Within the results of scientific research, vibrations and their reduction have been described for the brushless direct current motor with permanent magnets (BLDC motor). In this paper, calculations (the finite element method using commercial Finite Element Software Ansys) and measurements were performed to identifying the sources of vibrations in BLDC motor. The article presents numerical…

Coordinated MultiPoint (CoMP) has been introduced for LTE-Advanced system to overcome the inter-cell interference problems and enhance the signal quality of cell-edge UEs (User Equipments). With such concept, the overall system performance should be improved considerably to support the significantly increasing amount of demand on data transmission via mobile communication that happens nowadays. Dynamic Point…

In the Internet of Things era it is expected that low-end processor domination of the embedded market will be further reaffirmed. Then, a question will arise, on whether it is possible to enhance performance of such processors without the cost of high-end architectures. In this work we propose a better-than-worst-case (BTWC) methodology which enables the…

This work is concerned with the detection and classification of birds that have applications like monitoring extinct and migrated birds. Recent computer vision algorithms can precise this kind of task but still there are some dominant issues like low light, very little differences between subspecies of birds, etc are to be studied. As Convolution Neural…

Music Emotion Recognition (MER) is a study to recognize emotion in a music or song. MER is still challenging in the music world since recognizing emotion in music is affected by several features; audio is one of them. This paper uses a deep learning approach for MER, specifically Convolutional Neural Network (CNN) and Convolutional Recurrent…

The article substantiates the relevance of conducting research on the structural characteristics of a company’s employee knowledge, which is the result of his mental activity and his practical experience. The conditions under which information becomes a source of employee knowledge are determined. An abstract analysis of the process of transforming knowledge into an intellectual product…

Protecting the rights and interests of shareholders is the important research topic. This study takes ” Tatung Operation Rights Competition” as an example to execute case study. Game tools are applied to analyze which corporate supervision strategies should be used by government. The research and analysis results show that both the corporate group and the…

A Japanese method in teaching at classroom show good result by implementing Kamishibai. On the other hand, technology is inseparable from daily life. Computer-based learning media innovations are fast and diverse, ranging from 2D animation to 3D environments. The hologram is one example of 3D object visualization to deliver the learning material. Based on Kamishibai’s…

Induction motors (IM) are used widely in high energy applications where high torque is required such as ships/ aircrafts manufacturing industry. Those motor drivers are populated in many advantages especially their wide control strategies. However, new technology is invented for enhancing efficiency and smoothing the torque curve by increasing number of phases in the motor…

The Public Administration is forced to transform itself by taking advantage of the contribution of ICT to in the process of reducing bureaucracy and increase transparency, promoting the dematerialization of processes, increasing the quality of online services, allowing greater ubiquity of access, reducing response times, in the search for improvement of the quality of life…

Industry 4.0 implementation stipulates effective actuator control. In the present work, a complex order PIa+jb Dc+jd (COPID) controller was designed for a fractional order model of a direct current (DC) motor system. For comparisons, the DC motor system model was also controlled using the conventional proportional integral (PI), proportional integral derivative (PID), proportional resonant (PR) and fractional…

Automatic Speech Recognition (ASR) technology has the potential to improve the learning experience of students in the classroom. This article addresses some of the key theoretical areas identified in the pursuit of implementing a speech recognition system, capable of lesson summary generation in the educational setting. The article discusses: some of the applica- tions of…

The article suggests four circuit topologies for the practical simulation of grounded and floating lossy inductors. All the suggested circuits use commercially available integrated circuit LT1228 chips as active elements, and only two passive elements, namely one resistor and one capacitor. The first two of the proposed circuits employ only a single LT1228 active element…

South Africa is aiming to achieve a generation capacity of about 11.4GW through wind energy systems, which will contribute nearly 15.1% of the country’s energy mix by 2030. Wind energy is one of the principal renewable energy determinations by the South African government, owing to affluent heavy winds in vast and remote coastal areas. In…

To this extent, the delineation of techno-economic evaluations for transformers becomes more intricate through a lens of Distributed Solar Photovoltaic (DSPV) market in South Africa. Essentially, the transformer price and loss evaluation techniques should be tailored for calculating the Total Ownership Cost (TOC) of transformers facilitating decentralized energy systems. In South Africa, the traditional coal…

On the 11th of March 2020, the World Health Organization (WHO) declared COVID-19 as a pandemic. Part of controlling measures of the pandemic is to understand the disease’s trajectories. There are several possible interventions that can prevent and control its spread. Determining an optimal strategy is critical for policymakers to understand the impact of different…

Vehicle number plate detection and recognition is an integral part of the Intelligent Transport System (ITS) as every vehicle has a number plate as part of its identity. The quantity of vehicles on road is growing in the modern age, so numerous crimes are also increasing day by day. Almost every day the news of…

The security of website application has become important in the last decades. According to the Open Web Application Security Project (OWASP), the SQL Injection is classified as one of the major vulnerabilities found in web application security. This research is focused on improving website security in dealing with SQL Injection attacks by stopping, monitoring, and…

This study has two objectives: to determine the level of readiness of first-year undergraduate students at the Universitas Indonesia (UI) and to investigate student’s perception of MPKT (Integrated Character Development course) lecturers’ readiness to manage online learning class. Proportional cluster sampling was applied, and 1466 freshmen from thirteen faculties participated. Data clustering and imputation of…

The purpose of this study is to determine the improvement of the competence of junior high school students through the application of blended learning models. This is a Classroom Action Research comprising of two cycles and two observations of student activities, with the descriptive statistics used for data analysis. From the results of the learning…

This paper aims to measure the acceptance level of Indonesian customers to JD.ID X retail and to reveal the driving factors of behavioral intention to shop at the retail. JD.ID X is new retail that implements a new shopping technology called Just walk-out technology (JWOT) also known as retail without a cashier. JWOT is one…

Distribution is the main activity in integrated product supply chain management. In the pharmaceutical industry, the process of drug distribution is important because of the handling, storage, and distribution of medicinal products with good standards and quality. The problem that occurs in the pharmaceutical industry is the circulation of counterfeit drugs by related parties, for…

The present work focuses on the effect of adding gum Arabic on the setting time of cement pastes, workability, and compressive strength of concrete. For workability and compressive strength liquid gum Arabic was added to concrete mixes at ratios of 0.0% (control mix), 0.3%, 0.5%, 0.7% of the weight of cement. In addition, from 0.1%…

The wide acceptance of the semantic web language RDF for ontologies creation in various application fields has led to the emergence of numerous RDF data processing solutions, the so-called triplestores, for the storage of RDF data and its querying using the RDF query language SPARQL. Such solutions are however developed under various perspectives and on…

Artificial Intelligence (AI) is a promising trend in ship energy management systems (EMS). The motivations of this work are designing and implementation of an intelligent energy management system for ship’s electric power system based on an adaptive Neuro-Fuzzy Inference System (ANFIS) and the ship power source is an environmental friend system consists of proton exchange…