Search Results

The Present work is to investigate effect of dry sliding wear behaviour of ZA27 base alloy, after reinforcing it with Molybdenum Di Sulphide (MoS2) particles from 0% to 4% in five steps. To examine the wear behaviour of both reinforced and un-reinforced material, dry or unlubricated pin on disc tests were conducted. These tests were…

Lime mortar, an age-long building material is primarily popular for its flexibility, the basis of its ability to accommodate masonry deformation, hence durability. However, lime’s characteristic delayed setting/hardening time, low mechanical strength and poor internal cohesion often characterised by volumetric changes have put its use into decline. These shortcomings have therefore relegated relevance of this…

Accurate machining control is indispensable for the smart factories of tomorrow. Variations in controller responses may cause unacceptable process deviations during machining leading to productivity losses and possible damage. In the present work, a complex order PIα+jβDγ+jθ(COPID) controller was designed to effectively control surface roughness generation while machining CNT Al-Mg hybrid composites. Performance of the…

Electrical and optical properties of polymer nanocomposite thin films have been analyzed to study their reliability and competency as a component for optoelectronic devices such as LED and solar cells. Polymer nanocomposite encounters various challenges, such as the dispersion of nanoparticles in the matrix that hinders their efficiency for potential devices. In this paper, two…

Unreinforced masonry (URM) wall is one of the oldest types of walls used around the world. During earthquakes, URM walls present a real danger to life safety due to their behavior characterized by a brittle failure caused by their feeble shear resistance to in-plane loads, which make their strengthening necessary. Numerous studies had been used…

This work depicts the preparation of Ni-C ultrafine composite from used engine oil. The used oil was emulsified with detergent loaded with Ni (OH)2. The loaded emulsion was sprayed on electric plasma generated between two C electrodes to a DC main 28 V and 70-80 A. The purged Ni-doped carbon fume was trapped on a…

The SENSORIA Reference Modeling Language (SRML) aims at modelling composite services at a high level. Continuous time SRML extends SRML so that it can model services whose components can perform both discrete processes and continuous processes. In order to show how continuous time SRML is applied, in this paper, we systematically introduce our study on…

Quality of service is a significant part of formulating a composing of web services to satisfy the user’s request, especially when several services exist and have been implemented in the same field and functionality. The selection process of web services among many options can be taken based on the quality of service considerations, fitness parameters,…

The measurement of Leaf Area Index is of fundamental importance in agriculture and ecological research because it reflects plant growth. This study aims to estimate LAI from, NDVI derived from standard eight days composite MODIS surface reflectance, acquired during the rice growing period. A two-stage model was developed to relate the LAI of rice to…

In this report, polymeric composites made from Polypropylene (PP) and talc powder were studied. The talc powder with different portions of 10%, 20%, 30% by weight was used to create samples. The samples were examined by the tensile test and the flexural test according to ASTM D638 and ASTM D790. The surface morphology of the…

Prior to the 19th century discovery of Portland Cement (PC), Lime Based Mortar remained popular due to its flexibility, permeability and more importantly, associated low carbon emissions. However, lime’s characteristic delayed setting/hardening time, low mechanical strength, poor internal cohesion and some volumetric changes have overshadowed significance of its outstanding features particularly, flexibility, and consequently put…

This paper investigates the in plane behavior of unreinforced masonry (URM) walls externally strengthening on both sides by different configurations of unidirectional carbon fiber reinforced polymer (CFRP) wraps. In order to evaluate the effectiveness of using the strengthening systems to improve the in plane behavior of masonry walls, the experimental program was conducted by testing…

Web services give a new view of the web as the biggest, widely accepted and the most straightforward distributed software platform. Their composition into applications and business processes is still a complex, non-trivial task, requiring highly rational efforts not only from the software developers, but from the quality assurance specialists. The provision if web service…

This paper describes a silicon carbide-field effect transistor (SiC-FET) gas sensor that is able to detect NO, O2, NH3, CO, and SO2. The gate of the sensor FET is a gas detection layer that consists of yttria-stabilized zirconia, nickel oxide, and platinum. The threshold voltages of the sensor depend on the target gas concentration, measurement…

Problem statement: In general, the water hyacinth is a biennial aquatic plant for many seasons with propagated quickly to become serious weeds in general water sources. The water hyacinth is caused carbon dioxide in the atmosphere as a greenhouse effect, which leads to climate change, the environmental concerns of the world today. The agricultural residue…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

 denotes circulant graph  of order  for a set  where  Circulant graph  is said to have the Cayley Isomorphism (CI) property if whenever  is isomorphic to , there is some  for which . In this paper, isomorphic properties of circulant graphs that includes  Self-complementary circulant graphs;  Type-2 isomorphism, a new type of isomorphism other than already known Adam’s isomorphism of circulant graphs and  Cartesian product and factorization of…