Search Results

The study objective was to design and evaluate the agroecological system of an agricultural model with vegetable covers (Luffa cylindrica, Cyclanthera pedata and Mucuna pruriens) associated with tomato plants (Lycopersicum esculentum Mill), Rio Grande and Cherry varieties. The agroecological system is shown with its components of inputs, processes and outputs. The main entrances being solar…

In this paper, a Hybrid System introduced (HS), which consists of Solar Photo-Voltaic (PV) system and the Fuel Cell (FC) System as alternative source of electrical power. The HS is used to supply the required electricity to a Single-Phase load with the help of Pulse Width Modulation Voltage Source Inverter (PWM-VSI). The PV provide the…

A framework is an amalgamation of integrated tools, libraries, utilities and its coordination to interact with the other automation components. The motive of designing a test automation framework is to implement uniform standards towards automation throughout the organization to achieve the desired outcomes. Test automation framework is required to maintain the standardization of the activities…

This paper describes a silicon carbide-field effect transistor (SiC-FET) gas sensor that is able to detect NO, O2, NH3, CO, and SO2. The gate of the sensor FET is a gas detection layer that consists of yttria-stabilized zirconia, nickel oxide, and platinum. The threshold voltages of the sensor depend on the target gas concentration, measurement…

Stability or balance is an integral component to perform daily activities without incurring injury or to be dependent on others. Sportsmen tend to have better balance than non-sports people but less is known about the single-leg balance ability. Furthermore, few studies analyzed the dynamic phase of single-leg stance that may contribute to better overall balance.…

This article presents the development of an automatism by means of a Programmable Logic Controller (PLC), for the Fire System of an Electric Substation; For this, the areas belonging to the electrical substation are initially described, where the automatism is developed, these being three; Patio area (Transformer location), Distribution board area and Control room. Then…

Through the Electrical Discharge Machining, the temperature is very high, which can lead to the material phase’s transformation and affects material properties, which can lead to failure of the products in the industry. This study aims to investigate the effect of a new input parameter (pulse cycle time Tc), with other parameters on the EDM…

Software is the primary and indispensable entity in our technologically driven world. Therefore, quality assurance, and in particular software testing, represents a vital component in the software development cycle. Throughout the years, many tools have been developed to collect metrics of software that had been implemented. These tools have some differences but continue to play…

The technological advance as well as needs of human beings made that systems became more and more complex. In contrast, the use and creation of new modelling languages became simple and no more reserved for a handful of language experts. Consequently, many new practices of systems implementation emerged, among them, the use of different domain…

Fatigue is broadly divided into two types depending on the content of a task: physical fatigue and mental fatigue. Mental fatigue is associated with human error. It is thus important to search for indicators that can easily evaluate mental fatigue. The aim of this study is to construct a system that can evaluate mental fatigue…

This paper presents the use of Electromagnetic simulation tools such as ADS and CST in order to practice designing the RF front-end transceiver for a continuous-wave radar. Teaching the microwave engineering course based on the conventional education methods results in students who may not be able to apply their theoretical knowledge to design the microwave…

Manufacturing System (MS) sizing is a crucial task to complete in order to obtain the desired MS performance and efficiency. It involves selecting the required number of resources from each used type in a given planning horizon. In fact, different approaches coupling simulation/optimization tools have been developed to solve this issue and evaluate the MS…

The aim of this article was the identification of cardiovascular diseases, after applying Katz and Higuchi fractal algorithms on 4 databases of ECG signals downloaded from the Physionet website: heart failure (HF), hypertension (H), ischemic heart disease (IHD) and normal sinus rhythm (NSR). For this purpose, initially the ECG signals passed through a filtering stage…

An optimization method using a semi-analytical approach is detailed in this paper to design a wideband multilayer meander-line polarizer. It consists of the transmission line equivalent circuit study to find the best values of the shunt components that allow the maximum transmission and a 90 phase difference between two orthogonal components over the entire bandwidth,…

Modern universities aim at carrying capacity human resources component in its tri dharma (Three Pillars of Higher Education). UPI with sufficient conditions in the management of several resources has undoubtedly tried to establish itself as a modern university. The superior human resource support in every competition and the university’s tri dharma is the primary resource…

The integrating model becomes one of key trends in engineering design. The more the product has functional specifications, the more the industrial consumer apply in many fields. In this paper, a fusion design of architecture platform for autonomous system is demonstrated. It is greater due to combining the specifications of various types in commercial market…

The entire electrical system is changing at an abrupt speed since its beginning. With the rapid advance of renewable energies (which are constantly subject to fluctuations), the electricity generation is distributed to countless locations. The traditional model of the unidirectional flow of electricity is leaning towards multidirectional flows. This situation needs significant changes in the…

Neurological signals are generally very weak in amplitude and strongly noisy. As a result, one of the major challenges in neuroscience is to be able to eliminate noise and thus exploit the maximum amount of information contained in neurological signals (EEG…). In this paper, we aimed at studying the N400 wave of the Event-Related Potentials…

The definition of equipment and components of physical plants is a necessary step towards the development of simulation, control, and supervisory applications for the petrochemical industry. Often it happens that the same plant/equipment is (re)modeled on each application, causing a waste-oftime on repetitive (re)design, besides introducing potential inconsistencies between the models. Moreover, even though each…

Many robots have been proposed for smart applications in recent years However, while these robots have good ability to move between fixed points separated by short distances, they perform less well when required to navigate complex interior spaces with an irregular layout and multiple obstacles due to their relatively crude positioning and path control capabilities.…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

This paper is an extension of work originally presented in 2018 Global Smart Industry Conference (GloSIC). Researches are devoted to the development of Smart technology for complex objects control and prediction on the basis of a distributed Honeywell DCS control system of the TengizChevroil enterprise using the example of a technological process of medium pressure…

The article of given research presents the mathematical and computer modeling of flame attenuation in narrow channels for different fire extinguishing and explosion suppression compositions. Such kind of flame distribution and attenuation could be considered for different media and channels but in this case it was considered for narrow channels. The effect on the combustion…

Software architecture and design is an important component in the software engineering field. This aspect of software engineering covers the functional and non-functional requirements of any system being proposed to be developed, while software architecture deals with non-functional requirements, software design entails the functional requirements. The objective of this paper is to critically analyze current…

The paper presents a novel concept of design of electric system for Off-shore Wind Power Plant (OWPP) based on frequency. In the literature, a new transmission system i.e. Fractional Frequency Transmission System (FFTS) has been proposed as an economic alternative to High Voltage AC (HVAC) and High Voltage DC (HVDC) for power transmission from Off-shore…