Induction motors (IM) are used widely in high energy applications where high torque is required such as ships/ aircrafts manufacturing industry. Those motor drivers are populated in many advantages especially their wide control strategies. However, new technology is invented for enhancing efficiency and smoothing the torque curve by increasing number of phases in the motor…

This article aims at comparing two controls to follow the maximum power point, making use of DC-DC converters for PV uses. All transformers operate continuously. To fulfil maximum power, we will exploit two MPPT controls: a traditional perturb – observe ‘P&O’ and a smart one – the fuzzy logic ‘FL’. The goal of this article…

A significant problem of routing protocols in the Flying Ad Hoc Networks (FANET) is a significant overhead cost due to the high mobility of networking nodes. The problem is caused by a need to send information messages about locations of unmanned aerial vehicles (UAVs). In order to reduce the amount of service information, the following…

In this article supervised classification methods for the analysis of local Panamanian rice crops using Near-Infrared (NIR) spectral signatures are assessed. Neural network ( Multilayer Perceptron-MLP) and Tree based (Decision Trees-DT and Random Forest-RF) algorithms are used as regression and supervised classification of the spectral signatures by rice varieties, against other crops and by plant…

Industry 4.0 implementation stipulates effective actuator control. In the present work, a complex order PIa+jb Dc+jd (COPID) controller was designed for a fractional order model of a direct current (DC) motor system. For comparisons, the DC motor system model was also controlled using the conventional proportional integral (PI), proportional integral derivative (PID), proportional resonant (PR) and fractional…

Compared to other types of autonomous vehicles, the single-seat is the simplest when designing, since its compact design makes it an option that can simplify different mechanical aspects and enhance those of greater importance such as the steering and the braking system. Likewise, the electronic and electrical design may be a great improvement on the…

Vehicle number plate detection and recognition is an integral part of the Intelligent Transport System (ITS) as every vehicle has a number plate as part of its identity. The quantity of vehicles on road is growing in the modern age, so numerous crimes are also increasing day by day. Almost every day the news of…

The web documents are automatically interacting to discover the information by web mining, which is one of the applications of Cloud Computing (CC) technologies. These documents may be in the form of structured, semi-structured, or unstructured formats. In current web technologies, the Semantic Web is an extension for better enabling the people and computers to…

Worldwide, the epidemiological situation is constantly changing and with the exponential increase in the number of confirmed coronavirus cases, the number of health care workers has decreased significantly and this is due to the direct and daily contact of patients. One of the major challenges of the last few months is to prevent the spread…

This paper describes a qualitative research design adopted in this study guided by deployment of a Grounded Theory (GT) methodology which was deployed to synthesize literature on technology adoption and digital transformation with an objective of developing theory. The philosophical worldview adopted was interpretivism/constructivist of a qualitative grounded theory inductive (theory building) approach where secondary…

Rated a high-risk cyber-attack type, Advanced Persistent Threat (APT) has become a cause for concern to cyber security experts. Detecting the presence of APT in order to mitigate this attack has been a major challenge as successful attacks to large organizations still abound. Our approach combines static rule anomaly detection through pattern recognition and machine…

Consideration of building energy performance in the early stage of the design process is very important to help minimizing energy consumed by the built environment. Therefore, help in minimizing energy crisis problem. Optimization of building form and orientation at the early stage of the design process can save a significant amount of energy consumed by…

Forecasting the gold price movement’s volatility has essential applications in areas such as risk management, options pricing, and asset allocation. The multivariate model is expected to generate more accurate forecasts than univariate models in time series data like gold prices. Multivariate analysis is based on observation and analysis of more than one statistical variable at…

The wide acceptance of the semantic web language RDF for ontologies creation in various application fields has led to the emergence of numerous RDF data processing solutions, the so-called triplestores, for the storage of RDF data and its querying using the RDF query language SPARQL. Such solutions are however developed under various perspectives and on…

The control of the air-fuel ratio (AFR) is critical for the efficiency of the combustion. This is for achieving the better performance of the plant and result in high output energy. Computation of the AFR is gone considering the composition of the fuel regardless of the inlet pressure, density ad temperature of both fuel and…

In view of the current short-term traffic flow prediction methods that fail to fully consider the spatial correlation of traffic flow, and fail to make full use of historical data features, resulting in low prediction accuracy and poor robustness. Therefore, in paper, combining Non-negative Matrix Factorization (NMF) and LSTM model Based on Attention Mechanism (AttLSTM),…

Software maintenance contributes the majority of software system life cycle costs. However, existing approaches with automated code analysis are limited by accuracy and scope. Using human-assessed methods or implementing quality standards are more comprehensive alternatives, but they are much more costly for smaller organizations, especially in open- source software projects. Instead, bugs are generally used…

This paper is an extension of previous research that has been done on factors affecting digital payment adoption in the UAE. This study focuses on analyzing which relevant demographic factors affect new e-payment technologies, mainly in the smart city Dubai, with more complexities and dynamics of variables that affect users’ behavior toward adopting new technologies.…

This paper describes an experimental setup that employs ultrasound to scan an area. This method utilizes ultrasonic waves to scan the surface of a submerged object in a water-coupled medium. A pulse-echo mode is used, and quantitative data are collected at various positions using a two- dimensional automated table. A microcontroller controls the motion of…

The literature shows a growing interest in taking into account human and organizational factors (HOFs) to achieve safe and successful human performance by reducing the risk of errors. In this sense, the concept of maturity models aims to help companies in the integration of these factors by assessing the current level of maturity and define…

The behavior of rivers’ hydrology and flow under changing climate has been an objective of interest for long time. In this study the impacts of climate change on streamflow of the Arkansas River will be investigated. The paper is an extension of work originally presented in ASET conference in Dubai. The Arkansas River is a…

This study tests the feasibility of manufacturing concrete blocks made of recycled materials. The paper is an extension of work originally presented in ASET conference in Dubai. The paper, depicts and analyzes how the characteristics of the blocks (strength/durability) are affected by the presence of recycled concrete ingredients (recycled aggregate (RA)) and recycled water (RW).…

Robotic arms or industrial robots are a machinery that is widely used in the medical and military industries because it is a flexible, highly accurate and reliable. It is very necessary to work in complex tasks requiring more accuracy than humans can work. This paper presents an estimate of the standard uncertainty of 6 DOF…

A sensor fusion concept integrating the optical and microfabricated eddy-current sensor for the non-destructive testing of the grinding burn is reported. For evaluation, reference grinding burn with varying degrees are fabricated on 42CrMo4 tool steel cylinder. The complementary sensing nature of the proposed sensors for the non-destructive testing of the grinding burn is successfully achieved,…

This manuscript intending to publicize the improvements incorporated in the BrcLightning application, including the Risk Analysis module with the help of a pop-up, which provides the result and assists in the identification of mitigating measures by the professional, which must be defined to reduce the calculated risks. Other points addressed in this extension are the…