Search Results

Large power transformers generally include a customer request for a technically appropriate regulation unit. The selection process of the regulation unit consists of defining the required input data, performing mathematical calculations necessary to find the technical limit values that the regulation unit has to satisfy, and finally optimizing and selecting the appropriate regulation unit. The…

The decision support systems regarding the Supply Chains (SCs) management services can be significantly improved if an effective viable method is utilised. This paper presents a robust simulation optimisation approach (SOA) for the design and analysis of a granularity controlled and complex system known as Consumer Supply Network (CSN) incorporating uncertain demand and capacity. Minimising…

Almost every cells in human’s body contain the same number of genes so what makes them different is which genes are expressed at any time. Measuring gene expression can be done by measuring the amount of mRNA molecules. However, it is a very expensive and time consuming task. Using computational methods can help biologists to…

There are high expectations for commercial cloud services as an economical computation resource when executing scientific computing workflows, for which the computation is increasing on a daily basis. However, no method has been developed for determining whether a scientific computing workflow can be executed at a low usage cost, and thus scientists have difficulty in…

Metaheuristic hybridization has recently been widely studied and discussed in many research works as it allows benefiting from the strengths of metaheuristics by combining adequately the different algorithms. MMACS is a new hybrid ant colony optimization algorithm based on the foraging behavior of ants. This algorithm presents two hybridization levels. The first hybridization consists in…

Usually, after properly biasing an analog circuit we need to linearize its transistors in order to linearize the entire circuit for performance analysis and design. This linearization is done through modeling of devices, which is becoming more and more complicated as the electronic technology advances. This is not of course a major issue for circuit…

A sequential pre-treatment of demineralization and torrefaction, was carried out on palm empty fruit bunches (EFB). EFB and demineralized EFB (DEFB) were torrefied in a vertical tubular reactor in the temperature range of 200 to 280 °C for 30 mins under nitrogen (flow rate:100 mL/min. The pretreated samples were characterized using proximate and ultimate analyses,…

In this study, torrefaction pretreatment on palm kernel shell (PKS) was investigated using fixed bed reactor. The PKS was torrefied at the temperatures of 210, 230, 250, 270 and 290 °C. The characteristics between untreated and torrefied PKS were compared. The results showed that, the mass and energy yield lessened, while the calorific value augmented…

This work presents new pipeline-parallel, generic and configurable parallel hardware architectures for the Direct/Inverse Wavelet Packet Transform (DWPT/IDWPT) independent of any specific family of wavelets, implemented in FPGA technology using a parallel architecture of direct FIR filter. We propose in the following paper, new P-parallel structures for the DWPT and IDWPT transforms based on the…

In this work, we investigate the effects of variation of processing parameters on the quality of dispersion of polycarbonate compound. In order to achieve appropriate pigments dispersion, we performed compounding process parameters optimizations, by investigating three processing parameters, temperature, screw speed, and feed rate. We utilized experimental design for the optimization of process parameters based…

As the contribution from renewable energy sources increase, the power quality degradation has become a challenge for the power system operator. There are major two factors causing power quality deterioration. First is the current harmonic generation by the power electronic converters used in renewable energy sources, and second is the magnification of harmonic voltage due…

The Industrial Internet of Things (IIoT), a typical use case of the Internet of Things, has been a great prospect for development in the near future. In the developing fifth generation mobile communications, the IIoT is an extremely important application case. In this paper, the channel propagation properties are researched and modeled based on the…

In this research human gait database is collected using different possible methods such as Wearable sensors, Smartphone and Cameras. For a gait recognition accelerometer data from wearable shimmer modules and smartphone are used. Data from different sensors location is compared to know which sensor location have better recognition rate. Different walking scenarios like slow, normal…

A Digital Terrain Model (DTM) is a digital model representing the earth ‘s surface topography in three dimensions (3D) while a Digital Surface Model (DSM) represents the whole terrain including the objects on it such as trees and buildings. DTMs can be created through stereo-plotting. The advantage of this method is that the 3D data…

Selection of a routing protocol is vital for modern arena of Internet communication as network traffic and network complexities are rapidly increasing. This paper evaluates the effectiveness of three routing protocols namely routing information protocol version 2 (RIPv2), open shortest path first (OSPF), enhanced interior gateway routing protocol (EIGRP), and hybrid protocols based on these…

The object of this paper is to identify the unknown electrical parameters of solar photovoltaic generators in real time, through the application of a novel suggested hybrid method. The identification process is discussed with details, about the four steps of identification. In this issue, the first step describes the experimental data acquisition work done to…

Moderate exercise has been implemented in spaceflight programs to prevent muscle and joint damage under extreme circumstances such as microgravity. Although the physical effects of exercise have been investigated experimentally, advanced modeling and simulation techniques are powerful tools that could provide insight into the physical limitations, optimal conditions, and mechanisms that might lead to muscle…

A selective harmonic elimination system using fuzzy logic for the elimination of high magnitude harmonics with frequencies close to fundamental in the output voltage of single phase inverters is presented. The system does not require look up tables for storage of the data as in traditional harmonic elimination methods. The input of the fuzzy system…

The principal goal of this paper is the development of the experimental software solution for the extraction of dimensional unit from the uncalibrated image. Existing techniques are analyzed and also partially utilized in presented approach as an aid in the extraction process. The design of two different approaches was proposed, these were later implemented and…

Face recognition is one of the most well-known biometric methods. It is a technique used for identifying individual from his face. The recognition process takes the face and compares it with the one stored in the database for recognizing it. Many methods were proposed to achieve that. In this paper, a new technique is proposed…

During microwave heating of materials, the efficiency of microwave heating depends on the materials’ dielectric property, shapes and sizes of the material, materials’ position inside the applicator, operating frequency, level of input power, specific heat capacity, number and position of waveguide over the applicator, size and geometry of applicator etc. This paper examines the effects…

Diabetes is a condition of the body in which blood sugar level is higher than the normal average value. It is considered as a major cause of morbidity worldwide. According to the data reported in 2015,420 million people had diabetes worldwide, type 2 diabetes account for 85% of these cases. This shows 9.2% of the…

Analysis of magnetic resonant wireless power transfer systems aims to achieve maximum efficiency of the power transfer. From the analysis we wish to derive the maximum power and the frequency at which this occurs. This paper presents a method to estimate these two required values and to achieve this requires the solution of the input…

Today, computing devices of various types with wireless interconnections are used for diverse tasks and increasingly in ad hoc manners. It is not always obvious which devices are present, reachable, and connected when users and their devices are mobile. In such mobile computing environment, the number of registered lines on the network via network operators…

On-ramping is being widely used as e method to increase the freeway operational efficiency. The main traffic parameter that must be taken in consideration for the implementation of the feedback control strategies for the on-ramp metering is density on the main section of road. In this paper is given discretized model of traffic which is…