In this age of smart devices, many people are carrying a smartphone with them all the time. When they are at home, most of them are connected with the home Wi-Fi network. In this paper, a Wi-Fi network based architecture is proposed to control home appliances using a smartphone and also with a touchscreen-based wall…

This is a comparative study on the behavior of a dual medium height building with different walls solutions, in a high seismic area (Bucharest, Romania). The main feature of those buildings is the placement of load bearing walls on the perimeter of the building. This is done to limit the lateral displacement when the structure…

The paper shows the influence of nonbearing masonry walls for medium rise framed buildings placed at higher stories but not at the ground floor. The building studied here is a hotel that will be built in Bucharest, Romania. This is a high seismic area according to the seismic codes in force. The structure is composed…

The drive for this report is to inaugurate the innumerable techniques espoused by the refactoring tools in coding development. The software product is a very complex and time-consuming process of development. Difficulty understanding and maintaining poorly designed software systems Software maintenance can take up to 50% of total development costs for software production. As a…

This paper showed visualization of technics about cardiopulmonary resuscitation contributed to acquiring the skills and understanding them. Especially, this system is focused on the individuality in each object (men, women, and babies) There are problems of a general cardiopulmonary resuscitation (CPR) training because learners are generally taught by instruction based on a subjective judgment. Because…

This paper deals about an application of optimal power flows (OPF) constrained with synchronous generator capability curve for power market analysis (SGCC). OPF main features gather in its mathematical formulation non-convexity, non-linearity, and it shows to be a hard to solve optimization problem. In some operational scenarios, SGCC can limit power flows bringing the theoretical…

This was a study on the behavior of a confined masonry bearing wall in a medium height dual building. This wall had to be placed at one corner of the building. It had to be a masonry wall, not to be too stiff and drag the rigidity center too far from the building’s center. The…

This is a study on a confined masonry slender walls building in a high seismic area. The structure also contains frames, but the walls bear most of the gravity and seismic loads. The building will be used as a school. It will be built in Bucharest, Romania. It contains a ground floor and 2 stories…

This is a study on non-bearing masonry walls, in a high, reinforced concrete walls building. It will be built in Bucharest, Romania. This is a high seismic area. The building will be used as a dwelling. The structure is composed of a ground floor and 10 stories above. It is interesting to see the interaction…

Power consumption is becoming more and more important in the Internet of Things (IOT). The ADC is the main power hungry in multi-sensor electronic systems and effectively reducing ADC power consumption without affecting ADC characteristics is an important. This paper is extended from the conference paper. The segmented SAR ADC presents reconfigurable 9 to 12-bit…

Climate change, increasing fuel oil prices and new international regulation on ship emissions lead to more focus on shipping fuel consumption and energy efficiency. There are various solutions for improving the ship energy efficiency. In this manuscript, we aim to present a real case of energy saving by adopting the central cooling system with box…

There are high expectations for commercial cloud services as an economical computation resource when executing scientific computing workflows, for which the computation is increasing on a daily basis. However, no method has been developed for determining whether a scientific computing workflow can be executed at a low usage cost, and thus scientists have difficulty in…

Acute Myocardial Infarction (Heart Attack), a Coronary Heart Disease (CHD) is one of the major killers worldwide. Around one thousand data has been collected from AMI patients, people are at risk of maybe a heart attack and individuals with the significant features closely related to heart attack. The sophistication in mobile technology, health care applications…

This article discusses IoT security in situations whereby devices do not share the same security domains, which raises security, privacy and safety concerns. It then presents an Access Control and Privacy infrastructure for addressing these concerns in the context of distributed environments. IoT deployments allow billions of connected physical devices to collect, process and share…

Advances in technology have enabled the installation of an increasing number of sensors in various mechanical systems allowing for more detailed equipment health monitoring capabilities. It is hoped the sensor data will enable development of predictive tools to prevent system failures. This work describes continued analysis of sensor data surrounding a seizure of a turbocharger…

Metaheuristic hybridization has recently been widely studied and discussed in many research works as it allows benefiting from the strengths of metaheuristics by combining adequately the different algorithms. MMACS is a new hybrid ant colony optimization algorithm based on the foraging behavior of ants. This algorithm presents two hybridization levels. The first hybridization consists in…

Predicting the impact of suicide on incidental witnesses at an early stage helps to avert the possible side effect. When suicide is committed in public, incidental observers are left to grapple with it. In many cases, these incidental witnesses tend to experience the emotional side effect with time. In this study, we employed a Machine…

Mental health disorder is becoming a social problem, and there is a need for technology that can easily check for states of stress and depression as a countermeasure. Conventional methods of diagnostic support and screening include self-administered psychological tests and use of biomarkers. However, there are problems such as burden on subjects, examination costs, dedicated…

Plastic is highly polluting nowadays and is found in many disposable elements used for people. Plastic materials are disposed inadequately and large quantities of them become pollution in the ground, water, and air, affecting plants and animals. Most of the plastic is Polyethylene Terephthalate (PET) which is used in many activities. Resistance, support capacity, and…

In this paper a chemical substance reporting system is presented to enable industry to assess the impacts of increasing chemical regulations. Chemical regulations impose the need to monitor, control and restrict the use of hazardous substances. As chemical substances become more regulated, industry requires mechanisms to identify potential business continuity risks, posed by increased regulation.…

Usually, after properly biasing an analog circuit we need to linearize its transistors in order to linearize the entire circuit for performance analysis and design. This linearization is done through modeling of devices, which is becoming more and more complicated as the electronic technology advances. This is not of course a major issue for circuit…

In most industrial high-power applications, the brushless DC (BLDC) motor is connected to multi-level inverters specially the three-level NPC inverters (B12). Torque ripple is a critical issue in BLDC motor drives. Accordingly, minimizing the ripple produced in the torque is necessary to enhance the BLDC motor drive performances. This paper aims to develop two direct…

This paper is the extension of the work originally presented in 2nd International Conference on Man and Machine Interfacing (MAMI 2017) and the paper of Yue et al. The present study aims at observing the effect of various parameters on temperature distribution profiles at various environmental temperature, tissue thermal conductivities, metabolic rates, blood perfusion rates,…

Transport planners and engineers frequently face the challenge to determine the best design for a specific junction. Many road design manuals provide guidelines for the design and evaluation of different junction alternatives, however these mostly refer to specialized software in which the performances of design alternatives can be modelled. In the first stage of the…

A design of elliptical printed dipole antenna based on neural network approach is presented in this paper for recent WiMAX, Bluetooth, WLAN, LTE, and future 5G applications. The dipole patch is printed on top of substrate which has relative permittivity of 2.2 and 0.787mm of thickness. The elliptical dipole antenna is single band and the…