This work describes computerized data acquisition system for current-voltage (I-V) characteristics of diodes. The proposed system consist of a personal computer pre-installed with LabVIEW, two units of power supply, an interface board, current and voltage sensors. Two devices under test (DUTs) are selected namely 1N4007 silicon and 1N34 germanium diodes. The current flow through the…

This paper investigates the efficiency benefits of replacing the Silicon diodes of a commercial IGBT module for the main inverter application of an electric vehicle with Silicon Carbide diodes, leaving the package, operating conditions and the system unchanged. This ensures that the comparison is directly between the chip technologies without any scope for discrepancies arising…

The key objective of this study is to analyse the heat transfer processes involved in the evaporation and condensation of water in a water distillation system employing a thermoelectric module. This analysis can help to increase the water production and to enhance the system performance. For the analysis, a water distillation unit prototype integrated with…

Reliable operation of a power transformer with a certain load depends on the technical condition of individual construction parts and the ability to prevent defects that can cause a failure. During the lifecycle of a transformer, valuable data is constantly accumulated, which forms the basis for technical or risk assessment of the equipment. Therefore it…

Hereby in this paper, we are going to refer image classification. The main issue in image classification is features extraction and image vector representation. We expose the Bag of Features method used to find image representation. Class prediction accuracy of varying classifiers algorithms is measured on Caltech 101 images. For feature extraction functions we evaluate…

This article is devoted to study the existence of solutions for the strongly nonlinear \(p(x)\)-elliptic problem: \(- \Delta_{p(x)} (u) + \alpha_0 |u|^{p(x)-2}u = d(x)\frac{|\nabla u|^{p(x)}}{|u|^{p(x)}+1} + f- div g(x) \quad \text{in } \Omega, \) \(u \in W_0^{1,p(x)}(\Omega), \) Where \(\Omega\) is an open set of \(\mathbb{R}^N\), possibly of infinite measure, we will also give some…

Radio frequency Identification (RFID) is currently considered as one of the most used technologies for an automatic identification of objects or people. Based on a combination of tags and readers, RFID technology has widely been applied in various areas including supply chain, production and traffic control systems. However, despite of its numerous advantages, the technology…

The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM) is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM…

Real estate pressures in modern electronics have resulted in the need for electrically small antennas, which have subsequently garnered interest amongst researchers and industry alike. These antennas are characterized by their largest dimensions translating to a fraction of the operating wavelength; such a diminutive size comes at the expense of reduced gain and efficiency, and…

Crime statistics and research on criminology show that under similar circumstances,crimes are more likely to occur in developing countries than in developed countries due to their lack ofsecurity measures. Transport crimes on highways and bridges are one of the most common crimes in the developing nations. Automation of various systems like the toll collection system…

The discovery of semantic information from complex signals is a task concerned with connecting humans’ perceptions and/or intentions with the signals content. In the case of audio signals, complex perceptions are appraised in a listener’s mind, that trigger affective responses that may be relevant for well-being and survival. In this paper we are interested in…

Cognitive Radio (CR) encompasses a number of technologies which enable adaptive self-programing of systems at different levels to provide more effective use of the increasingly congested radio spectrum. CRs have potential to use spectrum allocated to TV services, which is not used by the primary user (TV), without causing disruptive interference to licensed users by…

In this paper, a secure elevator handling system is presented to enable a flexible movement of wheeled mobile robots among laboratories distributed in different floors. The automated handling system consists mainly of an ADAM module which has the ability to call the elevator to the robot’s current floor and to request the destination floor. The…

Navigation is often performed using the Global Positioning Satellite system. However, the system is not always reliable for use at all times in all contexts. Reliance solely on such systems could endanger a vessel or get people lost. Another approach to provide navigation is to use known landmarks and triangulate one’s position. A navigation solution…

With the increasing integration level of electronic circuits management of the generated heat became one of the most important design aspects. Beside the semiconductor components capacitors are also affected by the elevated temperature. In this paper a new thermal characterization method is proposed adopting the thermal transient measurement technique for capacitors utilizing the capacitance itself…

The build-in internet-controlled functions of smart devices such as smart phone, smart television, home healthcare gadget, etc., have made them quite attractive to many segments of consumers. In recent years mankind has witnessed an upsurge usage of such devices for numerous purposes. In this paper, the author is going to show how previously forecasted security…

Study the content of images is considered an important topic in which reasonable and accurate analysis of images are generated. Recently image analysis becomes a vital field because of huge number of images transferred via transmission media in our daily life. These crowded media with images lead to highlight in research area of image analysis.…

In this paper a novel approach to extract 2D skeleton information (skeletonization) from natural image is proposed. The work presented here is the extension of our previous paper presented at the International Sympsosium on Multimedia 2016. In the past work, a threshold based method is utilized. Here the algorithm is further improved by using a…

In the recent years LepidaSpa created Sensornet platform for the control of the Emilia-Romagna territory managing heterogeneous environmental sensor networks distributed all over the region. LepidaSpa decided to integrate into Sensornet a brand-new family of sensors measuring indoor environmental parameters inside public buildings, in order to monitor energy consumption on one hand and workers’ wellbeing…

This paper presents a developed low cost system for human gait analysis. Two web cameras placed in opposite sides of a treadmill are used to acquire images of a person walking at different speeds on a treadmill, carrying a set of passive marks located at strategic places of its body. The treadmill also has passive…

Jaw cyst is one of the most common pathology observed in the field of dentistry. Early detection of the cystic lesion will help the surgeons to take appropriate therapeutic measures after a thorough diagnostic procedure. One of the challenging task for surgeons is to differentiate the cysts from the other pathologies. The appearance of these…

This paper presents a novel dual-band rectenna for RF energy harvesting system. This rectenna is created from a dual-band antenna and a dual-band rectifier which operates at GSM bands (900 MHz and 1800 MHz). The printed monopole antenna is miniaturized by two meander-lines. The received signal from the receiving antenna is rectified by a voltage…

One of the great challenges in distance-learning is to follow the actions of the teachers/tutors and also the actions of students during the process of teaching and learning. This article presents the FAG Tool integrated with the LMS Moodle was developed to help managers of the Distance Education environment to monitor the actions of teachers/tutors…

In Interactive Learning Environment (ILE), the cognitive activity and behavior of learners are the center of the researchers’ concerns. The improvement of learning through combining these axes as a structure of indicators for well-designed learning environment, encloses the measurement of the educational activity as a part of the learning process. In this paper, we propose…

In this paper, a delay-dependent controller based on the sliding mode concept is proposed to stabilize a networked robotic system in a decentralized synchronization scheme. In addition to being affected by communication time-delays between agents, and seen that external disturbances obviously affect any physical and dynamic system, an unsettling action resulting from measurement errors affects…