A 500 KVA Uninterruptible power supply (UPS) using Fuel Cells (FC) and super-capacitors (SCs) was studied with the worst case of 10 minutes and eight hours of interruption per day. A power management system was established to control the FC and the SCs in order to extract the hybridization benefits with a comparison between a…

This application developing for the project OCEMA comes as result of architecture building in Android, then the development of a professional modeling in Talend Open Studio for Big Data, which enabled the integration of data from many data sources. One of its uses is the quick identification of people found in areas affected by natural…

In this paper we focus on the adaptive modulation and coding (AMC) techniques, makes use of the channel state information (CSI) to improve the spectral efficiency (SE) in wireless communication systems. To achieve higher data rates and lower bit error rate (BER’s) channel coding can be carried out in OFDM, called COFDM. The NLMS channel…

Patient generated data, or personal clinical data, is considered an important aspect in improving patient outcomes. However, personal clinical data is difficult to collect and manage due to its distributed nature. For example, they can be located in multiple places such as doctors’ offices, radiology centers, hospitals, or some clinics. Another factor that can make…

This article examines the hydrogen storage phenomenon in a spherical cavity. The hydrogen gas or liquid is subjected to high pressures, leading to significant loss of mass of hydrogen, and requires materials that can withstand these high pressures also minimize losses. For all these reasons, the problem is considered at the quantum scale. So in…

In this paper an efficient feedback quantization technic for beamforming in MIMO systems is presented. The proposed technic named time domain quantization TD-Q is based on the feedback of time domain parameters necessary for the reproduction of the beamforming matrix at the transmitter. This TD-Q presents the same performance than the conventional Givens rotation quantization…

Safety-critical systems are well documented and standardized (e.g. IEC 61508, RTCA DO-178B) within system design cycles. However in Defence and Security, systems that are critical to the success of a Mission are not defined within the literature nor are there any guidelines in defining criticality in their design or operational capabilities. When it comes to…

Nowadays, text annotation plays an important role within real-time social media mining. Social media analysis provides actionable information to its users in times of natural disasters. This paper presents an approach to a real-time two layer text annotation system for social media stream to the domain of natural disasters. The proposed system annotates raw tweets…

The necessity of navigation in people and mobile robots (MR) through specific environments (indoors or outdoors) has become more and more relevant nowadays. For indoors, generally speaking, the positioning systems can be divided into 2D (two dimensions) or 3D (three dimensions) approaches, where Ultrasonic Local Positioning Systems (ULPS) are often a common solution for MRs…

Recently, the number of industrial accidents of chemical plants has been increasing in Japan. The fault detection system is required to keep chemical plant safely. In this study, a fault detection system for a chemical plant using agent framework and negative selection algorithm was proposed. The negative selection algorithm is one of artificial immune systems.…

On-ramping is being widely used as e method to increase the freeway operational efficiency. The main traffic parameter that must be taken in consideration for the implementation of the feedback control strategies for the on-ramp metering is density on the main section of road. In this paper is given discretized model of traffic which is…

The research reported in this paper proposes an Advanced Process Control system, denoted “i.Process | Steel – RHF”, oriented to energy efficiency improvement in a pusher type billets reheating furnace located in an Italian steel plant. A tailored control method based on a two-layer Model Predictive Control strategy has been created that involves cooperating modules.…

Probabilities topic models are active research area in text mining, machine learning, information retrieval, etc. Most of the current statistical topic modeling methods, such as Probabilistic Latent Semantic Analysis (pLSA) and Latent Dirichlet Allocation (LDA). They are used to build models from unstructured text and produce a term-based representation to describe a topic by choosing…

The main target of this article is to study the provision of indoor service (coverage) using outdoor base station at higher frequencies i.e. 10 GHz, 30 GHz and 60 GHz. In an outdoor to indoor propagation, an angular wall loss model is used in the General Building Penetration (GBP) model for estimating the additional loss…

Brain tumor is such an abnormality of brain tissue that causes brain hemorrhage. Therefore, apposite detections of brain tumor, its size, and position are the foremost condition for the remedy. To obtain better performance in brain tumor and its stages detection as well as its position in MRI images, this research work proposes an advanced…

Exploring communities and outliers in Social Network is based on considering of some nodes have overlapped neighbor node within the same group as well as some nodes have no any link to the other node or have no any overlapped value. The existing approaches are based on the overlapping community detection method were only defined…

In the present article, we develop multilayer perceptron model for identification of some possible genes mediating different leukemia. The procedure involves grouping of gene based correlation coefficient and finally select of some possible genes. The procedure has been successfully applied three human leukemia gene expression data sets. The superiority of the procedure has been demonstrated…

The IoT is innovative and important phenomenon prone to several services and applications such as the blockchain which an emerging phenomenon. We can describe the blockchain as blockchain as a service because of the opportunity to use several applications based on this technology. We, indeed, should take into account the legal issues related to the…

Cloud computing has become a compelling paradigm built on compute and storage virtualization technologies. The current virtualization solution in the Cloud widely relies on hypervisor-based technologies. Given the recent booming of the container ecosystem, the container-based virtualization starts receiving more attention for being a promising alternative. Although the container technologies are generally considered to be…

Mobile broadband has gained momentum with the growing demand of user data rates. Long Term Evolution (LTE) technology is the step in mobile communications evolution, developed to satisfy high data rate demand, and meet better spectral efficiency requirements. Effective radio resource management and inter cell interferences are the major challenges. Fractional Frequency Reuse (FFR) is…

In this modern age, information technology (IT) plays a role in a number of different fields. And therefore, the role of security is very important to control and assist the flow of activities over the network. Intrusion detection (ID) is a kind of security management system for computers and networks. There are many approaches and…

In this work, a representative combinational circuit is visualized in various ways. It is abstracted (concretized) from transistor level to gate level and a structure-preserving transition is carried out into a signal flow graph. For creating a signal flow plan it is necessary to swap the nodes and the edges in the signal flow graph.…

This paper describes the design and analysis of a regenerative braking system for a permanent magnet synchronous motor (PMSM) drive for electric vehicle (EV) applications. First studied is the principle for electric braking control of a PMSM motor under field-oriented control (FOC). Next, the maximum braking torque in the regeneration mode as well as the…

This paper is an extension of work originally presented in conference name. The goal is to propose new fault detection and fault isolation techniques for a polytypic linear parameter-varying system (LPV). In this work, an adaptive observer design is formulated for a given polyquadratic Lyapunov function. Subsequently, new sufficient conditions are given in terms of…

Fully Homomorphic Encryption (FHE) is considered as a key cryptographic tool in building a secure cloud computing environment since it allows computing arbitrary functions directly on encrypted data. However, existing FHE implementations remain impractical due to very high time and resource costs. These costs are essentially due to the computationally intensive modular polynomial multiplication. In…