Results (2107)
Search Parameters:
Keyword: ATEMPC-based energy efficiency improvement in a pusher type billets reheating furnace
The research reported in this paper proposes an Advanced Process Control system, denoted “i.Process | Steel – RHF”, oriented to energy efficiency improvement in a pusher type billets reheating furnace located in an Italian steel plant. A tailored control method based on a two-layer Model Predictive Control strategy has been created that involves cooperating modules.…
Read MoreTPMTM: Topic Modeling over Papers’ Abstract
Probabilities topic models are active research area in text mining, machine learning, information retrieval, etc. Most of the current statistical topic modeling methods, such as Probabilistic Latent Semantic Analysis (pLSA) and Latent Dirichlet Allocation (LDA). They are used to build models from unstructured text and produce a term-based representation to describe a topic by choosing…
Read MoreEnhanced Outdoor to Indoor Propagation Models and Impact of Different Ray Tracing Approaches at Higher Frequencies
The main target of this article is to study the provision of indoor service (coverage) using outdoor base station at higher frequencies i.e. 10 GHz, 30 GHz and 60 GHz. In an outdoor to indoor propagation, an angular wall loss model is used in the General Building Penetration (GBP) model for estimating the additional loss…
Read MoreInterference Avoidance using Spatial Modulation based Location Aware Beamforming in Cognitive Radio IOT Systems
The Internet of Things (IOT) is a revolutionary communication technology which enables numerous heterogeneous objects to be inter-connected. In such a wireless system, interference management between the operating devices is an important challenge. Cognitive Radio (CR) seems to be a promising enabler transmission technology for the 5G-IOT system. The “sense-and-adapt” smart transmission strategy in CR…
Read MoreSoftware and Hardware Enhancement of Convolutional Neural Networks on GPGPUs
Convolutional Neural Networks (CNNs) have gained attention in recent years for their ability to perform complex machine learning tasks with high accuracy and resilient to noise of inputs. The time-consuming convolution operations of CNNs pose great challenges to both software as well as hardware designers. To achieve superior performance, a design involves careful concerns between…
Read MoreCommunity Detection in Social Network with Outlier Recognition
Exploring communities and outliers in Social Network is based on considering of some nodes have overlapped neighbor node within the same group as well as some nodes have no any link to the other node or have no any overlapped value. The existing approaches are based on the overlapping community detection method were only defined…
Read MoreCancer Mediating Genes Recognition using Multilayer Perceptron Model- An Application on Human Leukemia
In the present article, we develop multilayer perceptron model for identification of some possible genes mediating different leukemia. The procedure involves grouping of gene based correlation coefficient and finally select of some possible genes. The procedure has been successfully applied three human leukemia gene expression data sets. The superiority of the procedure has been demonstrated…
Read MoreThe Internet of Things ecosystem: the blockchain and data protection issues
The IoT is innovative and important phenomenon prone to several services and applications such as the blockchain which an emerging phenomenon. We can describe the blockchain as blockchain as a service because of the opportunity to use several applications based on this technology. We, indeed, should take into account the legal issues related to the…
Read MoreTwo-Stage Performance Engineering of Container-based Virtualization
Cloud computing has become a compelling paradigm built on compute and storage virtualization technologies. The current virtualization solution in the Cloud widely relies on hypervisor-based technologies. Given the recent booming of the container ecosystem, the container-based virtualization starts receiving more attention for being a promising alternative. Although the container technologies are generally considered to be…
Read MoreAdaptive and Non Adaptive LTE Fractional Frequency Reuse Mechanisms Mobility Performance
Mobile broadband has gained momentum with the growing demand of user data rates. Long Term Evolution (LTE) technology is the step in mobile communications evolution, developed to satisfy high data rate demand, and meet better spectral efficiency requirements. Effective radio resource management and inter cell interferences are the major challenges. Fractional Frequency Reuse (FFR) is…
Read MoreComputation of Viability Kernels on Grid Computers for Aircraft Control in Windshear
This paper is devoted to the analysis of aircraft dynamics in the cruise flight phase under windshear conditions. The study is conducted with reference to a point-mass aircraft model restricted to move in a vertical plane. We formulate the problem as a differential game against the wind disturbances: The first player, autopilot, manages, via additional…
Read MoreAn Analysis of K-means Algorithm Based Network Intrusion Detection System
In this modern age, information technology (IT) plays a role in a number of different fields. And therefore, the role of security is very important to control and assist the flow of activities over the network. Intrusion detection (ID) is a kind of security management system for computers and networks. There are many approaches and…
Read MoreHardware Acceleration on Cloud Services: The use of Restricted Boltzmann Machines on Handwritten Digits Recognition
Cloud computing allows users and enterprises to process their data in high performance servers, thus reducing the need for advanced hardware at the client side. Although local processing is viable in many cases, collecting data from multiple clients and processing them in a server gives the best possible performance in terms of processing rate. In…
Read MoreStructure-Preserving Modeling of Safety-Critical Combinational Circuits
In this work, a representative combinational circuit is visualized in various ways. It is abstracted (concretized) from transistor level to gate level and a structure-preserving transition is carried out into a signal flow graph. For creating a signal flow plan it is necessary to swap the nodes and the edges in the signal flow graph.…
Read MoreTracking and Detecting moving weak Targets
Detect and tracking of moving weak targets is a complicated dynamic state estimation problem whose difficulty is increased in case of high clutter conditions or low signal to noise ratio (SNR). In this case, the track-before-detect filter (TBDF) that uses unthresholded measurements considers as an effective method for detecting and tracking a single target under…
Read MorePerformance Analysis of Regenerative Braking in Permanent Magnet Synchronous Motor Drives
This paper describes the design and analysis of a regenerative braking system for a permanent magnet synchronous motor (PMSM) drive for electric vehicle (EV) applications. First studied is the principle for electric braking control of a PMSM motor under field-oriented control (FOC). Next, the maximum braking torque in the regeneration mode as well as the…
Read MoreInnovative Research on the Development of Game-based Tourism Information Services Using Component-based Software Engineering
In recent years, a number of studies have been conducted exploring the potential of digital tour guides, that is, multimedia components (e.g., 2D graphic, 3D models, and sound effects) that can be integrated into digital storytelling with location-based services. This study uses component-based software engineering to develop the content of game-based tourism information services. The…
Read MoreActuator Fault Reconstruction based Adaptive Polytopic Observer for a Class of Continuous-Time LPV Systems
This paper is an extension of work originally presented in conference name. The goal is to propose new fault detection and fault isolation techniques for a polytypic linear parameter-varying system (LPV). In this work, an adaptive observer design is formulated for a given polyquadratic Lyapunov function. Subsequently, new sufficient conditions are given in terms of…
Read MoreCo-designed accelerator for homomorphic encryption applications
Fully Homomorphic Encryption (FHE) is considered as a key cryptographic tool in building a secure cloud computing environment since it allows computing arbitrary functions directly on encrypted data. However, existing FHE implementations remain impractical due to very high time and resource costs. These costs are essentially due to the computationally intensive modular polynomial multiplication. In…
Read MoreSystematic Tool Support of Engineering Education Performance Management
Engineering schools must adopt or develop their own systems and processes for graduate attribute assessment. In this paper, we take a systems engineering approach to graduate attribute assessment and propose a system architecture and tool-supported continuous improvement process with key algorithms and mathematical analysis to process the data and provide performance management reporting. Over several…
Read MoreThe method of correlation investigation of acoustic signals with priority placement of microphones
Examples of analytical calculations of the system characteristics of the hardware and time complexity of the correlation system based on a certain number of microphones and the corresponding number of interrelations are presented. The structural solutions of the hardware special processor implementation of such class of multichannel devices for recognition and identification of types and…
Read MoreDecentralized Control Approaches of Large-Scale Interconnected Systems
In this paper, we investigate the decentralized control problem for largescale interconnected systems. The synthesis of the decentralized controller consists in determining gains which ensure the stability of the global system. To calculate these gains, three approaches are presented. Our main contribution is to develop a new decentralized stabilization approach which the decentralized local gains…
Read MoreNon-rigid Registration for 3D Active Shape Liver Modeling
To avoid biopsies, doctors use non invasive medical techniques such as the computed tomography. Even that, the detection of the liver remains a big challenge because of the gray level and shape variations which depend on patients and acquisition modalites. In this work, we propose to create a 3D liver model in the training phase…
Read MoreTheoretical Investigation of Combined Use of PSO, Tabu Search and Lagrangian Relaxation methods to solve the Unit Commitment Problem
Solving the Unit Commitment problem (UCP) optimizes the combination of production units operations and determines the appropriate operational scheduling of each production units to satisfy the expected consumption which varies from one day to one month. Besides, each production unit is conducted to constraints that render this problem complex, combinatorial and nonlinear. In this paper,…
Read MoreInnovative design with learning reflexiveness for developing the Hamiltonian circuit learning games
In this study, we use a new proposed framework to develop the Hamiltonian circuit learning games for college students. The framework is for enhancing learners’ activities with learning reflexiveness. The design of these games is based on this framework to achieve the targeted learning outcomes. In recent years, the game-based learning is a very popular…
Read More
