Search Results

Sales behavior and the technical development of products influence their fabrication. As market influences become increasingly volatile and unpredictable, factories will have to adapt their manufacturing to market trends even more in the future. Adaptation is referred to as convertibility and can be achieved, among other things, by mobile and intercompatible machines. Enabling machines to…

NOX and SO2 gas pollution have a direct impact on health problems and environmental damage. Therefore, to map the emission patterns and predict the resulting impacts, complete data and information on emissions of the two pollutants are needed. In Indonesia, data on NOX and SO2 emissions that are recorded over a long period of time…

Enrolment figures have been expanding in South African institutions of higher-learning, however, the expansion has not been accompanied by a proportional increase in the percent- age of enrolled learners completing their degrees. In a recent undergraduate-cohort-studies report, the DHET highlight the low percentage of students completing their degrees in the allotted time, having remained between…

Background: Occupational injuries are an issue of huge significance in the United States. After a work injury, health care providers often utilize functional capacity evaluations to determine readiness of a patient to return to work. However, it can be difficult to determine if a patient is providing maximal “effort” during the evaluation. The aim of…

The Internet of Things (IoT) is a technology that enables communication between everyday life using different sensor actuators that work together to identify, capture, and distribute critical data from the planet. Massive machines and devices are therefore linked and communicate with them. The use of resources in this area presents new challenges for this technology.…

Virtual reality is a technology that literally allows constructing of a new reality for its users. VR has huge potential, it is able to change social life, communications, and the academic sphere, but VR may also be applied by criminals. In the present paper properties of potentially committed crimes in VR are analyzed. It is…

COVID-19 is a viral disease that became a pandemic representing a very great challenge worldwide. The purpose of this article is to analyze COVID-19 patients’ data based on time- to-event analysis and identify the factors that affect the recovery time from COVID-19. The datasets that are used in this study are for cases that are…

The world is witnessing unprecedented advancements in ICT (Information & Communication Technology) related fields. These advancements are further boosted with the emergence of big data. It goes without saying that big data requires two major operations: storage and processing. The latter is usually provided through High-Performance Computing (HPC) which is delivered through two main venues:…

With the features of the application system make it easier for users to transact, make the user feel comfortable in using the application system. The problem is that the intensity of application usage decreases judging by the application rating given by the user each time they perform a transaction, this is because the company initially…

The adoption and diffusion of mobile applications (mobile apps) has become the base of modern activities in Africa owing to the services and values that are obtained through mobile apps innovations. More emphasis has been on the development of mobile apps whereas the adoption and diffusion process as well as their predictors are ignored or…

Biological networks represent biological systems, and various graph analysis algorithms have been applied to solve various real-world problems. Network motif analysis, as one of network analyses, is detecting frequently and uniquely over-occurring subgraph patterns in a network. The detection process requires high computational resources, and various tools have been developed to provide efficient solutions. However,…

In this paper, the investigated results on tool wear in milling process of a Gleason spiral bevel gear was investigated. The CVD Ti (C, N)-Al2O3-TiN coated carbide inserts were used in the experimental process. The cutting inserts clamped on the tool head of Gleason tool head system. The workpiece material that was used in this…

Gender detection and age estimation become an active research area and a very important field today, wish has been widely used in various applications including them: biometrics, social network, Targeted advertising, access control, human-computer interaction, electronic customer, etc. The need to further improve the recognition or classification rate keeps increasing day after day. In this…

Interpolation tools are used daily in hydrology and climatology. With the purpose to regionalize spot´s registration parameters, such as depth of precipitation, temperature, humidity, among others. The accuracy of these methods is not fully validated. This research presents a comparative study between the most used interpolation methods for the regionalization of hydrological and climatological parameters.…

The emergence of the COVID-19 pandemic earlier this year destabilised the operations in the education sector, particularly in institutions of higher learning. Most of these institutions are now expected to teach online, assess their students using non-venue examinations and offer remote laboratory practical and experiments. However, many of these institutions were not prepared for such…

Forecasting the occurrence and development of thunderstorms near insured mobile objects, such as aircraft carriers, oil tankers, requires the usage of appropriate single-point monitoring systems (SPMS) of thunderstorm activity. These systems must be small and included in the equipment of the objects. A SPMS based on EH location finder meets the requirements of small dimensions.…

Many recent studies on autonomous driving have focused on model-based control. A number of studies has addressed that simple models such as the Kinematic Bicycle Model are easier to design controls for autonomous driving systems. However, such a simple vehicle model has a weakness in that it is subject to modeling errors. This is because…

Introduction: Burnout is a real malaise that affects the mental health of teachers. The objective is to determine the prevalence of burnout among primary school teachers in the Wazzane region and to look for associated risk factors. Methods: Descriptive cross-sectional study conducted in 2017- 2018 with a sample of 330 teachers. Socio-demographic and work-related data…

The world is facing an unprecedented virus outbreak, COVID-19, hitting more than 200 countries. Governments have been striving to prevent the spread of the virus through the lockdown. During the strict lockdown in Jordan, people needed to stay home, and they used available social networks to keep updated on COVID-19, with Facebook, the most popular…

The fight against poverty in the Peruvian Andes is a complex task in which various professionals, such as engineers, economists, anthropologists, among others, participate. The uncertainty of the decisions taken today, no matter how appropriate they may seem, such as million-dollar investments in irrigation infrastructure, can result in over-production and, therefore, in economic recessions. For…

Sign language is a form of communication language designed to link a deaf-mute person to the world. To express an idea it requires the use of hand gestures and body movement. However, the bulk of the general population remain uneducated to understand the sign language. Therefore, a translator is required to facilitate the communication. This…

This paper presents an integrated solution for a fault-tolerant three-phase permanent magnet synchronous motor (PMSM) field-oriented control drive subjected to an open-phase fault (OPF) integrated with effective fault-tolerant detection methodology. The fault detection methodology is based on model predictive current control (MPCC), which is easy to apply, detect OPF in a range of microseconds, and…

The article describes a way to increase the efficiency of an abrasive tool by its impregnation in an aqueous solution of chromium diiodide. The device scheme for impregnating the instrument is proposed. Research results of durability of tools impregnated with chromium diiodide and structural condition of material of a surface layer of details after processing…

Text classification is considered one of the most fundamental and essential problems that deal with automatically classifying textual resources into pre-defined categories. Numerous algorithms, datasets, and evaluation measurements have been proposed to address the task. Within the era of information redundancy, it is challenging and time-consuming to engineering a sizable amount of data in multi-languages…

This paper is an extension of work originally presented in PM2.5 Prediction-based Weather Forecast Information and Missingness Challenges: A Case Study Industrial and Metropolis Areas, which focused on imputation algorithm to solve missingness challenge and demonstrated a basic prediction system to prove the proposed algorithm, II-MPA. Distributed and decentralized systems, recently, have been proven for…