Search Results

Recently Network safety has become an important or hot topic in the security society (i.e. Encryption and Decryption) developed as a solution of problem that have an important role in the security of information systems (IS). So protected/secure the shared data and information by many methods that require in all internet faciality, data health and…

The Internet of Things (IoT) application has been experiencing increasingly progressive demand, especially for embedded devices (ED). However, the ED has limited capabilities, low power consumption resources, and low bandwidth in connecting to the Internet by using Wireless Sensor Networks (WSNs). Therefore, the WSNs form creates a necessity for new technologies and protocols for the…

This paper presents an adaptive step-size and variable leaky least mean square algorithm based on nonlinear adaptive filter with the adaptive lookup table using spline interpolation. An adaptive step-size approach is proposed with the energy of squared previous and present errors to boost up the convergence rate. A modified variable leaky mechanism is proposed with…

Stop and Wait (SW) ARQ, Go Back N (GBN) ARQ, and Selective Repeat (SR) ARQ are the main ARQ (Automatic-Repeat-reQuest) protocols used to ensure reliable delivery of digital data at correct sequence. These protocols are implemented at the DLC (Data Link Control) sub layer of Data Link Layer (DLL) of OSI (Open System Interconnection) network…

The water heating with parabolic trough solar collectors (PTC) is a very widespread and at the same time quite promising solar technology. However, PTC presents several problems in terms of the profitability of water heating. For this reason, our study of water heating with PTC collectors consists of two main parts. In the first part,…

The performance ratio (PR) based on IEC 61724 standard is calculated under the influence of seasonal variations and the capability of the system. On the other hand, The National Renewable Energy Laboratory (NREL) of the U.S. Department of Energy proposed the weather-corrected performance ratio (PRcorr). This PRcorr index calculates the performance of the PV system…

Automatic Repeat reQuest (ARQ) protocols are used to control transmission errors in data communications. They are used at Data Link Control (DLC) sublayer of Data Link Layer (DLL) of OSI (Open Systems Interconnection) network model to achieve flow and error control and provide smooth and reliable transmission between network nodes. ARQ protocols use acknowledgments and…

Analytical researches on a potential performance of multipath multiple-input multiple-output (MIMO) systems inspire the development of new technologies that decompose a MIMO channel into independent sub-channels on the condition of constrained transmit power. Moreover, in current studies of inter-symbol interference (ISI) MIMO systems, there is an assumption that channel state information (CSI) at receivers and/or…

This study presents the design and construction of the Dual Axis Solar Tracking System to ensure maximum energy gain. The solar tracking system will automatically follow the sun’s position to maximize the intensity of the light emitted from the sun. When the light intensity decreases, the system automatically changes its direction to get the maximum…

Recently, opportunistic networks are considered as one of the most attractive developments of ad hoc mobile networks (MANETs) that have emerged thanks to the development of intelligent devices. Due to the mobility-related instability of the paths between nodes and due to the limited buffer and energy resources, the ultimate objective of routing protocols in opportunistic…

This paper analyzes the process of reactive power compensation using thyristors switched capacitors TSC topology based on multiterminal switch during the starting of induction motor. The paper explains the control principle of this TSC topology which depends on the multiterminal switch. To actively track the required reactive power for the dynamic load and to perfectly…

In this paper we focus on the adaptive modulation and coding (AMC) techniques, makes use of the channel state information (CSI) to improve the spectral efficiency (SE) in wireless communication systems. To achieve higher data rates and lower bit error rate (BER’s) channel coding can be carried out in OFDM, called COFDM. The NLMS channel…

This paper describes the design and analysis of a regenerative braking system for a permanent magnet synchronous motor (PMSM) drive for electric vehicle (EV) applications. First studied is the principle for electric braking control of a PMSM motor under field-oriented control (FOC). Next, the maximum braking torque in the regeneration mode as well as the…

Radar ambiguity function is widely employed to analyze a radar system’s time delay (range) resolution, Doppler frequency (range rate) resolution, mainlobe width and sidelobes in both range and Doppler. In this paper, ambiguity functions of frequency diverse array (FDA) which offers range-angle dependent transmit beampattern and Phased array which yields angle transmit beampattern is investigated.…

Presently, individuals generate tremendous volumes of information on the internet. As a result, sentiment analysis is a critical tool for automating a deep understanding of user-generated information. Of late, deep learning algorithms have shown endless promises for a variety of sentiment analysis. The purpose of sentiment analysis is to categorize different descriptions as good, bad,…

This paper presents the modelling and analysis of permanent magnet synchronous generator (PMSG) which are used in direct driven small scale wind turbines. The 3 kW PM generator which is driven directly without gear system is analyzed by Ansoft Maxwell 2D RMxprt. The performance analysis of generator includes the cogging torque in two teeth, induced…

Dynamic Searchable Symmetric Encryption (DSSE) methods address the problem of securely outsourcing updating private data into a semi-trusted cloud server. Furthermore, Forward Privacy (FP) notion was introduced to limit data leakage and thwart the related attacks on DSSE approaches. FP schemes ensure previous search queries cannot be linked to future updates and newly added files.…

Usually, after properly biasing an analog circuit we need to linearize its transistors in order to linearize the entire circuit for performance analysis and design. This linearization is done through modeling of devices, which is becoming more and more complicated as the electronic technology advances. This is not of course a major issue for circuit…

Though AES is the highest secure symmetric cipher at present, many attacks are now effective against AES too which is seen from the review of recent attacks of AES. This paper describes an extended AES algorithm with key sizes of 256, 384 and 512 bits with round numbers of 10, 12 and 14 respectively. Data…

In this paper, a hybrid system solar cell antenna was studied. Our contribution lies in the combination of both optical and radio-frequency signals in a solar cell antenna. Hence, we propose a new method to merge antenna and solar cell. The leaf- shaped patch solar cell antenna was dedicated at a time to the energy…

In this paper, Constant False Alarm Rate (CFAR) detection of spatially distributed targets embedded in compound Gaussian clutter with Inverse Gamma texture is addressed. By taking into account the fact that clutter parameters are unknown in practical situations, we propose mean level based on Lookup Tables detectors, that operate as a two-step approach, which consists…

In this paper, we are concerned to investigate the efficiency of the second-order Redlich-Kister Finite Difference (RKFD) discretization scheme together with the Four Point Explicit Group Kaudd Successive Over Relaxation (4EGKSOR) iterative method for solving two-point boundary value problems (TPBVPs). In order to apply this block iteration to solve any linear system, firstly we discretize…

Visualization plays a crucial role in the exploratory analysis of Big Data. The direct visualization of Big Data is a challenging task and difficult to analyze. Dimensionality Reduction techniques extract the features in the context of visualization. Due to the unsupervised and non-parametric nature, most of the dimensionality reduction techniques are not evaluated quantitatively and…

The aim of this article is to analyze and evaluate the performance of Coordinated Multipoint (CoMP) transmission approach at a frequency of 28 GHz using three dimensional ray tracing simulations in an urban macrocellular environment. The new performance metric introduced in this article is the relative power usage. Other performance metrics examined in this article…