermoelectric was affixed to the top surface of the water block, while the…

This paper presents the use of Electromagnetic simulation tools such as ADS and CST in order to practice designing the RF front-end transceiver for a continuous-wave radar. Teaching the microwave engineering course based on the conventional education methods results in students who may not be able to apply their theoretical knowledge to design the microwave…

In this work of technological development and research is presented the work done in the ITSAO to contribute to the use of clean energy such as photovoltaics and the implementation of activities to reduce electricity consumption by the technological community, the monitoring of electricity consumption is made on a monthly basis and an annual report…

Research is dedicated to fuzzy reconstructions in the diachronic associative linguistics, and encompasses several simulation practices. The principles of an associative memory model and fuzzy computing with words are adopted in the working methodology. The evolved mathematical model reanimates the older patterns of Scottish associative map by means of fuzzy logic. The compiled fuzzy associative…

Manufacturing System (MS) sizing is a crucial task to complete in order to obtain the desired MS performance and efficiency. It involves selecting the required number of resources from each used type in a given planning horizon. In fact, different approaches coupling simulation/optimization tools have been developed to solve this issue and evaluate the MS…

This research focussed on assessing the impact of using upgraded biogas from chicken waste on the performance of a gasoline generator. In the study, the characteristics of raw biogas were determined and a biogas upgrading device was developed before assessing the generator performance on upgraded biogas. A Geotech GA 2000 plus gas analyser was used…

This paper is an extension of research work originally presented in 2018 IEEE fifth International Congress on Information Science and Technology (CiSt). The research consists on developing method to diagnose electrical defects affecting wind turbine doubly-fed induction generator DFIG which constitutes a crucial part of wind energy conversion chain. First off all, we create a…

Plants are living organisms that can hear and recognize the environment around them but cannot communicate to inform their needs. Thus, in the past, humans thought that it was impossible to communicate with plants. However, in this modern era, humans can be able to communicate with these plants. In this paper, we propose a model…

The Universidad Nacional Tecnologica de Lima Sur (UNTELS), like all universities, has as one of its objectives the training of professionals with skills that the changing working world requires. One way to establish the relevance of what UNTELS offers to its students is to know relevant information from graduates that entails, to their authorities, establish…

Trade credit is an important cost reduction tool in the inventory management. The effect of trade credit is studied on the integrated system for sharing the cost benefits realized due to the permissible delay. Credit term factor is introduced to divide the cost benefits between the retailer and the supplier. The various costs in the…

Physical computing is important for ICT (information and communication technology) Education and other informatics education such as software education since physical computing can provide learning-by-doing education for students. It is also a strong tool to increase students’ programming ability using various type of physical computing tools like a robot. In physical computing, it is necessary…

In this paper, we present a new Somewhat Homomorphic Encryption (SHE) scheme using computation over complex numbers. We then use Bootstrapping technique to make the scheme Fully Homomorphic (FH) and supports unbounded number of circuit depth. In addition to its homomorphic properties and security level, a main characteristic of the proposed new scheme is its…

Current work demonstrates how open-source optimization library ”Extremum” (OSOL Extremum) can be used to build feedback controller of a satellite. Proposed software was developed to as an attempt to eliminate current problems that are present in scientific area: black-box effect (i.e. there is no opportunity to explore source code, modify it, or simply verify), no…

All forms of skin cancer are becoming widespread. These forms of cancer, and melanoma in particular, are insidious and aggressive and if not treated promptly can be lethal to humans. Effective treatment of skin lesions depends strongly on the timeliness of the diagnosis: for this reason, artificial vision systems are required to play a crucial…

The problem of recognizing traffic sign boards in a correct fashion is one of the major challenges since there is an alarming rate of increase in the number of road accidents happening because of incorrect interpretation of traffic sign boards in bad weather conditions. In this paper, a comparative analysis of various noise removal techniques…

Modern universities aim at carrying capacity human resources component in its tri dharma (Three Pillars of Higher Education). UPI with sufficient conditions in the management of several resources has undoubtedly tried to establish itself as a modern university. The superior human resource support in every competition and the university’s tri dharma is the primary resource…

Metals of lead and some lead alloys, lead oxide, nickel and cobalt were recovered from exhausted battery by combined hydrometallurgy and pyro metallurgical method. The spent batteries were dismantled and leached in hot 2M and 5M nitric acid. The unleached fraction was heated with sodium carbonate to produce lead oxide. Salts in the leached solution…

The integrating model becomes one of key trends in engineering design. The more the product has functional specifications, the more the industrial consumer apply in many fields. In this paper, a fusion design of architecture platform for autonomous system is demonstrated. It is greater due to combining the specifications of various types in commercial market…

In this work, kaolin powder was filled in PP/LDPE blend as the filler with the amount from 0 to 14 wt%. The ratio of PP/LDPE was fixed as 50/50 in all the experiments. The tensile strength, impact strength, and hardness were investigated in according with ASTM. The results showed that the tensile strength of PP/LDPE…

An artificial neural network (ANN) computing system can be significantly influenced by its implementation type. The software implemented ANN can produce high accuracy output with slow computation time performance compared to hardware implemented ANN which runs at a faster computation time but with low accuracy. Normally, software implementation reduces the proficiency and efficiency of the…

The purpose of this study was to investigate the impact of the implementation of the Online Appointment Scheduling system and Pharm Partner system technologies on the quality of working life for users in a small healthcare environment at the University of Technology, Jamaica. Both qualitative and quantitative methods were employed. Two data collection instruments were:…

High gain-bandwidth product and visible/UV contrast photodetectors are vital in Visible Light Communication (VLC) and Ultraviolet (UV) reflectance imaging applications respectively. We adopt material and structural optimization to perceive such photodetectors with back-illuminated Optical Field Effect Transistor (OPFET) wherein any potential difference in absorption coefficient of the semiconductor material between the visible and the UV…

While the Kalman filter, including its many variants, has been the staple of the tracking community, it also has been shown to have drawbacks, particularly when tracking through a maneuver. The most common issue is a lag in the position of the target track compared to the true target position as the target performs its…

To reduce its high last mile logistics cost, a company may explore different options such as a horizontal collaboration with another company that has a similar logistics requirement. Traditionally, the collaboration can be conducted through an outsource contract mechanism where the company may need to guarantee a certain number of logistics demands or usage for…

Traditionally bathymetry survey is generally carried out using boat, research vessel, and small craft which is equipped with the echo sounding instrument and involves many persons as the vessel crew. The survey method demands an additional cost because of the extra man power and an expensive vessel operational cost. An autonomous surface vehicle (ASV) which…