Search Results

The accurate identification and characterization of microbiological species is a must that allows us to design engineered pharmacology to tackle down the diversity of diseases derived of them. This paper presents a study about the usage of both classical dynamical and electrodynamics in conjunction to the Feynman’s path integral to describe as well as identify…

The article considers the task of developing a fuzzy-logical PID-type controller for a nonlinear dynamic system. A feature of the structure is presented, which consists in simplifying its controller by decomposition. In the simplest version, three fuzzy controllers are used with one input and one output and separate rule bases. Parameters of fuzzy controllers are…

The emerging trend of modern industry automation requires intelligence to be embedded into mobile robot for ensuring optimal or near-optimal solutions to execute certain task. This yield to a lot of improvement and suggestions in many areas related to mobile robot such as path planning. The purpose of this paper is to review the mobile…

Prior to the 19th century discovery of Portland Cement (PC), Lime Based Mortar remained popular due to its flexibility, permeability and more importantly, associated low carbon emissions. However, lime’s characteristic delayed setting/hardening time, low mechanical strength, poor internal cohesion and some volumetric changes have overshadowed significance of its outstanding features particularly, flexibility, and consequently put…

The goal of this research work is first to investigate the comparison between a batch and a continuous pyrolysis reactor (at 500, 550 and 600 °C) and the eventual differences and similarities that are obtained by analysing the obtained liquid and gas compositions. All the products formed were examined: liquids by GC-MS/FID and Karl Fischer…

This research aimed at developing a method of glaze material making from used glass bottle waste combined with kaolin. Then, the microstructure and hardness level of glaze products were characterized. Furnace heaters were used in research to heat glaze material by varying the holding time of 30, 45 and 60 minutes. The composition of glaze…

Source parameters of tsunami waves are an essential part of any modern tsunami warning system. Recalculation of a measured time series (wave profile obtained by a seabed-based pressure sensor) in terms of initial sea surface displacement at tsunami source is among the most (or) one of the promising approaches to be applied in a warning…

Since environmental requirements penetrate engineering processes to keep global warming and to reduce pollutant emissions, the system operation should be designed based on environmentally approach friendly. Operationally, the system processes are supported by energy suppliers to meet continuously energy transaction while clean and green energies are also targeted to keep the environmental conditions. In other…

In this paper, a multiple-objective Metaheuristics study is discussed. Initially, three mono-objective metaheuristics will be explored in order to design and optimize Radio-Frequency integrated inductors. These metaheuristics are: An evolutionary algorithm called The Differential Evolution (DE), An algorithm supported on Newton’s laws of gravity and motion called the Gravitational Search Algorithm (GSA) and, finally, A…

The article of given research presents the mathematical and computer modeling of flame attenuation in narrow channels for different fire extinguishing and explosion suppression compositions. Such kind of flame distribution and attenuation could be considered for different media and channels but in this case it was considered for narrow channels. The effect on the combustion…

Enhancing underwater visualization using hybrid technique is generally employed into oceanic production. Through growing oceanic learning, undersea processing has drawn extra importance owing towards necessary task of picture towards attaining data. Although, suitable to reality of dust-like constituent and beam reduction, undersea descriptions continually experience small contrast and color alteration. In this paper, we estimate…

Domain specific modeling (DSM) has become popular in the software development field during these last years. It allows to design an application using a domain specific modeling language (DSML) and to generate an end-solution software product directly from models. However providing a new DSML is a complex and costly job. This can be reduced by…

Nd:YAG laser has shown some potential to be used in dental practice replacing the conventional method. In particular, it can be used to modify the tooth surface by the ablation process. The laser provides an ability to accurately deliver a significant amount of energy into a confined region. Thus, alteration of the sample surface and…

A sequential pre-treatment of demineralization and torrefaction, was carried out on palm empty fruit bunches (EFB). EFB and demineralized EFB (DEFB) were torrefied in a vertical tubular reactor in the temperature range of 200 to 280 °C for 30 mins under nitrogen (flow rate:100 mL/min. The pretreated samples were characterized using proximate and ultimate analyses,…

In this study, torrefaction pretreatment on palm kernel shell (PKS) was investigated using fixed bed reactor. The PKS was torrefied at the temperatures of 210, 230, 250, 270 and 290 °C. The characteristics between untreated and torrefied PKS were compared. The results showed that, the mass and energy yield lessened, while the calorific value augmented…

Industrial estate firms have important roles in national development through the industrial development. In the course of their life, industrial estate firms ought to follow the firm life cycle pattern. The common pattern shows that the period, in which the firm experiences profit increase, will be directly followed by consistent profit and profit decrease. Should…

There are more than 7billion people in the world where there are around 500 million people in the world who are denied from normal lifestyle due to physical and mental issue. It is completely fair to say that every person deserves to enjoy a normal lifestyle. While physically and mentally challenged people find suitable way…

Ship pilotage risk decision-making problems, which is an important issue affecting the safety of navigation. Before the study on the risk decision of ship pilotage, all use direct analysis of fault tree methods. In this paper, through the process analysis of ship pilotage fault tree, the model of fault tree is standardized and simplified. The…

Multiprocessing can be considered the most characteristic common property of complex digital systems. Due to the more and more complex tasks to be solved for fulfilling often conflicting requirements (cost, speed, energy and communication efficiency, pipelining, parallelism, the number of component processors, etc.), different types of component processors may be required by forming a so…

The paper shows a method of transforming an asynchronously feedbacked Mealy machine into a Moore machine. The transformation is done in dual-rail logic under the use of the RS-buffer. The transformed machine stabilizes itself and is safe to use. The transformation is visualized via KV-diagrams and calculated with formulas. We will present three use-cases for…

This work depicts the preparation of Ni-C ultrafine composite from used engine oil. The used oil was emulsified with detergent loaded with Ni (OH)2. The loaded emulsion was sprayed on electric plasma generated between two C electrodes to a DC main 28 V and 70-80 A. The purged Ni-doped carbon fume was trapped on a…

A web service impersonation is a class of attacks in which an attacker poses as or assumes the identity of a legitimate service to maliciously utilize that service’s privileges. Providing security for interacting cloud services requires more than user authentication with passwords or digital certificates and confidentiality in data transmission. In this paper, we focus…

In this work fenugreek(Trigonella Foenum Graecum) extract was used to synthesis gold nanoparticles by simple and safe method .In aqueous solution of chloroaurate ions, fenugreek extract was used as reducing agent and gum Arabic as stabilizer by one synthetic route which is microwave irradiation .The nanoparticles were characterized and investigated by ultraviolet-visible (UV-Vis) spectrophotometry, transmission…