Search Results

The Internet of Things (IoT) application has been experiencing increasingly progressive demand, especially for embedded devices (ED). However, the ED has limited capabilities, low power consumption resources, and low bandwidth in connecting to the Internet by using Wireless Sensor Networks (WSNs). Therefore, the WSNs form creates a necessity for new technologies and protocols for the…

There is currently an overload of information on the internet, and this makes information search a challenging task. Researchers spend a lot of man-hour searching for journals related to their areas of research interest that can publish their research output on time. In, this study, a recommender system that can assist researchers access relevant journals…

Phasor Measurement Unit (PMU) is an integral device for tracking, protection, and regulation of the power network. PMU gives synchronised calculations of actual-time data for voltage phasor, current phasor, and the frequency. Placing PMU in every node to observe the power network is not realistic from an economic standpoint and even for big data management.…

Recent technological advances allow us to utilize remote monitoring systems or real-time access of data. While the use of remote monitoring systems is not new, there are still numerous applications that can be explored and improved on, one such is groundwater level and quality monitoring. In the Philippines, the extraction of groundwater for both domestic…

This paper is an extension of a research work presented at ICSIoT 2019. An attack continuum against the insider attack in mobile money security in Ghana using a witness based crypto- graphic method proposed by Alornyo et al. resisted the service provider from peddling with users data for economic gains. Our improved scheme achieves a…

This paper covers a new topology, a synchronous wind turbine generator, and a solar photovoltaic generator. The Permanent Magnet Synchronous Generator is linked to the grid by back-to-back voltage source converters (BtB VSC), consisting of a two-stage rectifier and a five-stage Neutral Point Clamped inverter, operated by the Space Vector Pulse Width Modulation technique. A…

In this paper, a modified configuration of Single-Phase Seven-Level Packed U-Cell (PUC) Multilevel Inverter for solar photovoltaic system is presented & investigated for standalone operation. The Seven-Level MPUC Inverter comprises of six semiconductor switches & two DC links which generates seven voltage levels at the inverter output. The maximum amplitude of inverter output voltage is…

Optical sensors exist in various forms and one of them is fiber bragg gratings (FBG). Performance evaluation was simulated for FBG sensing. The simulation involves different grating profiles tested with complete optical sensing system. The system involves a broadband light source, FBG of various profiles and optical spectrum analyser for data interpretation. Different profile of…

In this study, the ASTM A48 Class 30 gray cast iron was cast in a medium frequency induction furnace. The ultimate tensile strength (UTS), ultimate flexural strength (UFS) and microstructure were determined in accordance with ASTM E8/E 8M-80 and ASTM A438-80 (1997). From the results of this study, the graphite size at overheating temperatures 1350oC…

With the advancements in technology, smart entities are becoming increasingly intelligent, therefore, increasing their interaction capabilities with their surrounding environment. Apart from the traditional smart low profile devices, these entities now involve cars, mobiles, televisions, and extend to universities and smart cities. One of the bi-product of the smart cities is the emergence of the…

Reconfigurable systems are considered as promising technology that enables the design of more flexible and dynamic applications. However, actually existent design flows are either low-level (so complex) or they lack support for automatic synthesis. In this paper, we present an ontology-based modeling approach for reconfigurable systems. Our approach is based on model-driven engineering process and…

Computer vision offers several strategies that permit computers to comprehend the substance of inputted data to extract the relevant highlights features. That gives the possibility to develop several successful recognition systems like face identification. One of the enormous difficulties these days is the way to have a prompt identification face in a multi-client identification system.…

Most crossroads use a traffic light to communicate between human-driven vehicles by conveying to the drivers when to stop and when to proceed in an organized fashion. However, the stop and wait nature of traffic lights cause slower mobility, leading to congestion. This paper presents a localization scheme based on two-dimensional (2D) flat geometry adaptation…

Transformer health assessment techniques, based on applicable standards, such as the dissolved gas analysis (DGA), through laboratory testing or online monitoring are used to analyze the symptoms of a failure which develops in transformers from an early stage. The DGA from a sample of dielectric liquid taken from the main tank generates information on the…

This paper comprehensively focused on the information systems for purchase process optimization (IS) that are currently being used. It elaborates four crucial and important areas in relation to purchasing and supply management. These includes; Identifying the process involved in purchasing, how information systems are implemented and used in enhancing the supply process, understanding the key…

Until recent years, code quality was not given due significance, as long as the system produced accurate results. Taking into account the implications and recent losses in critical systems, developers have started making use of static code analysis tools, to assess the eminence of source code in terms of quality. Static code analysis is conducted…

Fault-tolerant applications are created by replicating the software or hardware component in a distributed system. Communications are normally carried out over an Ethernet network to interact with the distributed/replicated system, ensuring atomic multicast properties. However, there are situations in which it is not possible to guarantee that the replicas process the same data set in…

This paper is carrying out a practical identification of a DC servomotor from input and output data. The system’s step response was obtained from an acquisition card that we have developed using a microcontroller. The data is collected and downloaded to the PC Thought RS232 Protocol to process the identification process using polynomial models (ARX,…

In a radial distribution system, component failure leads to service interruption and subsequent disconnection of a few load points. An abnormal variation in the voltage levels and high power loss gives rise to reliability issues. In this work, feeder reconfiguration is performed to improve reliability, minimize voltage deviation and power loss. A Binary Particle Swarm…

One of the open domain challenges for Spoken Dialogue System (SDS) is to maintain a natural conversation for rarely visited domain i.e. domain with fewer data. Spoken Language Understanding (SLU) is a component of SDS that converts user utterance into a semantic form that a computer can understand. If we scale SDS open domain challenge…

Currently, increasing penetration of the Wind Energy Conversion System (WECs) in Power generation systems has influenced the supply of electrical power reliability for the consumer in comparison with other traditional sources. In this paper, the performance and efficiency of a new optimization approach referred to as the “Differential Evolution Optimization Algorithm” (DEOA) to measure the…

Wind energy is emerged rapidly as the most important and viable sustainable power source due to the mature technology and wide availability. The integration of wind energy sources and utilization of nonlinear loads having different characteristics results in several challenges in a distribution system. One of which is power quality issue .Hence, in this work,…

The main advantage of software-defined visible light communication (VLC) systems is that they allow us to reuse modulation, coding, synchronization and medium access techniques used in conventional radio systems. This article focuses on the implementation of an uplink alternative using an infrared (IR) light communication system. For this goal, analog front-ends are designed and implemented.…

Technology is advancing faster today than ever before with evidence of its impact in all facets of our lives. With the spread of the novel COVID-19 pandemic across the world, schools were closed as part of lockdown measures to contain the virus thereby disrupting academic curricula. Academic institutions leveraged ICTs to virtually engage students and…

The paper is aimed as a concise and relatively self-contained description of the educational environment TOST, used in teaching and learning Operating Systems basics such as Processes, Multiprogramming, Timesharing, Scheduling strategies, and Memory management. TOST also aids education in some important IT concepts such as Deadlock, Mutual exclusion, and Concurrent processes synchronization. The presented integrated…