Search Results

The ability to verify the critical risk factors related to an effective diagnosis is very crucial for improving accuracy on coronary heart disease prediction. The objective of this research is to find the best predictive model for coronary heart disease diagnosis. Three approaches are set up to achieve the goals (1) investigating the classifier algorithms…

In this paper, the multi-objective optimization process was applied for the surface grinding process of 3X13 steel using an aluminum oxide grinding wheel (WA46J7V1A). For each experiment, three cutting parameters, including the workpiece velocity, feed rate, and the depth of cut, were controlled to change according to the experimental matrix. At each experiment, surface roughness…

The accurate identification and characterization of microbiological species is a must that allows us to design engineered pharmacology to tackle down the diversity of diseases derived of them. This paper presents a study about the usage of both classical dynamical and electrodynamics in conjunction to the Feynman’s path integral to describe as well as identify…

Bearings are the key components of many rotating machines, in which serious failure or even major breakdown may occur due to their abnormal operation and defects. Thus, accurate fault diagnoses of bearing elements are essential for proactive predictive maintenance. However, the using of multiple sensors with high sampling rate reveal considerable shortages in the analysis…

Harmonic distortion is a problem that can be caused by the use of power electronic devices. The effect of harmonics has an impact on changes in the input voltage source waveform which is referred to as wave defects. This incident has an impact on electronic faults and overheating of the power transformer coil as a…

This study aims to analyze a person’s intention in using self-service technology (SST) services during the pandemic COVID-19. Where this time, raising problems one of the social distancing that affects a service provided, especially on services that use technology that applies SST. This study develops from previous research where the customer has satisfaction in using…

This paper provides an overview of Intelligence, Surveillance, and Reconnaissance (ISR) data with respect on NATO standards and recommendations; further presents methods, tools, and experiences in ISR data processing in military operations. The steps of the Intelligence cycle and disciplines Business Intelligence (BI), Data Warehousing, Data Mining, and Big Data are presented in the introduction.…

The phenomenon of magnetic fields is affected depending on the polarity, the positive and negative poles will give a response of attraction and repulsion that can be easily observed. Being also important as an educational element where the theory materializes and is observed, which enriches all science. The objective of this work is to create…

Solving equations does not require only to well master the techniques but also to well understand the different underlying concepts and processes. Many of the mistakes made by the students are often due to misinterpretation of the concepts taught, especially the use of letters which the main conceptual obstacle that students have to overcome. We…

Water is an important vital resource, and must be protected and saved. Unfortunately, millions of liters of water are wasted annually at the national level in Peru, one of the factors is the discomfort when people take a hot shower, because first the water is cold, which is contained in the pipes of domestic connections…

Application in the field of medical development has always been one of the most important research areas. One of these medical applications is the early prediction system for heart diseases especially; coronary artery disease (CAD) also called atherosclerosis. The need for a medical diagnosis support system is to detect atherosclerosis at the earlier stages to…

With recent advancements in medical filed, the quantity of healthcare care data is increasing at a faster rate. Medical data classification is considered as a major research topic and numerous research works have been already existed in the literature. Presently, deep learning (DL) models offers an efficient method for developing a dedicated model to determine…

Practically level of design element (i.e., explore, sharing, connect) is an essential of heutagogical approach. The self-determined learning process can be at ease with the implementation of these elements, and the critical step is reliability to measure teaching and learning feedback. Although various instruments were proposed in the literature to assess heutagogy elements, the specific…

The water heating with parabolic trough solar collectors (PTC) is a very widespread and at the same time quite promising solar technology. However, PTC presents several problems in terms of the profitability of water heating. For this reason, our study of water heating with PTC collectors consists of two main parts. In the first part,…

The evolution of IT keeps growing worldwide, especially mobile technology. Today, mobile technology not only held by adults but also kids. The proportion of kids who used smart- phones is increasing each year. The growing technology in mobile applications encourages developers to build educational apps to help kids learn to know alphabets, numbers, animals, and…

Since the release of of the IPv6 Routing protocol for Low-Power and Lossy Networks by the IETF ROLL working group, several enhancement schemes were proposed. In fact, They aim to extend the network lifetime, reduce congestion, mitigate end to end delay and moderate energy consumption. In fact, considering the vast area of Low-Power and Lossy…

Ad-Hoc networks are self-organized wireless networks. Finding a secure and efficient route leading from a specific source node to an intended destination node is one of the serious concerns in mobile Ad-Hoc networks. ARANz is one of the significant protocols that has been proposed for such networks. ARANz implements the authentication methods used with the…

Analysis and classification of lung diseases using X-ray images is a primary step in the procedure of pneumonia diagnosis, especially in a critical period as pandemic of COVID-19 that is type of pneumonia. Therefore, an automatic method with high accuracy of classification is needed to perform classification of lung diseases due to the increasing number…

The text’s production carried out in this research aimed to 5-year-old children from the IE 555 Inmaculada Concepción, under the modality dictated to adult, had a design and application of 22 sessions during three months with the experimental group. On their methodological approach was based on the expression ludocreative, articulating the written experience jointly with…

Cancer is the leading cause of death in world. Currently, there are no approved vaccines to avoid the spreading of this disease. Drug discovery have played important role for discover of new potent drugs that could efficiently and cost-effectively. Pyrazoline analogue compounds known to have good potency as anti-cancer. The aim of this study is…

The technology of Big Data got the capability to process large amounts of data, manage them effectively and make retrieval whenever it is required. Decision making in any organisation is a challenging task since decisions need to be made based on the accessibility of data and its status, this becomes more challenging especially in large…

In this paper, the performance evaluation of a line-start three-phase Synchronous Reluctance Motor (SynRM) with symmetrical distributed brass rotor bars is presented. The machine, which has been designed from a conventional three-phase induction motor (IM) NEMA frame stator is proposed as an alternative to a squirrel cage induction motor (SCIM). The 2D Finite Element Analysis…

Global changes caused by the IV Industrial revolution and globalization processes resulted in a redistribution of roles of participants in innovative infrastructures of countries. Universities are leading both in terms of generating R&D products and in terms of developing business activities. Now there is a problem of insufficient methodological support of technological universities for pricing…

Vehicle systems are controlled by embedded electronic devices called electronic control units (ECUs). These ECUs are connected together with network protocols. The Controller Area Network (CAN) protocol is widely implemented due to its high fault tolerance. However, the CAN is a serial broadcast bus, and it has no protection against security threats. In this paper,…

This paper studies a trade-off between security (intercept probability (IP)) and reliability (outage probability (OP)) for a multi-hop decode-and-forward (DF) relaying protocol in an underlay cognitive radio network, in presence of a multi-antenna eavesdropper. In the considered protocol, all primary and secondary terminals are equipped with multiple antennas, and they employ transmit antenna selection (TAS)…