Health Information Technology is playing a key role in healthcare. Specifically, the use of electronic health records has been found to bring about most significant improvements in healthcare quality, mainly as relates to patient management, healthcare delivery and research support. Health record systems adoption has been promoted in many countries to support efficient, high quality…

Predicting trainees’ final academic results in the early stage of programming class is a significant mission in the field of learning analytics. Performing exercises in programming class is hard and it takes a lot of time for trainees. For this reason, careful support with trainees are offered in many classes through classroom assistants (CAs). Even…

This paper examines application of linear general model predictive control (LGMPC). The stability of the LGMPC is proven by means of a demonstration of a theorem stating a sufficient and constructive condition. Lower bounds conditions are found for one of these matrices and then a system with saturation is taken into consideration. The conditions can…

This paper proposed a frequency bandwidth required for the Control and Non-Payload Communications (CNPC) in autonomous operations of the Maritime Autonomous Surface Ship (MASS). The issue was to seek a radio spectrum to meet future demand for safe operations of autonomous ship at sea. As described in Document 5B/841 of ITU-R SG, safe navigation of…

TransJakarta is one of the methods to reduce congestion in Jakarta. However, the number of TransJakarta users compared to number of private vehicle users is very small, only 24% of the total population in Jakarta. The purpose of this research is to know public opinions about TransJakarta whether positive or negative by doing sentiment analysis…

Dyslexia has a lack of ability which causes other disturbances to social-emotional development. Based on an interview with the Chair of the Indonesian Dyslexia Association, increasing self-awareness is one form of dyslexia therapy to reduce that problem. Therefore there is a need for increasing self-awareness to solve that problem, whereas such technology the closest has…

This paper presents the use of Electromagnetic simulation tools such as ADS and CST in order to practice designing the RF front-end transceiver for a continuous-wave radar. Teaching the microwave engineering course based on the conventional education methods results in students who may not be able to apply their theoretical knowledge to design the microwave…

Short-term load forecasting (STLF) plays an important role in building business strategies, ensuring reliability and safe operation for any electrical system. There are many different methods, including: regression models, time series, neural networks, expert systems, fuzzy logic, machine learning and statistical algorithms used for short-term forecasts. However, the practical requirement is how to minimize the…

In this work of technological development and research is presented the work done in the ITSAO to contribute to the use of clean energy such as photovoltaics and the implementation of activities to reduce electricity consumption by the technological community, the monitoring of electricity consumption is made on a monthly basis and an annual report…

Data mining is recognized as an effective technique for extracting and retrieving valuable information or decision from the vast available data. Because of the nature of the functionality of medical centers and hospitals, their data centers contain a collection of valuable information about their patients. By properly processing these data, different applications can be developed…

Plants are living organisms that can hear and recognize the environment around them but cannot communicate to inform their needs. Thus, in the past, humans thought that it was impossible to communicate with plants. However, in this modern era, humans can be able to communicate with these plants. In this paper, we propose a model…

The aim of this article was the identification of cardiovascular diseases, after applying Katz and Higuchi fractal algorithms on 4 databases of ECG signals downloaded from the Physionet website: heart failure (HF), hypertension (H), ischemic heart disease (IHD) and normal sinus rhythm (NSR). For this purpose, initially the ECG signals passed through a filtering stage…

Due to the recent development of information and communication technology, such as sensor technology, IoT technology, and smart technology, interest in maker education is increasing. Maker education offers students experience-based education that allows them to make their own results, giving them various interests and motivations. Recently, various research results on maker education have been under…

An optimization method using a semi-analytical approach is detailed in this paper to design a wideband multilayer meander-line polarizer. It consists of the transmission line equivalent circuit study to find the best values of the shunt components that allow the maximum transmission and a 90 phase difference between two orthogonal components over the entire bandwidth,…

Clustering is a branch of data mining which involves grouping similar data in a collection known as cluster. Clustering can be used in many fields, one of the important applications is the intelligent text clustering. Text clustering in traditional algorithms was collecting documents based on keyword matching, this means that the documents were clustered without…

Recently, there is an enormous research on the smart campus concept due to the revolution of the IoT technologies. The motivation of this paper is to: reinforce the safety on campus, reduce the cost, and take one step forward toward a University smart campus. In this paper, we are not only proposing a framework that…

Physical computing is important for ICT (information and communication technology) Education and other informatics education such as software education since physical computing can provide learning-by-doing education for students. It is also a strong tool to increase students’ programming ability using various type of physical computing tools like a robot. In physical computing, it is necessary…

In Latin America, there is a need for better security systems in different national or sectional votes, which is why this study was carried out, to show a proposal for a security model that helps to obtain better results and to this purpose has been selected information on the database for different Latin American countries,…

In this paper, we present a new Somewhat Homomorphic Encryption (SHE) scheme using computation over complex numbers. We then use Bootstrapping technique to make the scheme Fully Homomorphic (FH) and supports unbounded number of circuit depth. In addition to its homomorphic properties and security level, a main characteristic of the proposed new scheme is its…

Current work demonstrates how open-source optimization library ”Extremum” (OSOL Extremum) can be used to build feedback controller of a satellite. Proposed software was developed to as an attempt to eliminate current problems that are present in scientific area: black-box effect (i.e. there is no opportunity to explore source code, modify it, or simply verify), no…

Spatial and temporal isolation is a crucial issue in embedded systems executing multiple tasks with several levels of criticality. This is considerably significant in the context of multi-processor (or multi-core) embedded systems running multiple mixed-criticality applications in parallel. This work deals with the issue of isolation of different application classes on Network on Chip (NoC)…

The problem of recognizing traffic sign boards in a correct fashion is one of the major challenges since there is an alarming rate of increase in the number of road accidents happening because of incorrect interpretation of traffic sign boards in bad weather conditions. In this paper, a comparative analysis of various noise removal techniques…

Metals of lead and some lead alloys, lead oxide, nickel and cobalt were recovered from exhausted battery by combined hydrometallurgy and pyro metallurgical method. The spent batteries were dismantled and leached in hot 2M and 5M nitric acid. The unleached fraction was heated with sodium carbonate to produce lead oxide. Salts in the leached solution…

The integrating model becomes one of key trends in engineering design. The more the product has functional specifications, the more the industrial consumer apply in many fields. In this paper, a fusion design of architecture platform for autonomous system is demonstrated. It is greater due to combining the specifications of various types in commercial market…

An artificial neural network (ANN) computing system can be significantly influenced by its implementation type. The software implemented ANN can produce high accuracy output with slow computation time performance compared to hardware implemented ANN which runs at a faster computation time but with low accuracy. Normally, software implementation reduces the proficiency and efficiency of the…