Search Results

This paper presents a low voltage, low power, fast settling switched capacitor based Proportional to Absolute Temperature (PTAT) current reference circuit. Unlike in a conventional resistor based PTAT current source, the proposed circuit saves a significant amount of silicon area on chip and hence the circuit becomes less susceptible to process variations. It creates a…

Low power OTAs are the most preferred circuits in the realization of continuous time filters of analog front end of wearable healthcare devices. A low transconductance OTA with series parallel current mirror to realize large time constant of the filter is designed. The differential pair of the OTA uses bulk driven PMOSFETs and the subthreshold…

This paper uses the RC-triggered MOSFET-based electrostatic discharge (ESD) power clamp to conduct ESD from ESD events and not affect the ultra-low power sensor system. Then using the stacked device include stacked MOSFET or stacked BJT to reduce the leakage current which increases with temperature. Moreover, we compare gate-driven method and two-level–driven with both gate-driven…

The basic processes like addition, subtraction can be done using various types of binary adders with dissimilar addition times (delay), area and power consumption in any digital processing applications. To minimize the Power Delay Product (PDP) of Digital Signal Processing (DSP) processors is necessary for high performance in Very Large Scale Integration (VLSI) applications. In…

Integration of Distributed Generation (DG) on distribution networks has a positive impact which includes the following: low power losses, improved utility system reliability and voltage improvement at buses. A real distribution network is radial in which energy flow is unidirectional from generation to transmission and from distribution to the load. However, when a DG is…

The Internet of Things (IoT) application has been experiencing increasingly progressive demand, especially for embedded devices (ED). However, the ED has limited capabilities, low power consumption resources, and low bandwidth in connecting to the Internet by using Wireless Sensor Networks (WSNs). Therefore, the WSNs form creates a necessity for new technologies and protocols for the…

Oscillator phase noise (PN) has a strong impact on the spectral purity of the RF signal in wireless systems and is, therefore, a main challenge when designing a local oscillator. In this paper, we propose a new approach for designing a low PN oscillator based on the Time-Invariant Linear Model of phase noise. It leads…

In advanced technologies nodes, starting from 28 nm to 7 nm and below, the power consumed of integrated circuits (ICs) becomes a big concern. Consequently, actual electronic design automation (EDA) tools are facing many challenges to have low power, reduced area and keep having required performance. To reach required success criteria, and because each picosecond…

Power consumption is becoming more and more important in the Internet of Things (IOT). The ADC is the main power hungry in multi-sensor electronic systems and effectively reducing ADC power consumption without affecting ADC characteristics is an important. This paper is extended from the conference paper. The segmented SAR ADC presents reconfigurable 9 to 12-bit…

A switched capacitor low-pass filter employing folded-cascode CMOS OP Amps with a dynamic switching bias circuit capable of processing video signals, which enables low power consumption, and operation in wide bandwidths and low power supply voltages, is proposed. In this filter, charge transfer operations through two-phase clock pulses during the on-state period of the OP…

To effectively implement the social distancing or digital contact tracing in epidemic using an RSSI-based localization approach through Bluetooth beacon is one of the most widely used technologies, but simply using RSSI measurement is not more relevant because the RF signal is affected by several factors and the environment of usage. Traditional distance or positioning…

A new approach for designing RF energy harvester with a single stage converter circuit is presented in this paper. The proposed converter configuration is integrated with an antenna that is based on the coplanar waveguide (CPW) transmission line with improved gain resonated at 2.45 frequency ISM band. The CPW patch antenna as a harvester antenna…

With the aim of preventing hydro-geological risks and overcoming the problems of current rain gauges, this paper proposes a low-complexity and cost-effective video rain gauge. In particular, in this paper the authors propose a new approach to rainfall classification based on image processing and video matching process employing convolutional neural networks (CNN). The system consists…

With the addition of thing of internet applications to 5G smartphones, mobile standby time and ultra-low-power sensing systems have become increasingly important. Nowadays, such sensing systems typically reduce power consumption to microwatts. This paper presents segmented and non-binary weighted capacitance DACs, low power, high resolution, an asynchronous clock, a spark-detect, vcm-based switching and direct switching,…

The monitoring of environmental parameters is a critical topic in occupational medicine. With advances in technology, during the recent years, the wearable sensors are widely used to evaluate the ambient parameters. In this paper a compact, small, light-weighted, and configurable sensor node in three physical layers for prolonged chemical ambient monitoring is described. The device…

A low-complexity dual-band chirp FSK, direct conversion receiver is described in this paper. The receiver is dedicated to be used in the transceiver unit of a medical implantable wireless sensor. The system uses the RF band between 402 and 405 MHz. Two sub-bands frequencies employing chirped pulses are assigned for both binary information. The novelty…

Wavy FinFET is a hybrid device that integrates FinFET and Ultrathin Body FET technologies on SOI platform to provide high density and drivability without causing area penalty. The problem associated with this device is higher leakage and lower threshold voltage. This problem can be solved by structural modification of the device. This work analyses the…

As a result of rising expectations for quality, the employment of advanced technical requirements for future fifth-generation (5G) new radio is required. The error-correction coding method is one of the most important components of a new generation. The 5G NR New Radio Low-Density Parity Check (LDPC) codes, which have been adopted by the 5G standard,…

In this paper, a portable Frequency Modulated Continuous Wave (FMCW) radar system was designed and implemented for human movements and breathing detection. The radar operates with a frequency band ranges from 4.7 to 4.9GHz. The radar sub-systems were designed and simulated using up to date computer-aided-design tools before implementation. The Voltage Controlled Oscillators (VCO), high…

Using non-invasive and non-contact sensors to measure a person’s presence or movement helps improve the quality of life for both healthy people and patients. In this paper, a method of measuring the presence and motion of a person is proposed by utilizing UWB Impulse Radar, which is low power consumption and safe to radiate to…

In this research paper, the development and evaluating of a smart controller for electrical powered wheelchairs are presented. The controller aimed to assist quadriplegic, paralyzed, and handicap patients who cannot use their hands to drive an electrical wheelchair by using a joystick controller. Two sub control units have been combined in one hybrid system to…

In this paper, we exploit an integration between Compressive sensing (CS) and the random mobility of sensors in distributed mobile sensor networks (MSNs). A small number of distributed mobile sensors are deployed randomly in a sensing area to observe a large number of positions. The distributed mobile sensors sparsely sample the sensing area for data…