Search Results

The energy marathon is becoming increasingly based on renewable sources, whereas the continuous decrease on the cost of energy production has supported in last decade, for instance, the development of large-scale offshore wind applications. The consistency and availability of the AC-working equipment portfolio is only limited by physical application boundaries, which are quite evident in…

This paper describes the design and analysis of a regenerative braking system for a permanent magnet synchronous motor (PMSM) drive for electric vehicle (EV) applications. First studied is the principle for electric braking control of a PMSM motor under field-oriented control (FOC). Next, the maximum braking torque in the regeneration mode as well as the…

The occurrence of many failures in the power system can lead to power instability and affects the system parameters to go beyond its operating limits. It may lead to obstructing the secure operations and reliability of power systems. Ensuring power system security needs proper actions to be taken for the undesirable contingency. Thus, security analysis…

In the current industrial development, an increasing number of sensors is applied for monitoring of any kind of appliances and machines. A predictive mathematical model allows for realistic assessment of the health state of the appliance, indication of service requirements, as well as control of the appliance, serving as so-called digital twin on a control…

This paper presents various concepts related to the application of a microgrid pilot project in a residential condominium at Fortaleza / CE – Brazil, such as battery energy system, renewable and distributed generation, islanding recloser and all different units using interface based on power electronics. This papers main objective is to create information about microgrid…

CdTe-based photovoltaic (PV) cells provide the lowest EBPT (energy payback time) and emit less amount of GHG (green house gases) among different types of PV cells. Thus, it is very essential to enhance the efficiency of CdTe-based solar cells. A high efficiency CdTe/CdS p-i-n heterostructure solar cell is designed and the performance of the cell…

The contemporary electrical power systems (EPS) impose increased requirements for the functionality of the protection systems. The necessity of improved EPS stability is in some extent resulting of the increased integration of renewable sources of electrical energy. The future grid development gives perspective for connection of more converter based generations. The power electronic schemes and…

This paper critically evaluates the operational perspective of Virtual Power Plants (VPP) in Germany by analyzing key factors to replace conventional power plants in the future power system. Therefore, its necessity for the secure operation as well as the technical and economic benefits for the German power system are pointed out. The single sections describe…

The aim of this paper is to study the boundary enlarged gradient controllability problem governed by parabolic evolution equations. The purpose is to find and compute the control \(u\) which steers the gradient state from an initial gradient one \(\nabla y_{_{0}}\) to a gradient vector supposed to be unknown between two defined bounds \(b_1\) and…

The purpose of this conference is to present and analyze di_erent models accounting for the thermal degradation of combustible materials (biomass, coals, mixtures…), when submitted to a controlled temperature ramp and under non-oxidative or oxidative atmospheres. Because of the possible rarefaction of fossil fuels, the analysis of di_erent combustible materials which could be used as…

The efficiency of a plasma-aided finishing process, namely capillary impregnation, can be predicted only by setting two basic parameters of the real wood porous surface and the actual impregnating solution – surface free energy and surface tension. In general, the following processing efficiency parameter was found and the rule is true: “The plasma aided or…

The resolution of the Navier-Stokes and Euler equations by the finite element method is the focus of this paper. These equations are solved in conservative form using, as unknown variables, the so-called conservative variables (density, momentum per unit volume and total energy per unit volume). The variational formulation developed is a variant of the Petrov-Galerkin…

The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM) is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM…

In modern powers systems, one of the most considerable topics is economic load dispatch (ELD). ELD is non-linear problem and it became non-convex and non-smooth problem with some constraints such as valve point loading effect. ELD is very crucial for energy generation and distribution in power systems. For solving ELD problem, a lot of methods…

The SoC estimation of Li Ion batteries presents a difficult task for almost applications in order to ensure their higher energy density and their safety. Hence, there have been several methods to optimize the state of charge of the Lithium cells such as observer strategies which have been considered in this work. Kalman filter observer…

The present article explains the modeling of a Gas Turbine system; the mathematical modeling is based on fluid mechanics applying the principal energy laws such as Euler’s Law, Newton’s second Law and the first thermodynamic law to obtain the equations for mass, momentum and energy conservation; expressed as the continuity equation, the Navier-Stokes equation and…

All multimedia devices now incorporate video CODECs that comply with international video coding standards such as H.264 / MPEG4-AVC and the new High Efficiency Video Coding Standard (HEVC), otherwise known as H.265. Although the standard CODECs have been designed to include algorithms with optimal efficiency, a large number of coding parameters can be used to…

In this paper, Constant False Alarm Rate (CFAR) detection of spatially distributed targets embedded in compound Gaussian clutter with Inverse Gamma texture is addressed. By taking into account the fact that clutter parameters are unknown in practical situations, we propose mean level based on Lookup Tables detectors, that operate as a two-step approach, which consists…

In this work, a compact system for the automatic estimation of the tilt angle at any location of the world is presented. The system components are one computer, one GPS receiver and one Python program. The tilt angle is calculated through the maximization of the flux of direct radiation incident upon a flat solar collector.…

A Linear Wireless Sensor Network (LWSN) is a kind of wireless sensor network where the nodes are deployed in a line. Since the sensor nodes are energy restricted, energy efficiency becomes one of the most significant design issues for LWSNs as well as wireless sensor networks. With the proper deployment, the power consumption could be…

At present in Mexico, the renewable energy has become more important due to the great dependence of the country for fossil fuels. Within the several applications of renewable energy, there are the geothermal applications for the air conditioning of spaces. This technology employs heat pumps that interexchange heat with the ground. This technology is relatively…

A company’s ability to find the most profitable technology is based on a precise forecast of achievement potential. Technology Management (TM) uses forecasting models to analyse future potentials, e.g. the Gartner Hype Cycle, Arthur D. Little’s technology lifecycle or McKinsey’s S-curve model. All these methods are useful for qualitative analysis in the planning of strategic…

Extensive increases in electricity cost added to the numerous power outages encountered in developing countries has led to the deployment of hybrid energy supplies that mainly ensure continuity of power supply while attempting a reduction of electricity generation cost. This paper, specifically deals with the cost optimization of electricity generation from a grid connected hybrid…

Jaw cyst is one of the most common pathology observed in the field of dentistry. Early detection of the cystic lesion will help the surgeons to take appropriate therapeutic measures after a thorough diagnostic procedure. One of the challenging task for surgeons is to differentiate the cysts from the other pathologies. The appearance of these…

One of the most important roles of the wireless sensor networks (WSN) is to avoid wiring costs, be self-sustainable and be able to function for several years. However, due to the slow progress in battery technology, power continues to be a limited resource in wireless sensor communication and electric energy storage remains to be an…