The purpose of this study is to investigate the effects of integrated content and English education. To fulfill this, 30 studies conducted in elementary school setting matching the meta-analysis criteria, such as being quantitative, experimental, or having affective statistical results after searching for the key words of “content-based”, “theme-based” and “integrated learning” on the accessible…

Epilepsy is a neurological disorder which is most widespread in human beings after stroke. Approximately 70% of epilepsy cases can be cured if diagnosed and medicated properly. Electro-encephalogram (EEG) signals are recording of brain electrical activity that provides insight information and understanding of the mechanisms inside the brain. Since epileptic seizures occur erratically, it is…

Network security is often built on perimeter defense. Sophisticated attacks are able to penetrate the perimeter and access valuable resources in the network. A more complete defense strategy also contains mechanisms to detect and mitigate perimeter breaches. Deceptive systems are a promising technology to detect, deceive and counter infiltration. In this work we provide an…

This paper introduces a kind of novel backstepping phase- locked loops (PLL). The paper presents a developed theoretical model of (PLL) frequency synthesizer and provides analytical equations for calculating the desired specification such as phase margin (PM). The proposed model aims to improve the control accuracy, ensure stability and reducing the lock time. Adaptive controller…

In automated working environments, mobile robots can be used for different purposes such as material handling, domestic services, and objects transportation. This work presents a grasping and placing operation for multiple labware and tube racks in life science laboratories using the H20 mobile robots. The H20 robot has dual arms where each arm consists of…

Mobile robots can be used to perform transportation tasks for different objects. These tasks have to be implemented carefully. Therefore, an accurate approach for object recognition and position estimation is required. This work presents a concept for identification and position estimation of multiple labware. These labware, which contain chemical and biological components, have to be…

Line start permanent magnet synchronous motor (LSPMSM) is one of the highest efficiency motors due to no rotor copper loss at synchronous speed and self-starting. LSPMSM has torque characteristics of both induction motor IM and Permanent Magnet Synchronous Motor-PMSM. Using Genetic Algorithm (GA) for balancing magnetic cost and for copper loss minimization, the magnetic sizes…

A  comparative  study  between  adaptive  consensus  control  of multi-agent systems composed of fully actuated mobile robots which are described as a class of Euler-Lagrange systems on directed network graphs based on the notion of inverse optimal H∞ control criterion (Controller I), and the similar control strategy without H∞ control criterion (Controller II), is given in this paper.…

Conformal metalization on mold compound offers new possibility for IC package design to improve features such as rigidization of the flexible core, heat sink capability, 3D-circuit patterning and the electromagnetic interference (EMI) shielding. With the unique processes, the fabrication technology had enabled to achieve the high reliable performance and had passed the electrical test. Following…

A3S(Arwin-Adang-Aciek-Sembiring) is a method of information fusion at a single observation and OMA3S(Observation Multi-time A3S) is a method of information fusion for time-series data. This paper proposes OMA3S-based Cognitive Artificial-Intelligence method for interpreting Transformer Condition, which is calculated based on maintenance data from Indonesia National Electric Company (PLN). First, the proposed method is tested using…

This work is dedicated to present a new pipeline-parallel architecture of Discrete Wavelet Packet Transform (DWPT) for all wavelet family implemented in FPGA technology. The main target of our architecture is to provide an effective performance trade-off, where it significantly increases the throughput with a restricted amount of hardware. In this article, we propose two…

Rotary cutting of electrical steel laminations is a novel, promising alternative in the processing of electrical steel strip with enormous economical and technical potentials. This paper is an extension of work originally presented on the 6th International Electric Drives Production Conference (E|DPC) in Nuremberg, Germany 2016. The scope of this paper includes a theoretical description…

This paper presents the modeling and simulation of the voltage unbalance in the power supply system of an AC electrified railway. The operating voltage at the traction substation is obtained by MATLAB/SIMULINK program and the voltage unbalance is evaluated by considering the voltage unbalance factor (VUF). Suvarnabhumi Airport Rail Link (ARL), in Bangkok, Thailand, is…

The research in Neuro-Prosthetics is gaining more significance and popularity as the advancement in prosthetics control allows amputees to perform even more tasks. Indeed, the improvement of classification accuracy is a challenge in prosthetics control. In this research, a system is developed in order to improve the multiclass classification rate. Two classifiers namely Artificial Neural…

This paper presents a full wave active rectifier for biomedical implanted devices using a new comparator in order to reduce the rectifier transistors reverse current. The rectifier was designed in 0.13μm CMOS process and it can deliver 1.2Vdc for a minimum signal of 1.3Vac. It achieves a power conversion efficiency of 92% at the 13.56MHz…

Greenhouse cultivation is easy to keep up and control important factors such as light, temperature, and humidity. Using of sensors and actuators in the greenhouse to capture different values allows for the control of the equipment, it can also be optimized for growth at optimal temperature and humidity of various crops planted. We use wireless…

A new method to detect heart sound that does not require machine learning is proposed. The heart sound is a time series event which is generated by the heart mechanical system. From the analysis of heart sound S-transform and the understanding of how heart works, it can be deducted that each heart sound component has…

The discussed system in this paper uses the Kinect’s 3D input (acquired through IR projector and Camera) to detect gestures and then based on these gestures perform certain tasks, and display certain results on an output screen. The programming language used here is the Processing open source software and a database was implemented to manage…

This paper proposes a method for estimating the spectral reflectance of Neugebauer primaries or eight basic colors when the spectral reflectance data of several colors are given. The proposed method is based on Neugebauer model, which expresses an arbitrary color as a weighted average of Neugebauer primaries, and its sparse version called sparse Neugebauer model.…

For human comfort and convenience, appropriate temperature values may not be sufficient enough for the environment that they live in. The moisture content of the air has an important place in this regard. 30% to 65% humidity is desireable for a relaxed and comfortable life. Humidity in the environment is fundamental for the human health,…

The concept of renewable energy is increasing day by day because the electrical applications are moving towards utilization of renewable sources and due to this factor electric power is also gaining ground and new type of converters are modelled in order to get high utilization of renewable sources. In this paper, two types of multiport…

The increase of textual information published in Arabic language on the internet, public libraries and administrations requires implementing effective techniques for the extraction of relevant information contained in large corpus of texts. The purpose of indexing is to create a document representation that easily find and identify the relevant information in a set of documents.…

Recently, the field of prosthetics has seen many accomplishments especially with the integration of technological advancements. In this paper, different arm types (robotic, surgical, bionic, prosthetic and static) are analyzed in terms of resistance, usage, flexibility, cost and potential. Most of these techniques have some problems; they are extremely expensive, hard to install and maintain…

Extensive increases in electricity cost added to the numerous power outages encountered in developing countries has led to the deployment of hybrid energy supplies that mainly ensure continuity of power supply while attempting a reduction of electricity generation cost. This paper, specifically deals with the cost optimization of electricity generation from a grid connected hybrid…

These last years, the amount of data generated by information systems has exploded. It is not only the quantities of information that are now estimated in Exabyte, but also the variety of these data which is more and more structurally heterogeneous and the velocity of generation of these data which can be compared in many…