Search Results

Stability or balance is an integral component to perform daily activities without incurring injury or to be dependent on others. Sportsmen tend to have better balance than non-sports people but less is known about the single-leg balance ability. Furthermore, few studies analyzed the dynamic phase of single-leg stance that may contribute to better overall balance.…

With increasing photovoltaic (PV) penetration on distribution feeders, voltage functions is always a challenge. To control these variations due to the intermittent nature of PV generation,many utility companies use the traditional voltage regulating devices such as ON/OFF load tap changers, voltage regulators, switched capacitor banks and reactors. The use of smart inverters (SI) has been…

The Citrix NetScaler CPX, is one of the many Application Delivery Controllers (ADCs), which is used mainly for load balancing between the application servers in a datacenter network. ADCs are typically placed in the demilitarized zone in an organization’s network, handling the connectivity of the external clients to the organization’s servers. While performing load balancing…

Photovoltaic systems and monitoring go hand in hand. There is no better way to check the health of your photovoltaic system than to utilize a remote monitoring system. Monitoring and tracking of photovoltaic systems are crucial for reliable functioning and optimal yield of any solar electric system. This paper aims to introduce a remote electronic…

In an enterprise Wifi network, indoor and dense, co-channel interference is a major issue. Wifi controllers help tackle this problem thanks to radio resource management (RRM). RRM is a fundamental building block of any controller functional architecture. One aim of RRM is to process the radio plan such as to maximize the overall network transmit…

In the past decades, various ideas have proposed for reconductoring of overhead lines to enhance power transmission capacity considering growing energy demand. Conventional method of reconductoring is use to take couple of weeks but availability of shutdown for a prolong period is a major constraint in line uprating. Emergency restoration structure (ERS) is effective to…

In this work of technological development and research is presented the work done in the ITSAO to contribute to the use of clean energy such as photovoltaics and the implementation of activities to reduce electricity consumption by the technological community, the monitoring of electricity consumption is made on a monthly basis and an annual report…

This paper is an extension of research work originally presented in 2018 IEEE fifth International Congress on Information Science and Technology (CiSt). The research consists on developing method to diagnose electrical defects affecting wind turbine doubly-fed induction generator DFIG which constitutes a crucial part of wind energy conversion chain. First off all, we create a…

The integrating model becomes one of key trends in engineering design. The more the product has functional specifications, the more the industrial consumer apply in many fields. In this paper, a fusion design of architecture platform for autonomous system is demonstrated. It is greater due to combining the specifications of various types in commercial market…

The entire electrical system is changing at an abrupt speed since its beginning. With the rapid advance of renewable energies (which are constantly subject to fluctuations), the electricity generation is distributed to countless locations. The traditional model of the unidirectional flow of electricity is leaning towards multidirectional flows. This situation needs significant changes in the…

FM broadcast stations generate reverse intermodulation signals that cause communication problems between ATC controllers and pilots in the Air Traffic Control systems (ATC) in Thailand. In this paper proposes a balanced RF power amplifier using the improvement 3-dB quadrature hybrid couplers to reduce the reverse intermodulation of FM broadcasting systems. The mathematics analysis of the…

Recently, augmented reality (AR) technology has been applied to the inter- action technology between human and virtual objects. In AR interaction technology, it is necessary for users to be able to manipulate virtual objects intuitively. Thus, we focus on manipulating virtual objects directly with the user’s bare hands in this study. On the other hand,…

This study involved three departments of teachers and students. The concept of the flow-motivated exercise implemented with a set of flow nozzles. A computer-controlled airflow with specific music introduced, and the motion responses from the participants were analyzed during the initial test and field study. During the initial examination, we adjusted the magnitude and distance…

The definition of equipment and components of physical plants is a necessary step towards the development of simulation, control, and supervisory applications for the petrochemical industry. Often it happens that the same plant/equipment is (re)modeled on each application, causing a waste-oftime on repetitive (re)design, besides introducing potential inconsistencies between the models. Moreover, even though each…

The major problem in electric utility is Electrical Theft, which is harmful to electric power suppliers and causes economic loss. Detecting and controlling electrical theft is a challenging task that involves several aspects like economic, social, regional, managerial, political, infrastructural, literacy rate, etc. Numerous methods were proposed formerly for detecting electricity theft. However, the previous…

This paper analyzes the process of reactive power compensation using thyristors switched capacitors TSC topology based on multiterminal switch during the starting of induction motor. The paper explains the control principle of this TSC topology which depends on the multiterminal switch. To actively track the required reactive power for the dynamic load and to perfectly…

The paper deals with hardware emulation of bio-inspired devices and nonlinear dynamic processes of complex nature by means of mixed-mode analog-digital emulators. The discretized state model of the emulated system serves for real-time calculation of dependent quantities. In contrast to input-output emulation known in control systems, the proposed approach emulates the ports of an electrical…

Pursuit Evasion Game (PEG) is an abstract model of various significant problems that appear in both civil and military applications. Bio- Inspired strategies are found to be very useful in studying the PEG. While optimal response to the pursuit strategies are available using geometric control theory, it is shown in this paper that application of…

Many robots have been proposed for smart applications in recent years However, while these robots have good ability to move between fixed points separated by short distances, they perform less well when required to navigate complex interior spaces with an irregular layout and multiple obstacles due to their relatively crude positioning and path control capabilities.…

Vision-based defect detection techniques are widely used for quality control purposes. In this work, an efficient deflectometry based detection system is developed for semi-specular/painted surface defect detection. This system consists of a robotic arm that carries a screen/camera setup and can detect defects on large surfaces with different topologies, such as a car bumper, by…

The main importance of solar photovoltaic energies research is to meet the many environmental demands of the energy challenge, to maximize power and to reduce the costs of photovoltaic (PV) systems to reply the energy needs of population. In the present research work, the first objective is to study the performance and the output energy…

Recently, wireless sensor network (WSN) gets more concern due to the robustness in the latest communication technology iteration such as big data, IoT and 5G. Such daily usage of these technologies includes smart home, smart farming, smart traffic control etc. Moreover, WSN becomes the best preference for mobile objects in data accumulating in a wild…

It is high time to control and prevent power theft by manipulating the meter reading and tampering of the meter. It is possible to deal power theft by developing Advanced Metering Infrastructure (AMI) and smart grids. For most of the distribution companies, utility smart meters’ data is serving as wealthy source of information beyond billing.…

We examine design principles from more than 20 years of experience in the implementation and protection of mission critical flight systems used by the Mission Design and Navigation Section at NASA’s Jet Propulsion Laboratory. Spacecraft navigation has rigorous requirements for completeness and accuracy, often under critical and uncompromising time pressure. Fault tolerant and robust design…

STATCOM a shunt connected Flexible Alternative Current Systems (FACTS) device using for fast control of voltage and reactive power control in the power grid. To optimize Nouakchott power system at 2030 year, we anticipate both generation and demand grow. A set of nonlinear equations are solved through Newton Raphson method and programmed in PSS/E and…