Search Results

In this article we’ll tackle the control of multi-motors electric drives with high dynamic, with rapid changes in torque and speed, with rigid or flexible coupling of motors, where the control strategy is FOC (Field Oriented Control) for each drives and the distributed control in local network using the CANopen protocol. In the surface mining…

This article presents the instantiation of the Model of Adaptation of Learning Objects (MALO) developed in previous works, using the competencies to be developed in a given educational context. MALO has been developed for virtual environments based on an extension of the LOM standard. The model specifies modularly and independently two categories of rules, of…

This paper describes a system to gather information from a stationary camera to identify moving objects. The proposed solution makes only use of motion vectors between adjacent frames, obtained from any algorithm. Starting from them, the system is able to retrieve clusters of moving objects in a scene acquired by an image sensor device. Since…

A wormhole attack is one of the most critical and challenging security threats for wireless sensor networks because of its nature and ability to perform concealed malicious activities. This paper proposes an innovative wormhole detection scheme to detect wormhole attacks using computational intelligence and an artificial neural network (ANN). Most wormhole detection schemes reported in…

In this paper, we propose a two steps-based algorithm to solve the modular link version of the Capacitated Network Design Problem (CNDP) which consists to determine the optimal network that guarantees the routing of a set of commodities. In our proposition, CNDP is divided into two sub-problems: Network Design problem (NDP) and Network Loading Problem…

In virtual environments, virtual hand interactions play a key role in interactivity and realism allowing to perform fine motions. Data glove is widely used in Virtual Reality (VR) and through simulating a human hands natural anatomy (Avatar’s hands) in its appearance and motion is possible to interact with the environment and virtual objects. Recently, hand…

Segmented and unsegmented 3D insulated copper through silicon vias (TSVs) of diameter 10 micro-meter, height 100 micro-meter and silicon of sizes 100 micro-meter by 100 micro-meter by 100 micro-meter are modeled using analysis system (ANSYS), equivalent circuit using advanced design system (ADS) at frequency ranges between 100MHz and 40GHz and 10MHz step size. The segmented…

In this study, a new method is devised and presented for the dynamic analysis of a 2xn RLC circuit network modeled with the fractional-order circuit elements. The analysis method is based on the principles of dynamic analysis with transfer function approximation. Firstly, the fractional-order 2xn RLC circuit network of interest which is divided into n…

An effective communication among the road users is crucial for safety precautions. Nowadays, a light emitting diode (LED) are commonly installed on a motor vehicle as the lighting system. The LED lights are more reliable and flexible in terms of the design and power adjustments. To further utilize the LED applications in a vehicular system,…

This paper describes the design of a pulse generator to excite PZT and PVDF ultrasonic transducer arrays, based on the Programmable System-on-Chip (PSoC) module. In this module, using programmable logic different pulses were implemented; these pulses are required in ultrasonic applications for multiple channels to excite PZT and PVDF transducer arrays. To excite multiple elements,…

The concept of cloud computing has arisen thanks to academic work in the fields of utility computing, distributed computing, virtualisation, and web services. By using cloud computing, which can be accessed from anywhere, newly-launched businesses can minimise their start-up costs. Among the most important notions when it comes to the construction of cloud computing is…

This paper studies the design of supervisory controllers with a minimum number of monitor places for Manufacturing System modeled as safe Petri Nets. The proposed approach considers a class of safety specifications known as Behavioral Constraints with a restricted syntax. The set of Behavioral Constraints are represented as predicate logic formulas in normal conjunctive form.…

In the recent years, the fast development and the exponential utilization of social networks have prompted an expansion of social Computing. In social networks users are interconnected by edges or links, where Facebook, twitter, LinkedIn are most popular social networks websites. Due to the growing popularity of these sites they serve as a target for…

This paper is an extension of work originally presented and published in IEEE International Multidisciplinary Conference on Engineering Technology (IMCET). This work presents a design and implementation of a moving human tracking system with obstacle avoidance. The system scans the environment by using Kinect, a 3D sensor, and tracks the center of mass of a…

This study investigates the synchronization issue of multiple robot manipulators in the presence of time delay. Since several previous works based on synchronization task neglect the communication delay, in this paper we develop a finite time stability based on a Lyaponov functional for synchronization of a networked robotic system where time delay exists during the…

The axial flux permanent magnet synchronous motor (AFPM motor) using magnet bearings instead of ball-bearings at both two shaft ends could allow rotational speed of shaft much greater than nominal speed. One of the solutions to increase motor speed higher than its nameplate speed is reducing rotor’s pole magnetic flux of rotor (Yp). This paper…

Vehicular ad-hoc networks (VANETs) are still more challenging to overcome even if they have been widely studied during the last decades. The routing mechanism is the essentially relevant issue in this field. Indeed, it must strictly to be adapted to specific and unique characteristics such as the high mobility of the vehicles, the dynamic nature…

The importance of Modelling Methods Engineering is equally rising with the importance of domain specific languages (DSL) and individual modelling approaches. In order to capture the relevant semantic primitives for a particular domain, it is necessary to involve both, (a) domain experts, who identify relevant concepts as well as (b) method engineers who compose a…

Analysis of Arabic language has become a necessity because of its big evolution; we propose in this paper a rule based extraction method of Arabic text to solve some weaknesses founded on previous research works. Our approach is divided on preprocessing phase, on which we proceed to the tokenization of the text, and formatting it…

In this paper, we investigate the performance of channel inversion schemes for interference cancellation with compensation network in multi-user MIMO broadcasting channel. To achieve good performance, mutual coupling between two-element compact arrays is characterized by the receiving mutual impedance method (RMIM) to formulate the compensation network-operating matrix. A prototype of two-element compensation network with an…

Pure Aluminium and its alloy are widely utilized in Engineering and Industrial applications due to certain significant properties such as softness, ductility, corrosion resistance, and high electrical conductivity which it possesses. Addition of an agro-waste based grain refiner to the melt can alter the characteristics positively or negatively. Therefore, the aim of this paper is…

The unsupervised morphology processing in the emerging mutant languages has the advantage over the human/supervised processing of being more agiler. The main drawback is, however, their accuracy. This article describes an unsupervised morphemes identification approach based on an intuitive and formal definition of event dependence. The input is no more than a plain text of…

The article deals with the problem of increasing the accuracy of determination of aircraft’s navigation flight parameters. Increasing the accuracy and sensitivity of navigation parameters determination will improve the efficiency of air conveyance by optimizing the flight trajectories and reducing the flight time and simultaneously will ensure the sufficient level of air conveyance safety. The…

Countries’ effective and efficient border security is becoming increasingly important in today’s global world of economy and trade. To ensure these, customs organisations are responsible for the prevention of illicit goods’ transportation across borders, particularly upon entry. The predicament of the customs administrations will soon be aggravated by both the increase of global trade and…

A thrombus or a blood clot is the result of blood coagulation which is a natural process to prevent bleeding. An inappropriate formation of a thrombus in a deep vein is known as Deep Venous Thrombosis (DVT). The main complication of a DVT is a Pulmonary Embolism (PE) which occurs when a thrombus breaks loose…