Search Results

This was a study on the behavior of a confined masonry bearing wall in a medium height dual building. This wall had to be placed at one corner of the building. It had to be a masonry wall, not to be too stiff and drag the rigidity center too far from the building’s center. The…

This is a study on a confined masonry slender walls building in a high seismic area. The structure also contains frames, but the walls bear most of the gravity and seismic loads. The building will be used as a school. It will be built in Bucharest, Romania. It contains a ground floor and 2 stories…

This is a study on non-bearing masonry walls, in a high, reinforced concrete walls building. It will be built in Bucharest, Romania. This is a high seismic area. The building will be used as a dwelling. The structure is composed of a ground floor and 10 stories above. It is interesting to see the interaction…

Mental health disorder is becoming a social problem, and there is a need for technology that can easily check for states of stress and depression as a countermeasure. Conventional methods of diagnostic support and screening include self-administered psychological tests and use of biomarkers. However, there are problems such as burden on subjects, examination costs, dedicated…

Noise defined as ‘a sensation of unwanted intensity of a wave’, is perception of a pollutant and a type of environmental stressor. The unwanted intensity of a wave is a propagation of noise due to transmission of waves (viz. physical agents) such as light, sound, heat, electricity, fluid and fire. The characterization of noise interference,…

The aim of this paper is to derive and study a full-bridge three-port converter. Based on the standard design of full-bridge converter, we have modeled and derived a three port converter. The three port converter can be used in renewable energy scenarios, such as solar cells or wind turbines connected to the input port. The…

The energy marathon is becoming increasingly based on renewable sources, whereas the continuous decrease on the cost of energy production has supported in last decade, for instance, the development of large-scale offshore wind applications. The consistency and availability of the AC-working equipment portfolio is only limited by physical application boundaries, which are quite evident in…

This paper, presents the design of a temperature sensor based on RO (Ring Oscillator) in order to make a thermal study for the detection and localization of thermal peaks in a complex system. In this work, a simulation and FPGA implementation of a fully digital temperature sensor features a number of exact inverters that can…

This paper analyzed wind loading responses of Aluminum Wall cladding panels in Tall Building using Ikeja Lagos State Nigeria. The wind loads were calculated according to Standard and Specification From BS6399-2:1997 Using the wind speed data of Lagos state Nigeria and finite element analysis, we predicted the responses of these Aluminum wall Cladding panels to…

Command and control (C2) systems direct operators to make accurate decisions in the stressful atmosphere of the battlefield at the earliest. There are powerful tools that fuse various instant piece of information and brings summary of those in front of operators. Threat evaluation is one of the important fusion method that provides these assistance to…

The build-in internet-controlled functions of smart devices such as smart phone, smart television, home healthcare gadget, etc., have made them quite attractive to many segments of consumers. In recent years mankind has witnessed an upsurge usage of such devices for numerous purposes. In this paper, the author is going to show how previously forecasted security…

In-elastic recovery behavior of seamless tube material has been investigated by uniaxial tensile tests. Unloading Stress–Strain curves obtained under different passes of cold drawing process shows that the percentage of in-elastic recovery to the total recovery increased with plastic deformation. This paper is an experimental study that shows Young’s Modulus decreases with plastic strain for…

In this paper first discussion approach will stress out the integration of model predictive control in maximum power point tracking MPPT and as progressing a second approach identified as fuzzy logic controller FLC and perturb & Observe P&O algorithms are analyzed. All are interrelated to MPPT model for a photovoltaic module, PVM, to search for…

Purpose: To conduct preliminary research for developing a program to enhance resilience, a topic that has generated attention of late. Methods: We compared the Structured Association Technique (SAT) resilience program and an exercise program. The citizen’s lecture on stress management occurred 1 month after East Japan Earthquake, and the intervention was carried out in the afternoon of…

The effects of abnormal voltages on power system equipment and appliances in the home have raise concern as most of the equipments are very expensive. Each piece of electrical equipment in an electrical system needs to be protected from surges. To prevent damage to electrical equipment, surge protection considerations are paramount to a well designed…