Results (1649)
Search Parameters:
Keyword: POSAn Operational Responsibility and Task Monitoring Method: A Data Breach Case Study
As a result of digitalization, services become highly dependent on information systems thus increasing the criticality of security management. However, with system complexity and the involvement of more human resources, it becomes more arduous to monitor and track tasks and responsibilities. This creates a lack of visibility hindering decision making. To support operational monitoring, we…
Read MoreAllocation of Total Congestion Cost and load participation to Generators for a PoolCo Market in Deregulated Power System
The objective of this paper is to allocate transmission congestion cost to responsible generators using a novel method. Deregulation of the electrical power system leads to the compulsion of open access to the transmission system for all entities of the power system. There is a trend to utilize cheaper generators by all loads. This leads…
Read MoreArtificial Neural Network Approach using Mobile Agent for Localization in Wireless Sensor Networks
Wireless sensor networks (WSNs) are having large demands in enormous applications for the decade. The main issue in WSNs is estimating the exact location of unknown nodes. All applications are dependent on the location information of unknown nodes in WSNs. Location information of mobile anchor node is used to estimate the location of unknown nodes.…
Read MoreThe Performance of Project Teams Selected Based on Student Personality Types: A Longitudinal Study
The use of heuristic methods in teaching is not possible without the cooperation of all or part of the students’ academic group. That is, the teacher who made the decision to apply the heuristic method de facto solves the issues of organizing project method in teaching. There are a large number of indications on the…
Read MoreElectronically Tunable Triple-Input Single-Output Voltage-Mode Biquadratic Filter Implemented with Single Integrated Circuit Package
This article proposes a compact and simple design of electronically adjustable voltage-mode biquadratic filter using fundamental active cell implemented on a single integrated circuit (IC) package as LT1228. The proposed circuit having triple inputs and single output (TISO) employs namely one resistor and two capacitors as the passive components. All the five possible biquadratic filtering…
Read MoreInvestigation of the LoRa Transceiver in Conditions of Multipath Propagation of Radio Signals
The article presents some results of the research of the LoRa module. These modules can be the basis of possible IoT technologies are implementing, providing enough good range of receiving and transmitting messages. The SX1276 transceiver has been testing to determine the signal loss in the propagation channel. These experiments took in a highly-populated Kyiv…
Read MoreDesign of Platform to Support Workflow Continuity in Multi-Device Applications
Nowadays, the Internet has become an indispensable tool for the realization and continuity of activity at a different time, place, and technological context (e.g., mobile, pc, tablet), so that interaction techniques through the use of multi-device support have become of great interest. From this perspective, continuity in interactions is an essential concept in the face…
Read MorePrioritization of Sustainable Supply Chain Management Practices in an Automotive Elastomer Manufacturer in Thailand
Nowadays the sustainable awareness trend is increasing. The consumers’ attitude has changed, causing companies to pay more attention to management in a sustainable way. Effective sustainable supply chain management (SSCM) can increase social, economic, and environmental benefits. Important factors from literatures were gather and organized to be a framework for SSCM. The proposed framework incorporates…
Read MoreUsing a safety PLC to Implement the Safety Function
Nowadays almost every PLC manufacturer offer a so-called safety PLC. It is a specific category of PLC, which in recent years have become a commonly used means of performing safety functions, especially in industrial applications. In this area of specific applications, a maximum of SIL 3 is normally required. However, the guaranteed safety features of…
Read MoreModeling and Design of a Compact Metal Mountable Dual-band UHF RFID Tag Antenna with Open Bent Stub Feed for Transport and Logistics Fields
In this paper, we have modeled and designed a metal mountable tag antenna that is applied to cover two major UHF RFID bands, i.e., European (EU) (865-867 MHz) and U.S. bands (902-928 MHz). It is applied for many applications, especially in the transport and logistics fields. The tag antenna configuration utilizes microstrip configuration with open…
Read MoreSimulated IoT Based Sustainable Power System for Smart Agriculture Environments
In vital energy applications especially the agricultural environments, the service of adaptive power utilization plays an essential role in facilitating the usage of Internet of Things systems. Such environments are distinguished by the large range of lands where most of the region lacks the commercial power lines. Reaching some high or deep sensing points is…
Read MoreVariation in Self-Perception of Professional Competencies in Systems Engineering Students, due to the COVID -19 Pandemic
The objective of this article is to determine if the self-perception of professional competences has been affected, in systems engineering students, during the health emergency declared in Peru by Covid-19; The results will allow the public university of Peru to make corrective decisions and formulate proposals to improve the functioning of the variable under study.…
Read MoreUnderwater Computing Systems and Astronomy–Multi-Disciplinary Research Potential and Benefits
The Ocean plays an important role in hosting investigations in underwater astronomy and enabling the realization of new research prospects. This paper discusses synergistic prospects of the blue economy from the perspective of underwater astronomy and scientific inquiry, technological and economic development. The presented research investigates how the synergy enhances computing applications. The paper presents…
Read MoreOpen Energy Distribution System-Based on Photo-voltaic with Interconnected- Modified DC-Nanogrids
This manuscript exhibits a perfect design for a flexible number of modified DC nanogrids within an open energy distribution network (OEDN) that interconnected via a DC bus. Each modified nanogrid implies a single-input multi-output switched boost inverter (SIMO-SBI). The DC-output for each inverter is robustly controlled to keep the DC-bus interconnected voltage constant. The proposed…
Read MoreTransient Stability Enhancement of a Power System Considering Integration of FACT Controllers Through Network Structural Characteristics Theory
Modern power systems are topologically and structurally complicated due to their complex interconnections. Consequently, the complexity of the dynamic stability assessment be-comes more tedious, most especially, when considering a power electronics-based power system operating under faulty conditions. This paper, therefore suggests an alternative approach of Network Structural-Based Technique (NSBT) for the analysis and enhancement of…
Read MoreNon–Performing Loans’ Effect on the Loans’ Shrinkage in Albanian Banking Sector
The article investigated the banking determinants of loans’ growth using the quarterly data of Albanian banking sector during 2003-2018. We estimated the linear model of control variables to examine the bank’s sound effects on loan’s capacity. Empirical results demonstrated the initial positive outcome of the growth of non – performing loans on the loans’ growth,…
Read MoreRedlich-Kister Finite Difference Solution for Solving Two-Point Boundary Value Problems by using Ksor Iteration Family
In this paper, we are concerned to investigate the efficiency of the second-order Redlich-Kister Finite Difference (RKFD) discretization scheme together with the Four Point Explicit Group Kaudd Successive Over Relaxation (4EGKSOR) iterative method for solving two-point boundary value problems (TPBVPs). In order to apply this block iteration to solve any linear system, firstly we discretize…
Read MoreThe Mediating Role of Entrepreneurial Orientation on the Knowledge Creation-Firm Performance Nexus: Evidence from Indonesian IT Companies
Disruptive innovation has created fast changes in the business environment and competition among companies, especially on information technology companies. Knowledge creation and entrepreneurial orientation are two variables that can improve firm performance. There is still limited study on how knowledge creation and entrepreneurial orientation both affects firm performance. This study aims to discuss how to…
Read MoreProcrustes Dynamic Time Wrapping Analysis for Automated Surgical Skill Evaluation
Classic surgical skill evaluation is performed by an expert surgeon examining an apprentice in a hospital operating room. This method suffers from being subjective and expensive. As surgery becomes more complex and specialized, there is an increase need for an automated surgical skill evaluation system that is more objective and determines more exactly the skills…
Read MoreActive Disturbance Rejection Control Design for a Haptic Machine Interface Platform
This paper proposes an active disturbance rejection control (ADRC) design for a haptic display platform structure. The motivation for the following scheme originates from the shortcomings faced by classical proportional integral derivative (PID) controllers in control theory. The ADRC is an unconventional model-independent approach, acknowledged as an effective controller in the existence of total plant…
Read MoreMethod of Technological Forecasting of Market Behaviour of R&D Products
The current concept of open innovation corresponds to the R&D products transfer model – “role changes”. One of the fundamental provisions of the model is that R&D products are considered for commercialization not only at the final stage of technological readiness, but at any of them. In today’s changing market environment, special attention is paid…
Read MoreCyclic Evaluation of Capacity of Recovered Traction Battery after Short-Circuit Damage
Presented paper discusses possibilities related to the recovery of the damaged lithium batteries after the short-circuit. The recovery procedure was applied on the selected traction LiFePO4 40Ah cell which was initially short-circuited. After the short-circuit, the damaged cell has visible damage of the electro-mechanical properties. For the recovery of damaged traction cell as much as…
Read MoreGene Selection for Cancer Classification: A New Hybrid Filter-C5.0 Approach for Breast Cancer Risk Prediction
Despite the significant progress made in data mining technologies in recent years, breast cancer risk prediction and diagnosis at an early stage using DNA microarray technology still a real challenging task. This challenge comes especially from the high-dimensionality in gene expression data, i.e., an enormous number of genes versus a few tens of subjects (samples).…
Read MoreAccounting Software in Modern Business
The purpose of the research is an investigation of different accounting software products, their functions, and specific features to make easier choice among variety of similar products and analysis of their pros and cons that can influence on companies’ performance. Authors classified accounting software according to its capabilities to serve the different managerial purposes. Because…
Read MoreDiagnosis of Tobacco Addiction using Medical Signal: An EEG-based Time-Frequency Domain Analysis Using Machine Learning
Addiction such as tobacco smoking affects the human brain and thus causes significant changes in the brainwaves. The changes in brain wave due to smoking can be identified by focusing on changes in electroencephalogram pattern, extracting different time-frequency domain features. In this aspect, a laboratory-based study has been presented in this paper, for assessing the…
Read More
