Search Results

Log-periodic antennas have high electrical characteristics over a wide frequency range. The large length of the antennas is their significant disadvantage caused by the fact that each active region consisting of several radiators operates in a narrow frequency range. To extend this range, it is proposed to use radiators with concentrated capacitive loads, providing in-phase…

This paper addresses the motion planning problem of Reeds-Shepp-type car-like mobile robots moving among static and dynamic obstacles. If the positions and the velocity vectors of the obstacles are known or well estimated, the Velocity Obstacles (VO) method and its non-linear version (NLVO) can be used to plan a collision-free trajectory for a robot in…

The article considers linear algebra as an alternative mathematical tool of logic synthesis of digital structures to Boolean algebra and synthesis methods of digital electronic component base (ECB) on its ground. The methods of solving the applied problems of logic synthesis are shown, including the expansion of an arbitrary logic function by means of monotonic…

This paper reports the results of an empirical, 3D full wave inversion (FWI) numerical analysis which provides an estimation of the performance of multi-static handheld ground penetrating radar (GPR,) compared to a bi-static system, for landmine detection using FWI imaging. The experiments are based on simulated data and provide a more realistic evaluation of the…

Through-Silicon-Vias (TSVs) are utilized for high density 3D integration, which induce crosstalk problems and impact signal integrity. This paper focuses on TSV crosstalk characterization in 3D integrated circuits, where several TSV physical and environmental configurations are investigated. In particular, this work shows a detailed study on the influence of signal-ground TSV locations, distances and their…

The uncertain nonlinear systems can be modeled with fuzzy differential equations (FDEs) and the solutions of these equations are applied to analyze many engineering problems. However, it is very difficult to obtain solutions of FDEs. In this paper, the solutions of FDEs are approximated by utilizing the fuzzy Sumudu transform (FST) method. Here, the uncertainties…

To advance Java programming educations, we have developed the Java Programming Learning Assistant System (JPLAS) that provides the code writing problem. This problem asks a student to write a source code to satisfy the specification of a given assignment, where the correctness is verified by running test code on JUnit. For a novice student, a…

In this paper, the performance and reliability of oxide-based Resistive RAM (ReRAM) memory is investigated in a 28nm FDSOI technology versus interconnects resistivity combined with device variability. Indeed, common problems with ReRAM are related to high variability in operating conditions and low yield. At a cell level ReRAMs suffer from variability. At an array level,…

This article is devoted to study the existence of solutions for the strongly nonlinear \(p(x)\)-elliptic problem: \(- \Delta_{p(x)} (u) + \alpha_0 |u|^{p(x)-2}u = d(x)\frac{|\nabla u|^{p(x)}}{|u|^{p(x)}+1} + f- div g(x) \quad \text{in } \Omega, \) \(u \in W_0^{1,p(x)}(\Omega), \) Where \(\Omega\) is an open set of \(\mathbb{R}^N\), possibly of infinite measure, we will also give some…

In this paper, we study the elliptic curve \(E_{a,b}(A_P)\), with \(A_P\) the localization of the ring \(A=F _p[e_1,...,e_n]\) where \(e_ie_i=e_i\) and \(e_ie_j=0\) if \(i\neq j\), in the maximal ideal \(P=(e_1,...,e_n)\). Finally we show that \( \text{Card}(E_{a,b}(A_P)) \geq (\text{Card}(E_{a,b}(F_p)) - 3)^n + \text{Card}(E_{a,b}(F_p)) \) and the execution time to solve the problem of discrete logarithm in \(E_{a,b}(A_P)\)…

The goal of this study was to use underwater robots instead of a diver’s observations to monitor and record the condition of an obstructed seabed in a shallow area. It is difficult to investigate marine resources that exist in deep water shaded by rock due to large and/or small rocks on the seabed. To solve…

Water quality assessment and prediction is a more and more important issue. Traditional ways either take lots of time or they can only do assessments. In this research, by applying machine learning algorithm to a long period time of water attributes’ data; we can generate a decision tree so that it can predict the future…

This article is devoted to the problem of blocking the propagation of sound in a gas stream. This can be useful in the problems of pipeline acoustics and the design of automotive silencers, when it is necessary to ensure the opacity of the boundary (cross section of the pipe) for sound simultaneously with the free…

The efficiency of a plasma-aided finishing process, namely capillary impregnation, can be predicted only by setting two basic parameters of the real wood porous surface and the actual impregnating solution – surface free energy and surface tension. In general, the following processing efficiency parameter was found and the rule is true: “The plasma aided or…

In remote measurements on large-sized objects main focus is on measuring deformations of bridge surfaces and determination of the dynamic amplification factor in particular. The proposed method estimates deflections of entire lower surface of a bridge due to placement of secondary radiators on this surface. Antenna array directivity pattern (ADP) is distorted during deflection of…

This paper deals with the problem of Fault Tolerant Control (FTC) using PID-type Fuzzy Logic Controller (FLC) for an Electronic Throttle Valve (ETV) described by a switched discrete-time system with input disturbances and actuator faults. In order to detect the faults, Unknown Input Observers (UIOs) are designed and formulated in terms of Lyapunov theory and…

The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM) is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM…

In modern powers systems, one of the most considerable topics is economic load dispatch (ELD). ELD is non-linear problem and it became non-convex and non-smooth problem with some constraints such as valve point loading effect. ELD is very crucial for energy generation and distribution in power systems. For solving ELD problem, a lot of methods…

Combinatorial optimization is an area of great importance since many of the real-world problems have discrete parameters which are part of the objective function to be optimized. Development of combinatorial optimization algorithms is guided by the empirical study of the candidate ideas and their performance over a wide range of settings or scenarios to infer…

In acronym Captology – Computers as Persuasive Technology, a persuasive component (lat. persuasibilibus – enticing) refers to the persuasive stimulation by intelligent technologies. Latter being transitive and interactive as intelligent systems, they have imposed, by their persuasivity, a ‘cult of information’, after which information has become a type of goods that as a utilitarian resource…

Over the years, wind loading codes has been a crucial tool in determining design wind loads on buildings. Due to the limitations of these codes especially in height, wind tunnel testing is recommended as the best approach in predicting wind flow around buildings but carrying out wind tunnel testing in the preliminary as well as…

Interconnection of the power system utilities and grids offers a formidable dispute in front of design engineers. With the interconnections, power system has emerged as a more intricate and nonlinear system. Recent years small signal stability problems have achieved much significance along with the conventional transient constancy problems. Transient stability of the power system can…

The problem of multi-criteria or multi-objective intercropping crop planning makes it vital to consider all related factors under the constraints that will produce the highest revenue and minimum cost. Principles of intercropping elements including soil type, plant area, plant diseases, planting and harvesting time and economics factors (e.g. price, cost) are some of the factors…

This paper is an extension of work originally presented in 2017 6th International Conference on Industrial Technology and Management (ICITM) [53]. This research focuses on the mobilization of human resources in the Asian electrical industry and analyzes the impact of engineers’ international mobility on the innovation of enterprises in the host countries. I examine the…

The era of big data has witnessed the explosion of tensor datasets, and large scale Probabilistic Tensor Factorization (PTF) analysis is important to accommodate such increasing trend of data. Sparsity, and Cold-Start are some of the inherent problems of recommender systems in the era of big data. This paper proposes a novel Sentiment-Based Probabilistic Tensor…