Results (7)
Search Parameters:
Section: pls
Effect of Starch Oxidation Degree on the Properties of Hydrogels from Dialdehyde Starch and Polyvinyl Alcohol
Starches have been applied as biomaterials due to their wide availability and biocompatibility. These have also been modified by oxidation, resulting in dialdehyde starch (DAS), to improve their stability in water and mechanical properties. Cassava starch with a low oxidation degree has been introduced into hydrogels based on polyvinyl alcohol (PVA) to improve their properties.…
Read More Experimental Study on Mechanical Behavior of Polypropylene-based Blends with Talc Fillers
In this report, polymeric composites made from Polypropylene (PP) and talc powder were studied. The talc powder with different portions of 10%, 20%, 30% by weight was used to create samples. The samples were examined by the tensile test and the flexural test according to ASTM D638 and ASTM D790. The surface morphology of the…
Read More Fabrication and Properties of Hybrid Membranes Based on Poly (Vinyl Alcohol), Sulfosuccinic Acid and Salts of Heteropolyacid with or without Silica for Fuel Cells Applications
Novel ionic polymers were synthesized by crosslinking of poly (vinylalcohol) (PVA) with sulfosuccinic acid (SSA) and silicotungstic acid (SiWA) with or without silica. The polymer electrolyte membrane fuel cell (PEMFC) was developed using solution casting method. Infrared (IR) spectra revealed that the Keggin structure was insered in the PVA films. The thermal decomposition of the…
Read More Mechanical Behaviors of Kaolin Powder Filler Polypropylene/Low Density Polyethylene Blends
In this work, kaolin powder was filled in PP/LDPE blend as the filler with the amount from 0 to 14 wt%. The ratio of PP/LDPE was fixed as 50/50 in all the experiments. The tensile strength, impact strength, and hardness were investigated in according with ASTM. The results showed that the tensile strength of PP/LDPE…
Read More Analysis of Fuzzy Data for the Selection of Ingredients of the Polymer Composition by Technical Functions in Quality Management
The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…
Read More Numerical Simulation of One Pavement Structure of Polyethylene Terephthalate Submitted to Static Point Loads
Plastic is highly polluting nowadays and is found in many disposable elements used for people. Plastic materials are disposed inadequately and large quantities of them become pollution in the ground, water, and air, affecting plants and animals. Most of the plastic is Polyethylene Terephthalate (PET) which is used in many activities. Resistance, support capacity, and…
Read More Designing Experiments: 3 Level Full Factorial Design and Variation of Processing Parameters Methods for Polymer Colors
In this work, we investigate the effects of variation of processing parameters on the quality of dispersion of polycarbonate compound. In order to achieve appropriate pigments dispersion, we performed compounding process parameters optimizations, by investigating three processing parameters, temperature, screw speed, and feed rate. We utilized experimental design for the optimization of process parameters based…
Read More