Search Results

Narrow-band Internet of Things (NB-IoT) is a low-power wide-area network (LPWAN) method that was first launched by the 3rd generation partnership project (3GPP) Rel-13 with the purpose of enabling low-cost, low-power, and wide-area cellular connections for the Internet of Things (IoT). As the demand for over-the-air services grows and with the number of linked wireless…

In this study, we conducted an experimental study and efficiency optimization of the outer rotor (hub) BLDC (brushless direct current) motor and axial BLDC motor for light electric vehicles. Both motors were investigated in the simulation environment and experimentally. The axial flux BLDC motor had a rated power of 10 KW, and a rated speed…

The exponential growth in the number of automobiles over the past few decades has created a pressing need for a robust license plate identification system that can perform effectively under various conditions. In Morocco, as in other regions, local authorities, public organizations, and private companies require a reliable License Plate Recognition (LPR) system that takes…

This article presented an overview of the evolution of China’s internet financial industry, emphasizing the critical importance of fintech, a novel economic sector improving the efficiency of financial services through innovative technology applications. The systems referred to encompass those technologies, applications, and tools that enhance the efficiency and accessibility of financial services. The historical trajectory…

The article presents a simulation of obstacle detection based on noise-free optical flow images for motion control of mobile robots. The detection of hazardous areas in optical flow images is accomplished by dividing multiple layers of optical flow vectors into equal parts. Based on the results of calculating the average magnitude of the vectors in…

The quality of the electric power system must be maintained properly, one of which is voltage. Under certain operating conditions, the bus voltage may drop below its minimum level, called bad voltage. A large reactive load can cause a voltage drop across the bus or the location of the bus is far from the generator…

Medical adherence is a major concern globally and is increasing with improved access to medication. Unfortunately, patients taking multiple medications often struggle with confusion about when and how to take each medication. To address this issue, an inexpensive domestic device has been proposed to improve medication adherence. This device uses Wi-Fi and cellular Internet of…

Currently, the quality and quantity of product must be inspected before transporting. Currently the popular unsealing box product inspecting is performed by weighing the box where the errors occur according to the tolerance of the weighting machine and tolerance weight of the product. On the other hand, the quantity of product can be inspected automatically…

In conjunction with psychological stress, physiological indicators such as heart rate (HR) and heart rate variability (HRV) are frequently employed. This study uses a substitute for heart rate variability (HRV) known as short-term pulse rate variability (PRV) to evaluate emotional changes. We examined sixteen college students using a low-cost photoplethysmograph and obtained a short-term PRV…

Limited interactive communication modes between students and teachers in online environments may lead to teachers misinterpreting or overlooking student needs during online teaching. Students learning online may also hesitate to make their needs known even when latent desires in teaching flow, pacing, and review, may be beneficial to the quality of the learning experience. The…

This work investigated the coupling behavior of the scattered-bend loss in displacement sensor during the bending of the fiber by using a multimode polymer optical fiber (POF). To utilize the scattered-bend effect for displacement measurement, a side coupling technique can be used by twisting a pair of POF fibers and bent the structure into a…

Determining the best candidates for a certain job rapidly has been one of the most interesting subjects for recruiters and companies due to high costs and times that takes the process. The accuracy of the models, particularly, is heavily influenced by the discriminant variables that are chosen for predicting the candidates scores. This study aims…

Decision-makers must make a suitable sequence of decisions under uncertainty in a relatively long period for particular projects and situations. Conventional decision-making approaches under uncertainty are based on expected utility theory and do not sufficiently reflect the one-time nature of decisions. Similarly, the conventional approaches do not adequately incorporate the decision-maker’s intuitions in the decision-analysis…

In this paper, an automatic method for detection of olive trees in RGB images acquired by an unmanned aerial vehicle (UAV) is developed. Presented approach is based on the implementation of RetinaNet model and DeepForest Phyton package. Due to fact that original (pretrained) model used in DeepForest package has been built on images of various…

Power losses exist naturally and have to be cared for in the operation of electrical power systems. Many researchers have worked on various methods and approaches to reduce losses by incorporating distributed generators (DG), particularly from renewable sources. These studies are based on the maximum unit penetration of the DGs, which is rarely achieved, resulting…

This research presents a “Multi-camera for pilot’s cockpit measurement system”, which uses four multi-view images to eliminate the instrument and human body shielding and record the touched area. That could record the body reaction time (velocity and acceleration) and trajectory of the tested personnel. Real-time conversion of multi-view images corresponding to the 3D skeletal joint…

This study presents an “Omnidirectional multi-view image measurement system”, which can be used to provide multi-camera 3D reconstruction and multi-view image information. Its characteristic is that four cameras take images from multiple perspectives in the co-sphere framework. The C0 is the middle camera fixed as the geometric center point of measurement, and provides a front…

Recently, many problems have been caused by battery fires. The existing BMS(Battery Managment System) measured the voltage of each cell of the battery through the physical connection between the battery and the control module. However, if a battery with up to 1000 VDC becomes inoperable due to an external factor, the battery is damaged, and…

This article focuses on risk analysis using a multi-criteria decision-making method. Due to many performed risk analyses for soft targets, we are constantly trying to find new methods for objective risk assessment. Many risk analyses are subjective, which is a problem when planning security measures and comparing results (different events, objects, places, etc.). In this…

Globally, road transportation has become one of the most reliable means of moving goods and services from one place to the other. It has contributed immensely to the standard of living and modern civilization. However, this means of transportation is characterised by some issues which are poised to be harmful to the human population if…

This communication proposes a grounded immittance function simulator that, depending on the proper choice of the passive components, can simulate parallel-type impedances of the R-L, R-C, and L-C forms. Only two grounded passive components and two voltage differencing buffered amplifiers (VDBAs) are used to implement the suggested circuit. All three simulated equivalent elements, namely Req,…

Different colleges and universities have different approaches to dealing with low-performance learners. However, in most cases, analgesics do not deal with root problems. This research suggests a model of three layers of variables sequentially adaptable to a deep-root issue. The suggested model can identify early pupils who could be at risk because of inaccurate or…

Collaborative filtering of recommended systems (CFRSs) suffers from overrun false rating injections that diverge the system functions for creating accurate recommendations. In this paper, we propose a three-stage unsupervised approach. Starts by defining the mechanism(s) that makes recommendation vulnerable to attack. Second, find the maximum-paths or the associated related items valued by the user. We…

The relevance of static synchronous compensator (STATCOM) controllers in controlling power network parameters is causing them to be included in contemporary networks. But for the intended objectives to be attained, the best device positioning and parameter settings are essential. This work compares the performance of the particle swarm optimization (PSO) and firefly algorithm (FA) in…

The “Electronic Nose” approach, which is exclusive to gas measurement systems, uses gas sensors as odor detectors. Design faults exist in the existing electronic nose (e-nose) chamber, such as its large volume, difficult construction, etc. In order to obtain measurements in a satisfactory state, we want to create a gas chamber that can provide favorable…