Search Results

The objective of this research is to study the behaviour of the anaesthesia monitor Conox during natural sleep to open the gate for this devices to assess subjects during this stage. The values of qCON and qNOX indices and EEG frequency bands are analysed during night sleep of 10 volunteers when they lose consciousness, in…

The Coriolis force in the ocean at mid to high latitudes can cause significant deviation of flow over bottom topography, including formation of Taylor columns. Structures in a tidal zone will experience zero inertial current between every tidal change. Around periods of directional change, the Coriolis force may be tapped into for energy. Factors like…

In the recent past, there has been a renewed shift into biomass and other recycled waste sources for biodiesel production and utilization. This is a critical area of research and study in which this present work intends to review and identify gaps in literature by shifting the focus of review to non-plant based sources for…

The purpose of this article was to determine the incidence between learning strategies and academic goals in the competences of the curricular experience of electronics and digital circuits in engineering students of a private university in Lima, Peru. The objective was to explain how learning strategies and academic goals explain the behavior of engineering students…

This research aims to investigate the energy and power management of a battery-supercapacitors Hybrid Energy Storage System (HESS) for Electric vehicles (EVs). A bidirectional DC-DC converter, a battery and a set of supercapacitors were employed to construct the parallel semi-active architecture of HESS. Two strategies of Rule-Base Linear Quadratic Regulators (R-B LQRs) were proposed to…

The learning difficulties of Object-Oriented Programming can be one of the causes of failure in college students, which can even lead to student dropout. This article has the purpose of analyzing the main learning difficulties of object-oriented programming using the Java programming language in Systems Engineering students of the Universidad Nacional Tecnológica de Lima Sur…

Many recent studies on autonomous driving have focused on model-based control. A number of studies has addressed that simple models such as the Kinematic Bicycle Model are easier to design controls for autonomous driving systems. However, such a simple vehicle model has a weakness in that it is subject to modeling errors. This is because…

This document proposes a new methodology for lifestyle analysis and disease diagnosis for young academics using a strategic planning and disruptive innovation approach. Its objective is to consider and study a new form of treatment to improve the quality of life and health of students in parallel with their development, this through a quantitative methodology…

In this paper we study a cell division cycle modeled by a system of partial differential equations with an age structure. This model translates the many regulatory mechanisms within the cell cycle where it introduces the notion of phases. The individual cell can be either in I phases where the transition between theses phases are…

This paper is an extension of work originally presented in IPFA 2019. In the original work, a new memory bit-counting method in physical failure analysis (PFA) using laser deprocessing technique (LDT) is introduced. In the present paper, LDT will be further exploited and the methodology applied to PFA will be fully discussed. Compared to the…

The adoption of Engine-in-the-loop technology shows real behaviour. This study presents a test runs simulation platform with real engine data. In addition, a test bench model is a demand approach that offers a significant potential to provide an excellent reproducibility of test runs. The platform includes the data integration to upgrade tests run and a…

Increased recycling of PVC has become a requirement in industrial and scientific research level. Several studies will be realized. To confirm and check the recycled materials performance, it will be important to go through numerical modeling, which consists not only in validating the results of the experiments, but also in predicting what happens when the…

Modern digitalized cyber domains are extremely complex ensemble. Cyber attacks or incidents against system may affect capricious effects for another system or even for physical devices. For understanding and training to encounter those effects requires an effective and complex simulation capability. Cyber Security Exercises are an effective expedient for training and learning measures and operations…

This paper provides an overview of Intelligence, Surveillance, and Reconnaissance (ISR) data with respect on NATO standards and recommendations; further presents methods, tools, and experiences in ISR data processing in military operations. The steps of the Intelligence cycle and disciplines Business Intelligence (BI), Data Warehousing, Data Mining, and Big Data are presented in the introduction.…

A liquid petroleum storage facility (Terminal), is a platform used to store petroleum products. Terminals plays a strategic role on the oil and gas supply chain. There are three types of terminals: a fully automated terminal, a partially automated terminal and a fully manual terminal. To increase their efficiency and safety in a very competitive…

Insect robots are always amazed by humans due to their ability to fly using a wing flapping mechanism. The butterfly robot was designed in this research based on aerodynamics and aeroelastic especially for designing a flapping mechanism due to its complexity. A butterfly wing structure was designed by considering aerodynamics forces based on assumptions. Aerodynamic…

In the software engineering research, several works focus on advantages of multi-modeling, which facilitate modeling a system by separating of concerns. The Model Driven Engineering approach relies on model to design software artefacts during the software development lifecycle. Handling such models involves describing some model management operators like ‘ composition ‘. That is an operation…

This work describes a case study carried out in an automotive company. The main objective was to increase the productivity of the last workstation of an assembly line by implementing an AGV System to transport finished goods to the warehouse. A comprehensive analysis of Value Added and Non-Value Added activities were performed to understand the…

In this paper, we would like to discuss the methods and ideologies used to create a database to be used for Human Resource purposes. Because we want this database to be accessible anywhere at any time, it is safe to conclude that an internet-based (web-based) database would work best, therefore we chose MySQL as the…

Through the Electrical Discharge Machining, the temperature is very high, which can lead to the material phase’s transformation and affects material properties, which can lead to failure of the products in the industry. This study aims to investigate the effect of a new input parameter (pulse cycle time Tc), with other parameters on the EDM…

Software is the primary and indispensable entity in our technologically driven world. Therefore, quality assurance, and in particular software testing, represents a vital component in the software development cycle. Throughout the years, many tools have been developed to collect metrics of software that had been implemented. These tools have some differences but continue to play…

Wireless sensor networks (WSNs) are considered to be the currently flourishing scientific domain, thereby found to be applicable in numerous industrial and domestic applications. As per the mathematical results in Pulse-coupled oscillator (PCO), it has been predicted that, numerous iterations are needed for convergence, leading to increased power consumption. Biologically inspired solutions are greatly applicable…

The Malaysian government has recently announced to increase the share of renewable energy generation from 2% to 20% of the total electricity consumption by year 2030. However, integrating a significant level of renewable energy sources on the distribution network without proper coordination will cause adverse effects that leads to unnecessary operation costs to the stakeholders.…

With the advancement in the field of Internet-of-Things (IoT), event monitoring applications have rapidly evolved from a simple event data acquisition towards predictive event analytics involving multi-sensory data aggregation in a distributed environment. Existing event monitoring schemes are mainly relying on ine_cient centralized processing mechanism, which may lead to the common single-point of failure for…

The purpose of this work is to present new technology in acquiring energy from the compact fluorescent lamp (CFL) and store it in a super-capacitor to operate the emergency exit lights. Many studies show energy-efficient light bulbs may emit harmful radiation. This type of lamp emits high levels of radiation, causing migraine headaches, fatigue, and…