Search Results

Circular data are common in biological studies which are involved angle and direction measurements. An outlier in circular biological data mostly related to the abnormality of the data set. The existence of outliers may affect the final outcome of a data analysis. Thus, an outliers’ identification method is essential in circular biological data to determine…

In this paper, a regenerative energy recovery system for electric vehicles charging a battery at a low speed is proposed. When a permanent magnet synchronous motor driving the electric vehicles is driven by a generator, the generated voltage is controlled to rise or drop by using the L-C resonance circuit. As the circuit only has…

Recent years have seen a continued pattern of development in the cloud computing field. Numerous approaches to maximize file transfer capacity are still completely standing for use on cloud computing storage; however, they do not maximize the advantage of data migration scalability and elasticity in cloud storage. One potential problem is that elasticity takes time;…

Many real-life applications based on the wireless sensor networks are equipped with data aggregation mechanisms for suppressing or even overcoming negative environmental effects and data redundancy. In this paper, we present an extended analysis of the linear average consensus algorithm for distributed summing with bounded execution over wireless sensor networks. We compare a centralized and…

This paper focuses on the issue of distributed reinforcement learning (RL) for decision-making in cooperative multi-agent systems. Although this problem has been a topic of interest to many researchers, results obtained from these works aren’t sufficient and several difficulties have not yet been resolved, such as, the curse of dimensionality and the multi-agent coordination problem.…

The study objective was to design and evaluate the agroecological system of an agricultural model with vegetable covers (Luffa cylindrica, Cyclanthera pedata and Mucuna pruriens) associated with tomato plants (Lycopersicum esculentum Mill), Rio Grande and Cherry varieties. The agroecological system is shown with its components of inputs, processes and outputs. The main entrances being solar…

Reinforced concrete (RC) structures are able to dissipate a large amount of energy during earthquake (EQ). RC structures designed to resist EQs must have enough strength and stiffness to prevent any possible collapse as well as to control deflection. Seismic codes include the response reduction/modification factor(R) in calculation of equivalent lateral forces used for EQ…

The stabilizer bar restricts the roll angle of the vehicle when the vehicle steers based on the load balance on both sides of the wheel. Usually, the bar is in the form of the symmetrical U-shaped with the diameter is circular or annular. In order to be able to calculate the diameter of the stabilizer…

In Peru, large volumes of chicken manure are produced, whose compost applied at normal levels improves the ryegrass yield and protein intake, to obtain organic products and contribute to animal, environmental and human health. To evaluate the biofortifying effect of Chicken Manure Compost (CMC) incorporated in (T1): 0, (T2): 10 and (T3): 20 t ha-1…

As an emergent technology in Internet of Things (IoT), the ultimate target of fog computing is to provide a widely distributed computational resources and data repository closer to the network edge providing heterogeneous systems both in terms of software and hardware. The fog system must have the capability to deal with huge number of resources…

The Braille language system or also known as the language for the blind people was created so that these people can understand the vocabulary words depending on the country in which they are located, this system is based on points in which the points raised or also known as the largest points depending on their…

An emerging trend has been observed in the Trust and Reputation (T & R) systems in field of decision-making support for a majority of the provisions propagated by the Internet. It is the extreme importance that peers (users) are able to trust each other and rely on them for file sharing and for services. This…

Microstrip patch antennas (MPAs) are comfortable and have better anticipation compared to traditional antennas. Not only the weight of this type of antennas is lighter but also, they have little capacity, minimum price, reduced in measurement as well as affluence of fiction then observance. Recently, it has been many times reevaluated for the improvement of…

Obstacles, both imagined and real, continue to hinder the wider adoption of Education 4.0 learning technologies although these technologies are available in the mainstream consumer market. At the same time, the boom in Industry 4.0 manufacturing has brought down the prices of these technological tools making them generally more affordable. A case in point is…

This research seeks to describe the proportionality of women graduated from the Professional Career of Mechanical and Electrical Engineering, analyzing their academic performance and the field of work action in which they are working. This study was done with the purpose of highlighting academic performance, and encouraging women to continue with this career, eliminating the…

The character education program conducted through extracurricular areas of the Scout. The method used in this study is the Research and Development (R&D). The research objectives are scouts elementary and junior high school. This research resulted in 3 Prototype Free Model implementation of character education through extracurricular scouting programs in the form of three models…

Productivity is increasing when less input was used in getting the same outcomes. Thus, the effectiveness of productive effort, especially in industry, as measured in terms of the rate of output per unit of input. As in derivative rubber industry which is producing the seal product for final assembly of Disc Drive. The function of…

The increase in employment and productivity is crucial for the economic growth of the European Union. Specifically, the employment of young people needs to be increased. The excessively theoretical approach to education is identified as one of the most significant problems in the educational system. Acquirement of practical experience while study, presents for the students…

Noninvasive measurement of skin tissue oxygen saturation, StO2, is of interest especially in the studies of wound healing and detection of vascular diseases. This work aims to compare Partial Least Square (PLS) regression, K-Nearest Neighbor (KNN) and Artificial Neural Network (ANN) technique in the prediction of StO2 using spectral data obtained from Monte Carlo simulations.…

An experiment to determine the performance of a thermoelectric powered by solar panel for a large cooler box was carried out. The size of the cooler box tested was 1000 mm x 500 mm x 400 mm and inside the cooler box, a plastic bottle containing 19 liters of water was placed. The thermoelectric hot…

Stress occurring in the early days of an individual was often assumed to cause several health consequences. A number of reports indicated that having to deal with unfavourable events or distress situation at a young age could tweak stress responses leading to a broad spectrum of poor mental and physical health condition. Therefore, changes identified…

Metamaterial antennas are some sort of antennas which utilize metamaterials to improve the efficiency of small (small electrical) antenna systems and also enhance the antenna’s radiation pattern. The unusual properties of metamaterials such as coefficients of permittivity and permeability, as well as the negative refractive index, have led to increase the use of these artificial…

In fast charging station for Battery Electric Vehicles (BEVs) the three-phase PWM (Pulse Width Modulation) inverters generate parasitic Differential-Mode Voltages (DMV) and Common-Mode Voltages (CMV). Parasitic voltages are a side effect of using the width modulation to shape the phase-to-phase inverter’s voltage. In this article the authors present a mathematical description of the differential-mode (DM)…

In fast charging station for Battery Electric Vehicles (BEVs) the three-phase PWM (Pulse Width Modulation) inverters generate parasitic Differential-Mode Voltages (DMV) and Common-Mode Voltages (CMV). Parasitic voltages are a side effect of using the width modulation to shape the phase-to-phase inverter’s voltage. In this article the authors present a mathematical description of the differential-mode (DM)…

This review paper discusses recent research outcomes of fabricating three-dimensional (3D) heterogeneous structures in complementary metal-oxide-semiconductor (CMOS) integrated circuit (IC) technologies to enable smart future chips. The CMOS-based 3D heterogeneous structures demonstrated are vertical magnetic-cored inductors for radio-frequency (RF) ICs, through-back-end-of-line (BEOL) metal wall structures for global flying noise isolation, above-IC nano crossbar array electrostatic…