Search Results

To have enough information on time can be helpful when companies try to reduce costs and operate more efficiently. An international company that supplies parts for the automotive industry is currently testing its new facilities in Mexico. The relocation of the raw materials and finished goods warehouses were tested using a P-Median model. The operating…

In Peru, approximately since 2013, a necessary change has begun in the importance given to research, science, technology, and technological innovation. Likewise, in 2014, a new University Law was approved that among other aspects also promotes research production in universities. Against this context, the universities begin to improve with more emphasis activities related to research.…

The increasing cost of fishmeal and soybean meal forces us to look for unconventional sources of protein to feed guinea pigs, being able to use earthworm meal Eisenia foetida (EF) with 60-80% high quality raw protein; for this, the contribution of digestible nutrients and metabolizable energy must be known to formulate rations. The objective is…

The differences of stunting through socio-economic and productive indicators in high Andean community of Peru were evaluated ((11°42′58.16′′ S, 75°37′31.13′′ W, altitude 3470 m). Cross-sectional study in 52 mothers with children under 5 years old was carried. A validated nutritional survey was applied. Z-scores height for age and nutritional status were determined using anthropometric methods…

Higher Education Institutions (HEIs) have begun rapidly adopting, selecting and implementing ERP systems due to the call by various governments to streamline their processes and practices. While ERPs are expanding at much faster rate, there is pressure on most HEIs to ensure quality. For quality model, ISO/IEC 25010 is an international standard for software and…

Jeju Island is the largest island of South Korea and has an independent electric supply system. The island has a special energy plan that realizes itself a carbon-free region by 2030. Wind and solar energy resources are considered as an important means. The introduction of weather-variable renewable energy generation sources into the electric power system…

The digital factory is a concept signing a new era for industry, the so-called Industry 4.0, in which ordinary production systems like manufacturing plants, machineries and utilities are being equipped with diagnostic and sensitive instrumentation to be connected to digital shared networks. This data-sharing, trough the big data management techniques, is a fully integrated base…

News companies have a need to automate and make the process of writing about popular and new events more effective. Current technologies involve robotic programs that fill in values in templates and website listeners that notify editors when changes are made so that the editor can read up on the source change on the actual…

The study objective was to design and evaluate the agroecological system of an agricultural model with vegetable covers (Luffa cylindrica, Cyclanthera pedata and Mucuna pruriens) associated with tomato plants (Lycopersicum esculentum Mill), Rio Grande and Cherry varieties. The agroecological system is shown with its components of inputs, processes and outputs. The main entrances being solar…

Productivity is increasing when less input was used in getting the same outcomes. Thus, the effectiveness of productive effort, especially in industry, as measured in terms of the rate of output per unit of input. As in derivative rubber industry which is producing the seal product for final assembly of Disc Drive. The function of…

In high voltage engineering, air is the one insulation gas that can ionized cause by electrical discharge. Air consisted of many gases such as O2, N2, CO2, H2, etc. In order to study the characteristic of the insulation gas, we can apply density functional theory (DFT) to determine gas ionization level such as charge distribution…

Agriculture, being the vital sector, contributes to India’s GDP by 18%. It is necessary to enhance the production in this sector with minimal need of resources to get the good yield of crops. It in turn boosts up the necessity of automation in the field of agriculture. This paper discusses about the experimental study which…

The technological advance as well as needs of human beings made that systems became more and more complex. In contrast, the use and creation of new modelling languages became simple and no more reserved for a handful of language experts. Consequently, many new practices of systems implementation emerged, among them, the use of different domain…

Since environmental requirements penetrate engineering processes to keep global warming and to reduce pollutant emissions, the system operation should be designed based on environmentally approach friendly. Operationally, the system processes are supported by energy suppliers to meet continuously energy transaction while clean and green energies are also targeted to keep the environmental conditions. In other…

Manufacturing System (MS) sizing is a crucial task to complete in order to obtain the desired MS performance and efficiency. It involves selecting the required number of resources from each used type in a given planning horizon. In fact, different approaches coupling simulation/optimization tools have been developed to solve this issue and evaluate the MS…

Perishable inventory management contributes simultaneously to society and the economy, by reducing food wastage and capitalizing on the freshness of goods. For this reason, countless mathematical models have been developed for their effectiveness and cost-efficient management. Yet, the majority of these models can only optimize systems for a limited time frame, allowing for small gains…

The importance of programming skills has increased with advances in information and communication technology (ICT). However, the difficulty of learning programming is a major problem for novices. Therefore, we propose a logic error detection algorithm based on structure patterns, which are an index of similarity based on abstract syntax trees, and error degree, which is…

Spatial and temporal isolation is a crucial issue in embedded systems executing multiple tasks with several levels of criticality. This is considerably significant in the context of multi-processor (or multi-core) embedded systems running multiple mixed-criticality applications in parallel. This work deals with the issue of isolation of different application classes on Network on Chip (NoC)…

We have suggested an architecture of the second-order all-pass active RC-filter (ARCF), based on three differential difference amplifiers (DDA’s), which provides full set of amplitude-frequency responses (AFR’s) (low pass filter (LPF), high pass filter (HPF), band pass filter (BPF), rejection filter (RF)). We have given the basic equations, which allow ARCF’s. The results of computer…

This study examined the performance of two proposed permutation methods for Chow test analysis and the Milek permutation method for testing structural break in linear models. The proposed permutation methods are: (1) permute object of dependent variable and (2) permute object of the predicted dependent variable. Simulation from gamma distribution and standard normal distribution were…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

This paper is an extension of work originally presented in 2018 Global Smart Industry Conference (GloSIC). Researches are devoted to the development of Smart technology for complex objects control and prediction on the basis of a distributed Honeywell DCS control system of the TengizChevroil enterprise using the example of a technological process of medium pressure…

Enhancing underwater visualization using hybrid technique is generally employed into oceanic production. Through growing oceanic learning, undersea processing has drawn extra importance owing towards necessary task of picture towards attaining data. Although, suitable to reality of dust-like constituent and beam reduction, undersea descriptions continually experience small contrast and color alteration. In this paper, we estimate…

A 3D image adds realism in viewing experience and can assist in simplifying the graphical displays. A Third dimension supplement to the input can improve pattern recognition, and can be used for 3D scene reconstruction and robot navigation. Recently popularity of 3D hardware is also increased which makes it a hot topic. The production of…

High Performance Computing (HPC) systems offer excellent metrics for speed and efficiency when using bare metal hardware, a high speed interconnects, and massively parallel applications. However, this leaves out a significant portion of scientific computational tasks, namely high throughput computing tasks that can be trivially parallelized and scientific workflows that require their own well-defined software…