Search Results

In this paper, we present a new method to deduce minimal cut sets depending on the minimal path sets of the complex systems (networks) to generate the Incidence Matrix, and then compared it with the truth table of the system. This comparison, based on some algebraic properties, gives minimal-cut sets of the complex network with…

This paper examines the impact of innovation on the performance of manufacturing enterprises in Vietnam. Innovation is measured by product innovation (3 observed variables), technology innovation (8 observed variables), and organization innovation (6 observed variables) while firm performance is measured by revenue and profit. The OLS regression model was used with data collected from 806…

The effect of the moving dispersive conducting complex scatterer on the scattering of incident H-wave is investigated herein. In this research, a simulation shows how the scattered phase and magnitude of a moving (rotating and translating) circular cylinder with higher conductivity, made of dispersive material, is affected in the case of incident H-wave (TE-mode) polarization.…

Stop and Wait (SW) ARQ, Go Back N (GBN) ARQ, and Selective Repeat (SR) ARQ are the main ARQ (Automatic-Repeat-reQuest) protocols used to ensure reliable delivery of digital data at correct sequence. These protocols are implemented at the DLC (Data Link Control) sub layer of Data Link Layer (DLL) of OSI (Open System Interconnection) network…

Due to high failure rates many students end up spending unnecessary years struggling to qualify and subsequently accumulate unnecessary debt. In this paper, our principal contribution is to provide an expert system that statistically predicts the success of a first year student in an undergraduate Science programme given only academic merit in their subject matter.…

This study aims to review English as a foreign language learning students’ perception of blended learning on various aspects of learning process. The study seeks to answer the question as to whether there is any correlation among students derived independent variable and their perception with respect to the merits and demerits of online blended learning.…

This paper extends the gamification interactive typing for Primary School Visually Impaired in Indonesia with some development according to previous user’s feedback. This study focuses in to renew the application and evaluate the updated application for visually impaired children developed by utility Unity software. Besides, standards of good gamification are worthy of study and can…

This investigation deals with the identification of the suitable empirical models for predicting radio wave propagation path losses in Erbil city of Kurdistan region in Iraq. For this purpose, two sites of Korek Telecom operating at 1800 MHz and 2100 MHz have been selected at urban and sub-urban environments in the city and seven different…

Estimation of displacement is an information required for daily operation monitoring systems to monitor human health or to locate users in buildings, basements, tunnels and similar places which under the same conditions that the global positioning signal (GPS) level is from very weak to completely absent; and is the measurement technique by using multimetric data…

This paper presents a comparative study for using the classic networks in remote sensing images classification. There are four deep convolution models that used in this comparative study; the DenseNet 196, the NASNet Mobile, the VGG 16, and the ResNet 50 models. These learning convolution models are based on the use of the ImageNet pre-trained…

Brain tumors are a type of tumor with a high mortality rate. Since multifocal-looking tumors in the brain can resemble multicentric gliomas or gliomatosis, accurate detection of the tumor is required during the treatment process. The similarity of neurological and radiological findings also complicates the classification of these tumors. Fast and accurate classification is important…

This paper is an extension of Novel Flexible Chip-less Bow-Tie RFID tag in which we presented the design, testing and fabrication of the tag and compared the results with Octagonal Chipless RFID tag. The chipless RFID tag was designed by using simulation software CST microwave studio and fabricated by using laser etching technique on a…

Information on alternative technologies or new prototypes was analyzed to help improve the quality of business management services. The problem is the lack of application of new technologies that improve the quality of service and reduce disagreements in the management of organizations. The objective is to present a prototype for the management of engineering and…

Feature extraction is an important process in image classification for achieving an efficient accuracy for the classification learning models. One of these methods is using the convolution neural networks. The use of the trained classic deep convolution neural networks as features extraction gives a considerable results in the remote sensing images classification models. So, this…

This study primarily aims to identify the factors that helped emo kids in 2010 move through the emo-identity discrimination and be able to obtain a certain level of achievement. Facebook is the social network that allows users to track friends’ posts back over 10 years. Content analysis was conducted by using two coders to rate…

The study aims to demonstrate how the use of the design process can align a brand’s strategy with the interests of its target audience through a digital product based on a case study. Currently, Lexus internal studies show that there is a possibility to meet the needs of new audiences, beyond the traditional ones (men,…

Increased recycling of PVC has become a requirement in industrial and scientific research level. Several studies will be realized. To confirm and check the recycled materials performance, it will be important to go through numerical modeling, which consists not only in validating the results of the experiments, but also in predicting what happens when the…

A rarefied gas flow is modeled inside two cases of triangular lid-driven microcavity using single (SRT) and multi-relaxation time (MRT) lattice Boltzmann approaches. In the first one, the right angle is in the top-left corner and the upper wall moves with positive horizontal velocity. However, in the second case, the right angle is in the…

In the last decade, deep learning(DL) has witnessed excellent performances on a variety of problems, including speech recognition, object recognition, detection, and natural language processing (NLP) among many others. Of these applications, one common challenge is to obtain ideal parameters during the training of the deep neural networks (DNN). These typical parameters are obtained by…

Previous study of butterfly life-cycle algorithms (BLCA) has been done to construct a novel algorithm by impersonating the life-cycle of a real butterfly. The algorithm was tested in measuring the company’s growth performance using a balanced scorecard (BSC) strategic planning model. This paper is proposed to continue the previous study by expanding the concept in…

In this industry 4.0 and digital era, we are more dependent on the use of communication and various transaction such as financial, exchange of information by various means. These transaction needs to be secure. Differentiation between the use of benign and malware is one way to make these transactions secure. We propose in this work…

The paper is devoted to the presentation of a new methodological approach (new philosophy) to the formulation and solution of directed search and synthesis of electromechanical objects for a given function problems. The object under the study is a class of electrical machines and electromechanical devices which operation is carried out with a variable structure…

A distribution company in Mexico covers the travel expenses for 21 sales representatives. Currently, the routes they follow are not established clearly, which can lead to high costs in this subject. A reduction of such cost is sought after, by optimizing the routes for each one of them. The following research finds an improvement on…

There is some agricultural equipment for post harvesting of Orange fruit Juice, all the machine is geared towards extraction of the fruit juice. Fruit juice extraction is the act of wringing out the juice content of fruits by way of an effective processing and storage which enhance reduction in wastage. Fruit juices which literally have…

Contextual continuous word representation showed promising performances in different natural language processing tasks. It stems from the fact that these word representations consider the context in which a word appears. But until recently, very little attention was paid to the contextual representations in Arabic question classification task. In the present study, we employed a contextual…