Search Results

Results (17)

Search Parameters:

Section: eev
Order results
Results per page
Open AccessArticle
7 Pages, 1,549 KB Download PDF

Driver Fatigue Tracking and Detection Method Based on OpenMV

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 3, Page # 296–302, 2021; DOI: 10.25046/aj060333
Abstract:

Aiming at the problem of fatigue driving, this paper proposed a driver fatigue tracking and detection method combined with OpenMV. OpenMV is used for image acquisition, and the Dlib feature point model is used to locate the detected driver’s face. The aspect ratio of eyes is calculated to judge the opening and closing of eyes,…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
9 Pages, 637 KB Download PDF

Framework for Decentralizing Municipal Solid Waste Management in Harare, Zimbabwe

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 2, Page # 1029–1037, 2021; DOI: 10.25046/aj0602117
Abstract:

Municipal Solid Waste Management (MSWM) decentralisation brings about reductions in the amount of municipal solid waste (MSW) earmarked for landfilling worse still under situations where MSW is being sent to dumpsites. It also reduces the distances MSW collection vehicles travel during MSW collection, maintenance and transport costs due to the establishment of local level decentralised…

Read More
(This article belongs to the SP10 (Special Issue on Multidisciplinary Sciences and Engineering 2020-21) & Section Environmental Engineering (EEV))
Open AccessArticle
11 Pages, 898 KB Download PDF

Assessment of the Municipal Solid Waste Transfer Stations Suitability in Harare, Zimbabwe

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 2, Page # 1002–1012, 2021; DOI: 10.25046/aj0602115
Abstract:

The suitability of incorporating waste transfer stations (WTS) in likely future Municipal Solid Waste Management (MSWM) systems for Harare city and neighbouring urban centres was assessed under this study. WTS will bring about location of landfills and other MSWM facilities further away from population centres, increasing recycling, reducing waste collection costs and burden on the…

Read More
(This article belongs to the SP10 (Special Issue on Multidisciplinary Sciences and Engineering 2020-21) & Section Environmental Engineering (EEV))
Open AccessArticle
5 Pages, 993 KB Download PDF

Study of Thermo-Physical Characteristics and Drying of Araucaria Wood from the City of El Jadida, Morocco

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 2, Page # 274–278, 2021; DOI: 10.25046/aj060231
Abstract:

The aim of this study is, on the one hand learn about this type of wood, and on the other hand, is to study the processes the thermophysical characterization of araucaria wood from the city of el Jadida, Morocco, and on the other hand, will study the processes related to evaporation. Wood is defined industrially…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
12 Pages, 1,065 KB Download PDF

Model of Fish Cannery Supply Chain Integrating Environmental Constraints (AHP and TOPSIS)

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 1, Page # 798–809, 2021; DOI: 10.25046/aj060189
Abstract:

This paper proposes a modeling framework (analytical modeling) for the case of fish cannery supply chain (FCSC) to optimize the environmental impact of the set of its processes; indeed, for our knowledge, there were few studies attempting to address this case study as a model of green supply chain. Implementation of the proposed model is…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
8 Pages, 2,309 KB Download PDF

Auditing the Siting of Petrol Stations in the City of Douala, Cameroon: Do they Fulfil the Necessary Regulatory Requirements?

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 1, Page # 493–500, 2021; DOI: 10.25046/aj060154
Abstract:

No other form of technological development had negatively skewed from existing regulations as the siting of petrol filing stations. An audit of the degree to which their operators repeatedly violate the rules regulating their location and operations may encourage the legislature to pass laws that can ensure a balance between the economy and the environment.…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
7 Pages, 823 KB Download PDF

Optimizing the Wind Farm Layout for Minimizing the Wake Losses

Advances in Science, Technology and Engineering Systems Journal, Volume 6, Issue 1, Page # 309–315, 2021; DOI: 10.25046/aj060135
Abstract:

The development of wind farms requires an optimal design of wind turbines layout. The main goal of this optimization is to minimize the wake effect through the optimal placement of the wind turbines. The current study aims to standardize the wake losses among all wind turbines in the wind farm and bringing their losses to…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
6 Pages, 703 KB Download PDF

Impact of Salinity on Stabilized Leachate Treatment from Ozonation Process

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 6, Page # 1511–1516, 2020; DOI: 10.25046/aj0506181
Abstract:

Leachate generated from landfill Indonesia is typical has high salinity and organic matters during the dry season, potentially contaminating water and the environment. An increase in salinity might deteriorate the activity of the microorganisms on the decomposition process. This research aims to study the feasibility of the ozonation technique for treating stabilized leachate. The parameters…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
6 Pages, 1,029 KB Download PDF

Evaluation of Simple Space Interpolation Methods for the Depth of Precipitation: Application for Boyacá, Colombia

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 6, Page # 1322–1327, 2020; DOI: 10.25046/aj0506157
Abstract:

Interpolation tools are used daily in hydrology and climatology. With the purpose to regionalize spot´s registration parameters, such as depth of precipitation, temperature, humidity, among others. The accuracy of these methods is not fully validated. This research presents a comparative study between the most used interpolation methods for the regionalization of hydrological and climatological parameters.…

Read More
(This article belongs to the SP9 (Special Issue on Multidisciplinary Innovation in Engineering Science & Technology 2020) & Section Environmental Engineering (EEV))
Open AccessArticle
8 Pages, 1,214 KB Download PDF

Water Availability for a Self-Sufficient Water Supply: A Case Study of the Pesanggrahan River, DKI Jakarta, Indonesia

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 5, Page # 348–355, 2020; DOI: 10.25046/aj050543
Abstract:

The research will explore the challenges of using local water sources inside the city for a self-sufficient urban water supply by developed a system dynamics model. This study aims to evaluate and understand the Pesanggrahan River appropriateness as a raw drinking water source through a conceptual model that can accurately represent the interactions between the…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
8 Pages, 805 KB Download PDF

Design of Aerial Panoramic Photography: Contrast between Industrialized and Natural Zones

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 4, Page # 849–856, 2020; DOI: 10.25046/aj050499
Abstract:

This study utilized aerial panoramic photography and 3D virtual reality to demonstrate the environmental changing issues. Environmental problems have occurred in the surroundings for a long time, but the public has gradually become numb. The wide view through aerial photography helps to show the difference. The proposed self-assembled drone equipped with an antishock bracket containing…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
8 Pages, 1,633 KB Download PDF

Potential of Solar Energy in Residential Rooftop Surface Area in Semarang City, Indonesia

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 4, Page # 397–404, 2020; DOI: 10.25046/aj050446
Abstract:

This study examines the potential of solar energy in the urban environment with a case study in Semarang, Indonesia by analyzing the intensity of solar radiation and the residential rooftop area. The study aims to obtain a quantitative description of the potential for electricity production from rooftop solar photovoltaic systems in residential areas and estimate…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
14 Pages, 1,641 KB Download PDF

Coastal Risk Modelling for Oil Spill in the Mediterranean Sea

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 4, Page # 273–286, 2020; DOI: 10.25046/aj050434
Abstract:

The accident probability estimation and the consequence analysis are based on statistical data about oil spill accident occurrence in the Mediterranean area, on the probability of different release sizes, and on the joint probability of wind speed and directions. The risk model and its evaluation have been assessed for the Mediterranean littoral considering the time…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
5 Pages, 809 KB Download PDF

Parameter Estimation on Two-Dimensional Advection-Dispersion Model of Biological Oxygen Demand in Facultative Waste Water Stabilization Pond: Case Study at Sewon Wastewater Treatment Facility

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 3, Page # 11–15, 2020; DOI: 10.25046/aj050302
Abstract:

To build a precise mathematical model describing a natural phenomenon, parameter estimation is needed to achieve the best parameter value. In this paper, we have calculated the best parameter value for a two-dimensional advection-dispersion differential equation of the biological oxygen demand degradation process in a facultative wastewater stabilization pond. This research was conducted with case…

Read More
(This article belongs to Section Environmental Engineering (EEV))
Open AccessArticle
8 Pages, 1,934 KB Download PDF

An Algorithm to Improve Data Accuracy of PMs Concentration Measured with IoT Devices

Advances in Science, Technology and Engineering Systems Journal, Volume 5, Issue 2, Page # 180–187, 2020; DOI: 10.25046/aj050223
Abstract:

Air pollution is responsible for increased morbidity and mortality due to respiratory problems mainly caused by long term exposure. Although the emissions of principal air pollutants are highly regulated, there is a lack of information about the real extent of personal exposure for an accurate health impact assessment. To tackle these challenges, local air pollution…

Read More
(This article belongs to the SP8 (Special Issue on Multidisciplinary Sciences and Engineering 2019-20) & Section Environmental Engineering (EEV))
Open AccessArticle
5 Pages, 1,524 KB Download PDF

Applying Machine Learning and High Performance Computing to Water Quality Assessment and Prediction

Advances in Science, Technology and Engineering Systems Journal, Volume 2, Issue 6, Page # 285–289, 2017; DOI: 10.25046/aj020635
Abstract:

Water quality assessment and prediction is a more and more important issue. Traditional ways either take lots of time or they can only do assessments. In this research, by applying machine learning algorithm to a long period time of water attributes’ data; we can generate a decision tree so that it can predict the future…

Read More
(This article belongs to the SP4 (Special issue on Advancement in Engineering Technology 2017-18) & Section Environmental Engineering (EEV))
Open AccessArticle
5 Pages, 1,126 KB Download PDF

Effect of Ambient Temperature Variations on Particle Dimesions in Ultrasonic Nebulizers during Cold Vaporization

Advances in Science, Technology and Engineering Systems Journal, Volume 2, Issue 3, Page # 946–950, 2017; DOI: 10.25046/aj0203119
Abstract:

For human comfort and convenience, appropriate temperature values may not be sufficient enough for the environment that they live in. The moisture content of the air has an important place in this regard. 30% to 65% humidity is desireable for a relaxed and comfortable life. Humidity in the environment is fundamental for the human health,…

Read More
(This article belongs to the SP3 (Special issue on Recent Advances in Engineering Systems 2017) & Section Environmental Engineering (EEV))

Journal Menu

Journal Browser


Special Issues

Special Issue on Digital Frontiers of Entrepreneurship: Integrating AI, Gender Equity, and Sustainable Futures
Guest Editors: Dr. Muhammad Nawaz Tunio, Dr. Aamir Rashid, Dr. Imamuddin Khoso
Deadline: 30 May 2026

Special Issue on Sustainable Technologies for a Resilient Future
Guest Editors: Dr. Debasis Mitra, Dr. Sourav Chattaraj, Dr. Addisu Assefa
Deadline: 30 April 2026