Results (11)
Search Parameters:
Keyword: Electrodes
IoT System and Deep Learning Model to Predict Cardiovascular Disease Based on ECG Signal
In this work, our contribution will intervene to reduce the impact of noises on the ECG signals. Various ECG denoising approaches were tested to see how efficient they were in removing dominant noises that add to pure ECG signals. Due to different causes such as interference, muscular noise, body movement related to breathing, and so…
Read More Low-Power Primary Cell with Water-Based Electrolyte for Powering of Wireless Sensors
In this work we discuss a special technique for powering of sensor systems, based on a low-power primary cell consisting of two electrodes, made from different metals, with water (lake, rain or tap water) used as an electrolyte. Once placed into an aqueous solution, the primary cell generates a small electric current, which may be…
Read More Architecture of Real-Time Patient Health Monitoring Based on 5G Technologies
Worldwide, the epidemiological situation is constantly changing and with the exponential increase in the number of confirmed coronavirus cases, the number of health care workers has decreased significantly and this is due to the direct and daily contact of patients. One of the major challenges of the last few months is to prevent the spread…
Read More An Investigation of the Effect of Optimal Plane Spacing Between Electrode Planes for the EIT Industrial Applications
In this paper, the effect of plane spacing between electrode planes on Electrical Impedance Tomography (EIT) reconstructed images is investigated. Image properties of models for various plane spacings between electrode planes on EIT imaging were investigated by applying conventional measurement strategies. Sensitivity analysis and spatial resolution analysis were used to study the influence of the…
Read More A Cavity Structure based Flexible Piezoelectric for Low-Frequency Vibration Energy Harvesting
Piezoelectric energy harvesters (PEH) can be used in many areas of application, including human walking, railways, pavements and bridges. Piezoelectric energy harvesters are currently based on two types of external forces, namely pressure load and mechanical oscillation or vibration. A vibration energy harvesting (VEH) is a mechanical oscillation in a piezoelectric energy harvester that harvested…
Read More Material, Structural Optimization and Analysis of Visible-Range Back-Illuminated OPFET photodetector
High gain-bandwidth product and visible/UV contrast photodetectors are vital in Visible Light Communication (VLC) and Ultraviolet (UV) reflectance imaging applications respectively. We adopt material and structural optimization to perceive such photodetectors with back-illuminated Optical Field Effect Transistor (OPFET) wherein any potential difference in absorption coefficient of the semiconductor material between the visible and the UV…
Read More Investigating The Detection of Intention Signal During Different Exercise Protocols in Robot-Assisted Hand Movement of Stroke Patients and Healthy Subjects Using EEG-BCI System
Improving the hand motor skills in post-stroke patients through rehabilitation based on movement intention derived signals from the brain in conjunction with robot-assistive technologies are explored. The experimental work is conducted using Electroencephalogram based Brain-Computer Interface (EEG-BCI) system and the AMADEO hand rehabilitation robotic device. Two protocols using visual-cues and then using a 2-Dimensional (2D)…
Read More Modelling of the resistance heating of the moving molybdenum sheet
This article describes the modeling procedure of a direct resistive heat model of the molybdenum sheet and its simulation with electrodes made from various materials. The main characteristic of the proposed model is its dynamic behavior, because model considers the movement of the molybdenum sheet. The simulation results are mutually compared and the optimal material…
Read More Multiclass Myoelectric Identification of Five Fingers Motion using Artificial Neural Network and Support Vector Machine
The research in Neuro-Prosthetics is gaining more significance and popularity as the advancement in prosthetics control allows amputees to perform even more tasks. Indeed, the improvement of classification accuracy is a challenge in prosthetics control. In this research, a system is developed in order to improve the multiclass classification rate. Two classifiers namely Artificial Neural…
Read More Preparation of Ni-C Ultrafine Composite from Waste Material
This work depicts the preparation of Ni-C ultrafine composite from used engine oil. The used oil was emulsified with detergent loaded with Ni (OH)2. The loaded emulsion was sprayed on electric plasma generated between two C electrodes to a DC main 28 V and 70-80 A. The purged Ni-doped carbon fume was trapped on a…
Read More A Reconfigurable Metal-Plasma Yagi-Uda Antenna for Microwave Applications
This paper is an extension of the work originally presented at the European Microwave Conference (EuMC) about a reconfigurable hybrid metal-plasma Yagi-Uda antenna operating at 1.55 GHz: this antenna consists of metallic reflector and active element and two plasma directors. The conference work showed through full-wave numerical simulations (CST Microwave Studio) how it is possible…
Read More